Dave,
Is it that you don't have enough TX gain?What mode are you in, SSB,
Digital?Make sure your power supply is working correctly, check
the internal voltage with the ctrl - shift - i.
If it doesn't straighten out, go to the Help Desk link of
FlexRadio.. You can turn in
Dave,
Based on your problem description of your issue, it looks like a
possible hardware problem, but some further troubleshooting activities
will be needed to confirm this assumption.
Please submit a support ticket via our HelpDesk
(http://helpdesk.flexradio.com) so we can assign you a case
After behaving itself for a couple of weeks, my F3K has gone on the
Fritz again. The only symptoms are 0w output power and the panafall
display shows a pink/red/yellow transmit bar, not the standard all
pink when things are working. What I have tried: Power off
(complete) F3K for 2', PC rebo
f Of Dave Gomberg
Sent: Sunday, October 23, 2011 10:15 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Did I break my radio?
Thanks to a couple of list members, I have "resolved" my problem in a
strange (to me) way:
Both off-list responders focused on database issues, so I:
Thanks to a couple of list members, I have "resolved" my problem in a
strange (to me) way:
Both off-list responders focused on database issues, so I:
1. Checked that the problem was still present, it was
2. Did a SETUP->Factory defaults, creating a backup copy of the database
3. Tried the fac
Make sure your power supply is supplying the correct voltage. 73. Paul w8jn
Sent from my HTC Touch Pro2 on the Now Network from Sprint®.
-Original Message-
From: Dave Gomberg
Sent: Sunday, October 23, 2011 5:48 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Did I break my radio
Dave,
The 1st thing to try in any situation like this is a database reset.
Occasionally, I have had this happen & a database reset to factory defaults
always brings the radio back to life. Then I use SDRDataTransfer to restore
my custom settings after testing the radio with the default database.
Dave -
For further information, I would try some stuff with a dummy load and an
external wattmeter. I don't think you broke it, I have seen something of
the sort with my 5K which has always been cleared up (apparently - I was
never able to reliabily reproduce the problem) by playing with Windows.
Yesterday I had my first session with my F3K using PSDR 2.2.3 on
10m. It was long, and the antenna swr was only so-so (1:2.2 or
so). Then I started seeing Fwd Pwr on the meter at 0. It seems
slightly intermittent, but mostly 0w. Same symptom with PTT or
MOX. What else should I try? Did I
9 matches
Mail list logo
