Re: [Flexradio] Flex 5000A sidebands reversed?

2012-12-13 Thread Dave Beumer WØDHB
Tim Antennas disconnected or is a dummy load ok ? Dave -Original Message- From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison Sent: Thursday, December 13, 2012 10:46 AM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Flex 5000A sidebands reversed

Re: [Flexradio] Flex 5000A sidebands reversed?

2012-12-13 Thread Gordon P. Howell, Jr.
Newly reset database, and I think the antennas were disconnected, but I will run it again to make sure On Dec 13, 2012, at 12:46 PM, Tim Ellison wrote: > Did you use a newly reset database for the test and disconnect your antennas > before running it? If not the test results may be incorrect.

Re: [Flexradio] Flex 5000A sidebands reversed?

2012-12-13 Thread Tim Ellison
Did you use a newly reset database for the test and disconnect your antennas before running it? If not the test results may be incorrect. Tim Ellison On 12/13/2012 12:08 PM, Gordon P. Howell, Jr. wrote: This suggestion worked although I saw a lot of "fails" during the all tests portion. I di

Re: [Flexradio] Flex 5000A sidebands reversed?

2012-12-13 Thread Gordon P. Howell, Jr.
This suggestion worked although I saw a lot of "fails" during the all tests portion. I did the image recal for both transmitter and receiver and things seem to be normal at this point. Thanks all who sent suggestions. Geep On Dec 12, 2012, at 11:18 AM, Ken Buser wrote: > Gordon, > > Did yo

Re: [Flexradio] Flex 5000A sidebands reversed?

2012-12-12 Thread Brian Lloyd
On Wed, Dec 12, 2012 at 8:07 AM, Gordon P. Howell, Jr. wrote: > First thing I tried, but thanks for the suggestion. Made no difference. > > Anyone else have any ideas?? > This would happen if the I and Q channels got swapped. Have you tried fully removing the power from the 5000 for about a minu

Re: [Flexradio] Flex 5000A sidebands reversed?

2012-12-12 Thread Gordon P. Howell, Jr.
First thing I tried, but thanks for the suggestion. Made no difference. Anyone else have any ideas?? On Dec 11, 2012, at 9:03 PM, Graham Haddock wrote: > Gordon: > > I would start by resetting the database to the factory defaults, if you have > not done so. > > --- Graham / KE9H __

Re: [Flexradio] Flex 5000A sidebands reversed?

2012-12-11 Thread Graham Haddock
Gordon: I would start by resetting the database to the factory defaults, if you have not done so. --- Graham / KE9H == On Tue, Dec 11, 2012 at 4:30 PM, Gordon P. Howell, Jr. wrote: > Has anyone had the situation where upper sideband button is apparently > lower and lower is upper? I loaded 2.

[Flexradio] Flex 5000A sidebands reversed?

2012-12-11 Thread Gordon P. Howell, Jr.
Has anyone had the situation where upper sideband button is apparently lower and lower is upper? I loaded 2.5.3 today with no errors and when I brought up the radio, it became apparent that the sideband buttons (and that's all of them, CW,Digital, any that use sideband as opposed to AM or DSB)