Hi Zack
I would start with the Heil profile you have, and then go through the audio
chain alignment. I would also keep the EQ flat as the Heil mics have
already been eq'd so to speak for SSB communications.
I am sure you have read this:
http://www.heilsound.com/amateur/products/prosetelite/.
Al
I am going to order a Heil Proset Elite for use with my 5000 and would like to
know what would be good starting points to set for the RX & TX EQs.
Can one of the PSDR scope displays be used to make these adjustments?
The headset will be mainly used for DXing.
73
Zack
N8FNR
_
Hi Zack
I have the Heil Proset Elite and like it a lot. I have had good on-air
reports about it. At first I found it a bit uncomfortable out of the
box, but after adjusting it I have not had any problems with it. I
tried the Proset-4 at the store while listening to a Flex 5000A and I
felt
I need to get a new headset for use with my 5000 and am looking for opinions
from others who own the current Heil headsets. I would like to get either the
Proset or the Elite. If you own either what do you like or dislike about it?
How adjustable are they (my head is large)? Which element do y
Thanks Ray
-Original Message-
From: K9DUR [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 12, 2007 9:49 PM
To: 'Dave Beumer WA3FDB'; 'FireBrick'; 'FlexRadio List'
Subject: RE: [Flexradio] Heil ProSet
Dave,
There are 2 Heil adapter cables for Yae
Dave,
There are 2 Heil adapter cables for Yaesu radios: AD-1Y (8-pin round
connector) & AD-1M (8-pin modular connector). You need the AD-1Y for the
SDR-1000 or the Flex-5000.
73, Ray, K9DUR
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http:
A3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of FireBrick
Sent: Wednesday, October 31, 2007 6:44 AM
To: FlexRadio List
Subject: [Flexradio] Heil ProSet
I currently ONLY use a Heil Proset, with the 'DX' cartridge.
I have the Heil Yaesu adapter
Oops, you're right! Leave it to Icom to make simple things hard. My non-Icom
Proset is the best accessory I'm ever bought.
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071031/30585099/at
I currently ONLY use a Heil Proset, with the 'DX' cartridge.
I have the Heil Yaesu adapter (RED)
It works perfectly with the F5Ka.
I even feed the Proset 'THROUGH' my MFJ DVK for recording contest buffers.
Output of the DVK plugs into the F5Ka directly.
Full VOX or PTT operation, good audio repor
I've used the Heil ProSet/C5 with the SDR-1000 and Delta-44 for over 6 months
and when correctly adjusted have had absolutely praise reviews from all. The
most important setting is the EQ provided within the PowerSDR software,
although all other settings listed below enhance the signal. I plug t
Indeed I do use the ProSet with my SDR-1000. I plug directly into
the Delta 44 IN3.
The Yaesu Heil adapter with the pistol grip PTT will not work
without some changes. Also you should be aware of the internal wiring
between the front panel MIC jack and the rear panel MIC jac
o.biz
Subject: Re: [Flexradio] Heil ProSet with the SDR-1000 and Delta-44
Tom,
I am using the Heil ProSet Plus with the Delta-44 card.
I found that it does need a pre-amp. Otherwise, the mic gain has to be
set too high & I get some instability. I use an NCS Multi-Switcher to
switch the headset b
Tom,
I am using the Heil ProSet Plus with the Delta-44 card.
I found that it does need a pre-amp. Otherwise, the mic gain has to be set too
high & I get some instability. I use an NCS Multi-Switcher to switch the
headset between my SDR & my FT-847. The Multi-Switcher includes a pre-amp for
Is anyone using a Heil ProSet with the SDR-1000 and Delta-44? Do you plug
it into the SDR-1000 front panel or the sound card? Does it require a
pre-amp? Also, which adapter is required?
Thanks,
Tom N4WBS
-- next part --
An HTML attachment was scrubbed...
URL:
> John P. Basilotto
> W5GI
> Marketing and Product Manager
> FlexRadio Systems
> Office 512-250-8595
> Mobile 512-663-6727
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Jim, W4ATK
> Sent: Saturday, August 19, 2006 2:5
rday, August 19, 2006 2:59 PM
To: Flex-radio Reflector
Subject: [Flexradio] Heil Proset and SDR-1000
If anyone out there is using the Heil Pro Set with the SDR-1000 I
would
appreciate knowing how you have it hooked up. I bought the YAESU adapter but
it does not match up with the diagram on
If anyone out there is using the Heil Pro Set with the SDR-1000 I would
appreciate knowing how you have it hooked up. I bought the YAESU adapter but
it does not match up with the diagram on page 11 of the manual. I have tried
to rewire the adapter but still no joy other than PTT.
H
17 matches
Mail list logo