Re: [Flexradio] Help with digital

2011-10-12 Thread Al K0VM
: Brian Cc:FlexRadio@flex-radio.biz Subject: Re: [Flexradio] Help with digital Message-ID: Content-Type: text/plain; charset=ISO-8859-1 Better write Bill Gates! Its Windows doing it, you just have to periodically check to make sure its okay! 73 On Tue, Oct 11, 2011 at 10:20 PM, Brian wrote

Re: [Flexradio] Help with digital

2011-10-11 Thread Neal Campbell
Better write Bill Gates! Its Windows doing it, you just have to periodically check to make sure its okay! 73 On Tue, Oct 11, 2011 at 10:20 PM, Brian wrote: > On 10/11/2011 22:58 PM, Brian wrote: > >> Have had digital modes working in the past. Was trying to snag T32C >> yesterday on RTTY, but

Re: [Flexradio] Help with digital

2011-10-11 Thread Brian
On 10/11/2011 22:58 PM, Brian wrote: Have had digital modes working in the past. Was trying to snag T32C yesterday on RTTY, but they failed to copy me. Tried again this afternoon. Clicked on MMTTY and after it came up, up popped: "Can't open Sound card (2)" Why has it forgotten? Where have

Re: [Flexradio] Help with digital

2011-10-11 Thread Neal Campbell
Usually that means MMTTY has forgotten what the output and input sound card assignments should be. Go to MMTTY Options and click on the Sound card tab and see if they are set correctly for your system! 73 On Tue, Oct 11, 2011 at 6:58 PM, Brian wrote: > Have had digital modes working in the past

[Flexradio] Help with digital

2011-10-11 Thread Brian
Have had digital modes working in the past. Was trying to snag T32C yesterday on RTTY, but they failed to copy me. Tried again this afternoon. Clicked on MMTTY and after it came up, up popped: "Can't open Sound card (2)" Why has it forgotten? Where have I gone wrong? Any clues out there in F

[Flexradio] Help with Digital Mode and Hamscope

2007-10-08 Thread Doug McCann
DUH...you have to turn up the TX gain on the Digital Specific controls on the front control panel. I tested the unit again with a lower reading watt meter and found a small amount of RF going out. Then I boosted the TX gain control and "voila" have output. Band conditions are so bad at the moment,

[Flexradio] Help with Digital Mode and Hamscope

2007-10-08 Thread Doug McCann
I cannot get my SDR-1000 to transmit on digital. It receives, the rig will key up, and a signal is showing on Hamscope, but there is no drive to the radio nor RF out. My setup is: Edirol, VAC, NV8Com, TRX Manager as logging program that Hamscope uses to key the rig. I have tried the same thing wi