I am having trouble getting K9DUR's Voice Keyer program to work properly
with my Flex-3000 (PowerSDR 2.2.3). Using DDUtil and VSP manager.
I have successfully recorded a WAV file using my Flex-3000 microphone
and modified it according to instructions, using Audicity. I was able to
successfully import this WAV file into Voice Keyer and can hear it
through my computer's headphone output when I click the test button in
Voice Keyer's Setup Profiles box.
In Voice Keyer's Hardware Setup box, I selected Virtual Cable 2 to send
messages to the radio (Virtual Cable 2 is my input to the Flex-3000),
Primary Sound Driver is designated to monitor messages, PTT Serial Port
is set to COM5 with DTR and RTS both checked. The radio's PTT is enabled
and setup correctly.
When I click the configured message box in Voice Keyer, the Flex-3000
WILL key up properly. However, the radio is obviously NOT getting the
message from Voice Keyer since there is NO modulation, therefore NO
watts going out. I can hear the message however through the computer's
headphone jack. In Voice Keyer's Hardware Setup, I switched to Virtual
Cable 1 instead of Virtual Cable 2 with NO success.
Obviously, I have something configured wrong. Any help would be appreciated.
Gary Robertson
W5SAT
groberts...@austin.rr.com
512-267-0336
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/