The problem I had before was that it would appear to run ok,
then after some undefined time it would lock up PowerSDR, you could
stop and restart PSDR and all would be ok until the next time.
This was more than annoying in a contest.
comOcom was not available then so I went with the commercial vers
Dave, et.al.,
N8BV vCOM does work in Vista. However, the configurator does NOT work
properly. vCOM will work fine under Vista as long as you use the serial
port pairs it sets up by default. You can use the configurator to
enable/disable pairs of serial ports, but you cannot change the port
numb
Monday, July 28, 2008 8:31 PM
Subject: Re: [Flexradio] N8BV vCOM Driver with Vista problem
> Try Com0Com
> http://kb.flex-radio.com/article.aspx?id=10481
> http://kb.flex-radio.com/article.aspx?id=10482
>
>
> -Tim
>
> -Original Message-
> From: [EMAIL PROTECT
Don't waste your time
N8BV vCom driver does not work in Vista.
This has been covered before and is probably
in the knowledge base.
Dave - N4DWK
Gary - W7FG wrote:
> I''ve
: [Flexradio] N8BV vCOM Driver with Vista problem
I''ve been trying to use N8BV vCOM Driver with Vista and have ran up against
Brickwall. It loads fine and all looks fine but serial port configuration
doesn't seem to work.
Anyone had success with the N8BV vCOM Driver using Vist
I''ve been trying to use N8BV vCOM Driver with Vista and have ran up
against Brickwall. It loads fine and all looks fine but serial port
configuration doesn't seem to work.
Anyone had success with the N8BV vCOM Driver using Vista?
Gary - W7FG
___
6 matches
Mail list logo
