Thanks to all the suggestions. I will first check to see if there is a
parallel port on the board, and, if not, will see about ordering another PP
card. This may take me a month or so since I just broke my arm in a tractor
accident and can only use one hand. Fortunately it is not the hand I u
>Further, check where the headers go. I have a couple of boards that the
>header goes to chips that were not installed!!
Absolutely. VERY common.
> You have to wonder why they went to all the trouble to engineer these
> ports and then make them unusable.
There are lots of things that are eng
Bill
I don’t know anything about the device you listed but if you check the Flex.WiKi
There is an area for known good parallel printer ports. You are correct not
all of the newer
printer ports will work especially if you are using Windows 7 – 64. Anyway I’m
using a SIIG
2S1P Combo board. P/N
ll
> Sent: Sunday, June 19, 2011 8:26 PM
> To: Tony Estep
> Cc: flexradio@flex-radio.biz
> Subject: Re: [Flexradio] Parallel Port for F3K
>
> I haven't seen a motherboard in ages that didn't include headers for a
> serial port, parallel port, several USB ports and somet
I haven't seen a motherboard in ages that didn't include headers for a
serial port, parallel port, several USB ports and sometimes 1394. The
problem is that none of them use the same header spacings for the ports,
plus stick them so far away from where the slot strips are on the computer
case that
On Sun, Jun 19, 2011 at 8:00 PM, Bret Mills wrote:
> ...Some mother boards actually have a Parallel port on them but NO Cable /
> DB25
> connector output to the case...
>
> =
Bret makes a very good point. This is also true of IEEE ports. If you build
your own computer, check your mobo fo
lps some one out.
73's
Bret WX7Y
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of William Evans
Sent: Sunday, June 19, 2011 5:35 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Parallel Port for F3K
My computer does
William Evans wrote:
> My computer does not have a parallel port which I need to get the band
> information out to antenna and amplifier switches. I need ABCD info to
> come out of the computer when I use my 3K. Has anyone had any luck with
> this device?: http://www.piexx.com/index.php?main_pa
My computer does not have a parallel port which I need to get the band
information out to antenna and amplifier switches. I need ABCD info to come
out of the computer when I use my 3K. Has anyone had any luck with this
device?:
http://www.piexx.com/index.php?main_page=index&cPath=12
I could pu
9 matches
Mail list logo