Re: [Flexradio] Probably a simple question

008 18:38:37 +1300 > From: "Ross Biggar" <[EMAIL PROTECTED]> > Subject: [Flexradio] Probably a simple question > To: > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="iso-8859-1" > > I would like to use my 1watt SDR1000

Re: [Flexradio] Probably a simple question

I would build something like a DEMI PTT buffer board (which I use) or W1GHZ "fool proof" sequencer with a rf realy. If the radio went into transmit the relay switches out to a dummy load. Of course the relay should be in fail safe mode. Remember to enable X2 TR Sequencing in PowerSDR an

Re: [Flexradio] Probably a simple question

Quoting José Dumoulin <[EMAIL PROTECTED]>, on Sun 16 Mar 2008 11:03:59 PM PDT: > Hi Ross > > Click Setup / General / Hardware Config and check Receive only. > > 73 > > José F5JD > > Ross Biggar a écrit : >> I would like to use my 1watt SDR1000 for reception only. Using the >> panadaptor on the

Re: [Flexradio] Probably a simple question

rp: Re: [Flexradio] Probably a simple question Hi Ross Click Setup / General / Hardware Config and check Receive only. 73 José F5JD Ross Biggar a écrit : > I would like to use my 1watt SDR1000 for reception only. Using the panadaptor > on the 28mhz transverter downlink. > I dont want to tak

Re: [Flexradio] Probably a simple question

Hi Ross Click Setup / General / Hardware Config and check Receive only. 73 José F5JD Ross Biggar a écrit : > I would like to use my 1watt SDR1000 for reception only. Using the panadaptor > on the 28mhz transverter downlink. > I dont want to take the chance of transmitting while receiving. > Wh

[Flexradio] Probably a simple question

I would like to use my 1watt SDR1000 for reception only. Using the panadaptor on the 28mhz transverter downlink. I dont want to take the chance of transmitting while receiving. What is the best way to ensure the rig cannot tx. Is there a hardware line I can disconnect? Regards to all Ross ZL1WN