Dave,
I have a similar problem with both SDR1K and Flex5K.
With my SDR1K the nasty spur(or noise?) centered at 14.126 is most prominent.
It rises the noise floor by 10 to 20dB and covers +-10kHz.
Others occur at 3.54, 7.069, 21.186 and each has different level and width.
It looks like a plateau
I am experiencing strange problems with my SDR-5000, which have just
recently appeared. Before I contact Flex directly, I thought I would
ask here and see if anyone has experienced a similar situation.
The most visible problem is that a very broad and nasty spur has
appeared on 160 meters. It
I have reloaded the Firewire driver and latest firmware in an attempt
to get a fix on my problem. Now, whenever I attempt to start a clean
and new PowerSDR, it gives the usual message of transferring data
from the EEPROM, then stops and gives the message Bad Data detected
in EEPROM, PA Power
Dave,
There will be some anomalies that you might see either connected to a
dummy load or without an antenna that lay in the noise floor because
the noise floor is so low. Most radios might not even hear or see
their noise because the noise floor is higher and covers these sort
of things
4 matches
Mail list logo
