eiver is -29 to -30dB.
Again, thanks a lot and 73.
Eddy ON5UQ.
- Original Message -
From: "Brian Lloyd" <[EMAIL PROTECTED]>
To: "Eddy Van de Velde" <[EMAIL PROTECTED]>
Cc: ; "Tim Ellison" <[EMAIL PROTECTED]>
Sent: Thursday, October 30,
: "Brian Lloyd" <[EMAIL PROTECTED]>
To: "Tim Ellison" <[EMAIL PROTECTED]>
Cc:
Sent: Thursday, October 30, 2008 9:20 PM
Subject: Re: [Flexradio] TX in Digital Mode
On Oct 30, 2008, at 6:00 PM, Tim Ellison wrote:
Excellent explanation, Brian. I hope you don't mind
On Oct 30, 2008, at 6:00 PM, Tim Ellison wrote:
Excellent explanation, Brian. I hope you don't mind that I used
your description below for a KC article. I did give you the
appropriate credit, so it isn't technically plagiarism :-)
BTW Tim, I looked in the PSDR manual to see what it says
On Oct 30, 2008, at 6:00 PM, Tim Ellison wrote:
Excellent explanation, Brian. I hope you don't mind that I used
your description below for a KC article. I did give you the
appropriate credit, so it isn't technically plagiarism :-)
You are welcome and no worries, Tim. Please use it as you
On Oct 30, 2008, at 4:19 PM, FireBrick wrote:
Brian
this scares meI 'Think' I understand what you said...
but
one thing confuses me
usually I'm too dense to be confused
And that is my fault because I wasn't careful to make sure I was
naming things correctly. (I was at school and didn't
October 30, 2008 6:29 PM
To: Eddy Van de Velde
Cc: flexradio@flex-radio.biz; Tim Ellison
Subject: Re: [Flexradio] TX in Digital Mode
On Oct 30, 2008, at 8:18 PM, Eddy Van de Velde wrote:
>
> Tim,
>
> Can you give some information why it is preffered to leave the Drive
> at 100 Watts an
On Oct 30, 2008, at 8:18 PM, Eddy Van de Velde wrote:
Tim,
Can you give some information why it is preffered to leave the Drive
at 100 Watts and turn the RF output down with the TX Audio Gain ?
I use to set the Drive to 30 Watts in PSK on my SDR-1000 and leave
the TX Audio Gain unchange
ON5UQ.
- Original Message -
From: "Tim Ellison" <[EMAIL PROTECTED]>
To: "Val Walker" <[EMAIL PROTECTED]>; "Flex Reflector"
Sent: Thursday, October 30, 2008 4:08 AM
Subject: Re: [Flexradio] TX in Digital Mode
You didn't indicate what radio
Reflector
Subject: [Flexradio] TX in Digital Mode
I am having problem with PSK and RTTY TX. When set to DIGU and I go by the
manual to set the TX Meter to ALC and VAC TX Gain to I get a TX Meter ALC
value of 0 or less, I get no Power out (Drive set to 45).
Now, if I assume the manual is wrong or I
PSK31 IMD for this configuration should be between -30 and -32 dB when
measured with an external device.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Val Walker
Sent: Wednesday, October 29, 2008 10:15 PM
To: Flex Reflector
Subject: [Flexra
I am having problem with PSK and RTTY TX. When set to DIGU and I go by the
manual to set
the TX Meter to ALC and VAC TX Gain to I get a TX Meter ALC value of 0 or
less, I get no
Power out (Drive set to 45).
Now, if I assume the manual is wrong or I am reading it wrong and set TX
Gain to 6, all is
11 matches
Mail list logo
