When the rig is on, press the power button so that it is fully
depressed. Wedge a wooden toothpick (or two) into the front panel
chassis power switch hole between the side of the hole and the plastic
power button to wedge the power button in the fully depressed position.
Now when you 13.8 VDC power supply on and off the FLEX-5000 it will also
turn on and off.
WARNING: Make sure you have a very clean power supply that does not have
a transient power spike or surge when you turn the 13.8 VDC supply. Any
damage from this technique to the FLEX-5000 might not be covered under
warranty.
This isn't necessary with the FLEX-3000 since the power button is not
the "press and release" type, but the above warning is still applicable.
-Tim
--
W4TME
FlexRadio Systems - Info Management Admin.
"Tune in Excitement"
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/