Several months ago, during the Central States VHF Conference I agreed to take on the project which had been started in early 2005.
At this time I have just ordered the Alpha Prototype boards and anticipate that all will be well and I can begin ordering parts for the UCB kit. My question is how many to plan for? Are you interested? Herein you will find a description of the capabilities of the Board. When the Alpha boards arrive my plan is to test here at my place and send one to Mike King KM0T to test, as he has been the sole user of the UCB for all of these intervening months since the inception of the idea of a UCB. The price for the whole kit will be 99 dollars plus shipping. When I have the first of the boards complete, I will make photos available on my website. I have trimmed the price from the original by eliminating the pic chip. In addition, working with Eric at Flex, we are anticipating enhancements to PowerSDR to tap the increased capabilities of the UCB. Please tell me of your interest in the UCB. Here are the specs: The Universal Controller Board (UCB) is intended to allow users of the SDR-1000 to control a large multi-band station. This board causes a relay to activate based on what band is currently active. Future versions of PowerSDR will allow different (relay) output selections based on the portion of the band or antenna selection (such as four square or beverage) as well. The UCB system connects to the X2 external control connector and has the ability to expand to four UCB boards for a total of 64 output controls. In addition to DPDT relay outputs for each selection a DPDT output is provided for PTT activation. PowerSDR is programmed to control all aspects of the UCB. The UCB will be available as a complete kit of parts, a kit without relays, or the PCB only. All construction is thru-hole with no surface mount components. Size: 7.0 X 3.6 inches Power Required: 12 VDC Inputs: DB-15 from X2 2.1 mm for DC in 6 pin .1 inch connector for PTT input Outputs: DB-15 for X2 to next UCB 16 - 6 pin .1 inch connector for selected output 6 pin .1 inch connector for PTT output Includes: Provision for bonding SDR ground and UCB ground Output for both PTT inputs, Main and Secondary Opto-Isolation for all X2 outputs, 1-7 DC input PCB pads in addition to connector Input and Output (15pin) jack for X2 Jumper selectable outputs that allow unlimited combination of relay (output) selection Thank you, Phil K3TUF FN10we _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com