Tim
to look at so he has a full understanding of what it is doing.
Thanks for the Reply
73
Craig
W1MSG
-Original Message-
From: Ross Stenberg [mailto:ross.stenb...@charter.net]
Sent: Monday, February 27, 2012 11:57 AM
To: Craig Gagner
Subject: Re: [Flexradio] Unusual Issue
I suggested
o.com/entries/21066642-resolve-psdr-problems-very-important
and vote Me Too
> From: crgag...@charter.net
> To: flexradio@flex-radio.biz
> Date: Mon, 27 Feb 2012 07:36:50 -0500
> Subject: [Flexradio] Unusual Issue
>
> Fresh boot on computer, bring up PSDR in single RX mode, s
r is still
where it was set.
Thanks
Craig
_
From: Jim Jannuzzo [mailto:jsqu...@msn.com]
Sent: Monday, February 27, 2012 10:12 AM
To: crgag...@charter.net; flexradio@flex-radio.biz
Subject: RE: [Flexradio] Unusual Issue
Craig,
I do. There's apparently a bug in the RX2 /
bruary 27, 2012 8:52 AM
To: Craig Gagner; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Unusual Issue
Gentlemen,
Over the past three years or so I've read dozens of PC-PowerSDR "events" and
I think that at one time or another I've experienced nearly all. If they
don't
; Date: Mon, 27 Feb 2012 07:36:50 -0500
> Subject: [Flexradio] Unusual Issue
>
> Fresh boot on computer, bring up PSDR in single RX mode, start the 2nd RX
> and tune in a signal. Now when I click the TX on the VFO B the volume goes
> way up and the signal is gone. If I shut the soft
information or suggestions to the original post.
73
Craig
W1MSG
-Original Message-
From: Lee Mushel [mailto:herbe...@centurytel.net]
Sent: Monday, February 27, 2012 8:52 AM
To: Craig Gagner; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Unusual Issue
Gentlemen,
Over the past three y
Lest not forget about those of use that use their SDR computer for a
multitude of uses including internet access and allow every automatic
update that do not experience any problems.
I believe that we are the silent majority.
Since I have chosen to have separate computers for my 5000A, 3000 a
I second your motion, Lee. I've not had ANY of the problems described
here (TBTG!) and I use my system for internet and some heavy
floating-point processing, usually with PSDR running in the
background.
OK, I've been lucky. But what concerns me a bit is that problems that
clearly are the consequ
Gentlemen,
Over the past three years or so I've read dozens of PC-PowerSDR "events" and
I think that at one time or another I've experienced nearly all. If they
don't persist I have always assumed that they are the result of infrequent
interactions between the software, firmware and maybe eve
Fresh boot on computer, bring up PSDR in single RX mode, start the 2nd RX
and tune in a signal. Now when I click the TX on the VFO B the volume goes
way up and the signal is gone. If I shut the software down and bring it back
up, the volume is normal and the signal is there again and I am able to T
10 matches
Mail list logo