Matt and others,
I have read all in the thread, my one addition is that I noticed that you
are running VAC 4.10. There were and has been timing and buffering issues
that degrade over time with the 4.10 version.. You might want to try the
4.09 version instead, and you will need the signed ver
I don't think I am having conversion problems since I have all programs
set to 48k though. Based on the experiences of others recounted here so
far, I would anticipate that my 48k recordings going from N1MM over VAC
and through PSDR all set to 48k would work.
But it sounds like there's a serio
If using Vista or Win7, make sure the default format sampling rate for
the Windows VAC sound devices (playback and record) matches what you
use for the VAC. The default is 44.1 KHz which forces Windows to do an
up-conversion to 48KHz
Right click on the actual sound device and select Properti
I noticed something similar running MARS-ALE with my Flex-3000. I didn't
find a solution and eventually gave up.
George, PJ5/KJ6VW
On 05-Jul-11 11:44, kd0...@gmail.com wrote:
Hi,
I originally posted a version of this to N1MM's reflector, but further
troubleshooting points to PowerSDR so I'll c
ginal Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of kd0...@gmail.com
Sent: Tuesday, July 05, 2011 8:44 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Voice keyer through PSDR truncates end of audio on output,
progressive worsenin
Thanks for the suggestion Ray. I tried both larger (up to 300) and
smaller (down to 20) values, and the problem persists, including the
way it gets worse over time.
On Tue, Jul 5, 2011 at 10:55 AM, Ray, K9DUR wrote:
> AI1P,
>
> Go to the Setup|Audio|VAC form, check "Manual Latency", & try adjusti
AI1P,
Go to the Setup|Audio|VAC form, check "Manual Latency", & try adjusting the
value. This cured a similar problem that I had with my VoiceKeyer program.
73, Ray, K9DUR
http://k9dur.info
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.bi
Hi,
I originally posted a version of this to N1MM's reflector, but further
troubleshooting points to PowerSDR so I'll continue my quest here.
Environment:
Windows 7 64bit
N1MM Logger V11.6.4
FlexRadio Flex-3000 with PowerSDR 2.0.22
Playback occurs over Virtual Audio Cables (VAC) 4.10.0.2537
I wa
8 matches
Mail list logo