Hi Ernest,
I have not contributed to the software effort of WSJTX other than to
provide a bit of feedback to K1JT. I am a user of the program and
upgrade whenever a new version is available. All praise for the program
goes to K1JT, the team of software contributors and beta testers.
I am cop
When you look at the VAC control panel, you should have two lines
configured. One is how the Flex receives the audio from the PC and one
is how it transmits the audio to the PC. They are both configured
identically to each other. They aren't separate VAC's they are "Line 1
and Line 2". Go into
I have a couple of problems with running WSJT on the transmit side which the
experts may be able to help. I have a Flex1500 which on 50 MHz drives a
Mirage 1016 amplifier to a useful 100 watts output.. The latter is keyed via
a small relay connected to the Flexwire socket. My computer is a Compa
: [Flexradio] WSJT tries to start and just shuts down with a runtime
error
When I try to start WSJT it just comes up with a runtime error and shuts
down. Sometimes it just flashes, shuts down and does not display any errors.
In the past I would just reinstall it but that gets to be a pain if you have
When I try to start WSJT it just comes up with a runtime error and shuts down.
Sometimes it just flashes, shuts down and does not display any errors. In the
past I would just reinstall it but that gets to be a pain if you have to do
this every few days.
Any suggestions as to what is going wro
an"
To: "Flex-radio Reflector"
Sent: Wednesday, December 12, 2012 8:54 PM
Subject: [Flexradio] WSJT in Flex
I know it's been done before by mortal man. Even I've done it in the
past.
How do I convince Flex and WSJT to play together nicely?
Below is the screen from WSJT sh
re why you were trying the other combos. If you're running
> JT65 on hf then get JT65-HF, much easier to setup and run.
>
> Ron
> K0IDT
>
>
> - Original Message - From: "Brian"
> To: "Flex-radio Reflector"
> Sent: Wednesday, December 12, 2
dio Reflector"
Sent: Wednesday, December 12, 2012 8:54 PM
Subject: [Flexradio] WSJT in Flex
I know it's been done before by mortal man. Even I've done it in the past.
How do I convince Flex and WSJT to play together nicely?
Below is the screen from WSJT showing my ports.
On the FLEX Set
I know it's been done before by mortal man. Even I've done it in the past.
How do I convince Flex and WSJT to play together nicely?
Below is the screen from WSJT showing my ports.
On the FLEX Setup Audio/VAC 1 I have VAC 1 Enabled with
Driver: Windown WDM-KS
Input: Virtual Cable 1
Output: Virt
un...@flex-radio.biz] On Behalf Of Brian
Sent: Thursday, August 09, 2012 5:27 PM
To: Flex-radio Reflector
Subject: Re: [Flexradio] WSJT on the Flex 5000
I think I finally got it to respond. Noticed that VAC was in the "OFF"
position!! Now have the waterfall I'm used to seeing. I
It was very frustrating. I'd like to try EME.
I've never done it and I noticed that D64K is
going to use 6m, so I thought I'd try to set up
for it and ran into the same situation you have.
Good Luck,
Ned, K1NJ
--- On Wed, 8/8/12, Brian wrote:
From: Brian
Subject: [Flexradi
Hello Brian:
I've been using the Flex 5000 with WSJT for a couple of years now. The
program sits idle until you click AUTO or MONITOR. Your sound card
selection might be correct, but you won't see any waterfall activity
until you activate the program.
Tony -K2MO
On 8/8/2012 11:33 PM, Bria
Trying to run WSJT on my Flex 5000.
I selected Line 2 which is Audio Device 2 for Audio In
and Line 1, which is Audio Device 11 for Audio Out. Using Device 4 fails.
Not seeing anything on the decode screen, and adjusting the volume has no
affect on the Rx Noise screen (-39 dB) or the other scre
Yes, exactly. Happens in all versions. I think that it is caused by
latency inherent to the software and design by nature of the software
defined system. Likely unavoidable since it takes cpu cycles to process
everything in software vs analog circuits. Analog circuits being almost
instantano
Steve,
Check your VAC settings, I don't remember the audio sample rate in
WSJT, but by default VAC starts at 22050 and many of our programs start
at 11025 sample rate, some at 12000. These mismatches cause buffer
over/under runs and will cause drop outs in the VAC transfer from
PowerSDR
is there a cpu use spike?
ie outlook checking mail, or antivirus checking for updates or similar
--
From: "Steve Kallal"
Sent: Sunday, January 10, 2010 2:18 AM
To: "'FlexRadio reflector'"
Subject: [Flexradio] WSJT r
I have an issue w/ my FLEX-5000A experiencing a receiver drop out w/ WSJT7.
It doesn't seem like an audio drop per se. The receiver cuts out from a
split second. The timing is irregular. It can happen every few seconds to
once every few minutes. It is even worse w/ the JT65-HF program by W4CQZ (ex
ARGH! RTF Knowledge Center!
Adjust the PowerSDR VAC RX Gain until you achieve a signal input reading of
between -4 and 0 dB.
http://kc.flex-radio.com/KnowledgebaseArticle50362.aspx
Mark Lunday
WD4ELG
Greensboro, NC - FM06be
wd4...@arrl.net
http://wd4elg.net
http://wd4elg.blogsp
I have WSJT properly configured, it is working on the HF bands. When I go
over to 6 meters with my F3K, the WSJT RX noise level (should be around 0
db) frops to -37 dB. How can I increase audio out via SDR so that I get a
level of zero dB in WSJT? I can do this no prob on the lower bands.is it
s
Jordan
Be sure PowerSDR is running with VAC enabled before bringing up WSJT.
Dave W0DHB
Jordan wrote:
Hi...I'm trying to get my Flex up and running on WSJT, but I can't get to the
setup screen ...I get the following:
WSJT7 Error: Invalid number of channels
-9998etc.
WSJT7 immediate
Hi...I'm trying to get my Flex up and running on WSJT, but I can't get to the
setup screen ...I get the following:
WSJT7 Error: Invalid number of channels
-9998etc.
WSJT7 immediately halts, and starts the error reporting process.
I can see which ports to select, Virtual1 and 2 , but I
:31:23 -0400
From: Tim Ellison
Subject: Re: [Flexradio] WSJT and PowerSDR using VAC
To: Phil Theis , "flexradio@flex-radio.biz"
Message-ID:
Content-Type: text/plain; charset="us-ascii"
OK. That is good for the VAC version. I had problems getting other ver
52 PM
To: Tim Ellison
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] WSJT and PowerSDR using VAC
WSJT v.7.03
VAC v.4.9.0.1652
PowerSDR 1.19.1 test branch svn 3065
Tim Ellison wrote:
What version of WSJT and VAC are you using? WSJT is very particular about the audio interface setup.
://kc.flex-radio.com/KnowledgebaseArticle50362.aspx
I would check this first.
-Tim
-Original Message-
From: Phil Theis [mailto:p...@k3tuf.com]
Sent: Thursday, June 11, 2009 1:52 PM
To: Tim Ellison
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] WSJT and PowerSDR using VAC
WSJT v.7.03
VAC
-radio.biz] On Behalf Of Phil Theis
Sent: Thursday, June 11, 2009 1:05 PM
To: Tim (W4TME); flexradio@flex-radio.biz
Subject: [Flexradio] WSJT and PowerSDR using VAC
I am having an issue getting this configuration to work.
VAC is set up and PowerSDR is setup.
I am receiving just fine.
But when I go
); flexradio@flex-radio.biz
Subject: [Flexradio] WSJT and PowerSDR using VAC
I am having an issue getting this configuration to work.
VAC is set up and PowerSDR is setup.
I am receiving just fine.
But when I go to transmit I do not get tx audio. Radio keys ok.
Also, the receive takes about 15
I am having an issue getting this configuration to work.
VAC is set up and PowerSDR is setup.
I am receiving just fine.
But when I go to transmit I do not get tx audio. Radio keys ok.
Also, the receive takes about 15 seconds to recover.
Thoughts please,
Phil K3TUF
___
Of vtnn...@comcast.net
Sent: Tuesday, January 06, 2009 4:37 PM
To: Flex Radio
Subject: [Flexradio] WSJT JT65A - where to set TX gain in VAC?
I have WSJT working on my 5000 but am curious as to how to set the TX gain in
the VAC setting. For PSK31 I use an IMD Meter from KK7UQ (which works great
I have WSJT working on my 5000 but am curious as to how to set the TX gain in
the VAC setting. For PSK31 I use an IMD Meter from KK7UQ (which works great
BTW) and that helps me set my my IMD for <23db. However I have no idea as to
where to set the TX gain for JT65A.
Thanks
Zack
N8FNR
Just to let WSJT fans know, this afternoon, Joe, K1JT, released a new beta
version of his WSJT program with a QSO mode on WSPR. I already made 5 WSPR
qso's with 1 watt on 14.076. Amazing weak signal mode.
The WSJT program operates very well with PowerSDR and the 5K.
But back to cw for now.
7
Hello all wsjt operators
I am looking for some wave files to play with PowerSDR that contain some
wsjt signals... fsk44 or jt65
a quick search didn't yield anything..
Ray J
W9RAY
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-
WSJT articles in the Knowledge Base are:
---
http://kb.flex-radio.com/article.aspx?id=10344
http://kb.flex-radio.com/article.aspx?id=10217
http://kb.flex-radio.com/article.aspx?id=10077
de Ken N9VV
Gerald Capodieci wrote:
> Someone please provide simple definit
, March 15, 2007 2:15 PM
> To: flexradio@flex-radio.biz
> Subject: [Flexradio] WSJT and BCI filter definitions
>
> Someone please provide simple definitions for:
> WSJT and BCI filter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
h
Someone please provide simple definitions for:
WSJT and BCI filter
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070315/24b96ef0/attachment.html
__
After much perserverance, WSJT is now working well with my SDR1000. I need 2
monitors for all the information.
Now to interface it to a 70cm DB6NT transverter amp etc for 70cm EME.
Best wishes to all
Ross
ZL1WN
-- next part --
An HTML attachment was scrubbed...
URL:
/p
AIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison
Sent: Sunday, October 08, 2006 12:52 AM
To: Ross; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] WSJT what am I doing wrong
Ross,
I played with it some and I can tell from the VAC control panel that I
have the VAC chann
o.biz
Subject: Re: [Flexradio] WSJT what am I doing wrong
Yes, thanks for the "heads-up" Tim, but I have been through that info
twice,
with no result.
As I mentioned Mixw works perfectly.
Regards
Ross
- Original Message -
From: "Tim Ellison" <[EMAIL PROTECTED]&g
: Sunday, October 08, 2006 4:18 PM
Subject: RE: [Flexradio] WSJT what am I doing wrong
Have you reviewed the WSJT How To: article on the Knowledge Base (it is
almost as good as Google)
http://kb.flex-radio.com/article.aspx?id=10077
-Tim
---
Tim Ellison
Integrated Technical Services
-Or
Sent: Saturday, October 07, 2006 9:54 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] WSJT what am I doing wrong
I am trying to get WSJT to work with the SDR1000, but I am not having
any luck at all.
I am using VAC 4.03 and it works perfectly with Mixw2, as did 3.1, the
sound card is a Presonus
I am trying to get WSJT to work with the SDR1000, but I am not having any luck
at all.
I am using VAC 4.03 and it works perfectly with Mixw2, as did 3.1, the sound
card is a Presonus Firebox
I start the SDR1000, set it to "on" then start WSJT
I have used the sound mapper in WSJT and get the star
I have started to play with WSJT, I can see that
the SDR1000 will be very good for EME.
Some advice please on setting up WSJT with
powerSDR.
I have VAC and PowerSDR running and "on" as stated
by N4HY in his very helpful instructions on the VAC.
But if I work through the WSJT users guide
inst
41 matches
Mail list logo
