Re: [Flexradio] post-I Internal tuner of Flex-3000

sday, January 09, 2014 3:59 PM To: dwmu...@gmail.com Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] post-I Internal tuner of Flex-3000 Dave, Thanks for the article. Is anyone using a closed loop that will tune on the Flex from 80-10 meters? The length of my antenna and ladder line length may

Re: [Flexradio] post-I Internal tuner of Flex-3000

: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of hmattc...@juno.com Sent: Thursday, January 09, 2014 3:59 PM To: dwmu...@gmail.com Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] post-I Internal tuner of Flex-3000 Dave, Thanks for the article. Is anyone using a closed loop that

Re: [Flexradio] post-I Internal tuner of Flex-3000

Dave, Thanks for the article. Is anyone using a closed loop that will tune on the Flex from 80-10 meters? The length of my antenna and ladder line length may not be cut properly. I am using a closed loop of 262ft fed with ladder line into a 4:1 balun and into a short piece of RG213 int

Re: [Flexradio] post-I Internal tuner of Flex-3000

Dudley, I am running 2.6.4. That is just my experience. May not hold true for others. Thanks Matthew-KJ4TN. P.S. I run remote hams.com also. I was trying to put up an antenna that the internal tuner would tune on all bands. My 262 ft horizontal loop should be a good all band antenna

Re: [Flexradio] post-I Internal tuner of Flex-3000

The tuner in my Flex-3000 will only tune a 3:1 SWR. I use a 262 foot horizontal loop up about 25ft all all four corners. It is fed with ladder line into a 4:1 balun outside my ham shack into 10' of RG-213. My MFJ has no problems on all bands. As to my loop, it only will tune a 3:1 mismatch us

Re: [Flexradio] post

John, don't presume---try the 3000 tuner. You might be surprised. Flex builds quality products, including tuners. Bob, NZ5A Sent from my iPhone On Jan 8, 2014, at 4:28 PM, John Paolucci wrote: [this is my first post - I think this is the way it is done :) ] Antenna hook up question Here

[Flexradio] post

[this is my first post - I think this is the way it is done :) ] Antenna hook up question Here is my situation. I live in a valley location where antennas do not get out well. But I’m in a mountain area where I can drive to nice mountain top locations. So I plan on using the Flex 3000 with a

[Flexradio] Post in error

Please forgive my earlier post. It was intended to be sent to another person who had emailed commenting on this digest. 73, Bob K5SM ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_fl

[Flexradio] Post Contest Report

I'm again the high JARTS scorer in zip code 60706 80&40 were my concentrated effort, as that's where I have the poorest antennas. Although I did work a alltime new rtty band/entity on 15 meters, C9 I concentrated on 'running' and did have a few problems. One problem with HotWheels, you loose the

[Flexradio] Post Filter Noise Blanker?

Dear DSP Craftsmen, Like a lot of unfortunate radio folk, I'm plagued with frequent, strong, pulse type noise. I'm pursuing other methods of eliminating it. This question is specifically about noise blanking in Flex/PowerSDR. Noise Blanking problem: The noise blanker in the sdr1000 and most