[Flexradio] problems with sdr-1000
Message-ID:<1416005755.91585...@webmail.reagan.com>
Content-Type: text/plain;charset=UTF-8
The 1000 was running fine on 2.5.3. went to use the radio today
and once it goes thur its boot and you click the on button on powersdr the
radio goes i
Hello Dale,
It happened to me twice, one was due to the parallel port connector
partially disengaged. The other was due a bad soldered wire in the same
cable. If the connector is not fully engaged, the radio goes into transmit.
If the parallel port connection is ok, try reseating the boards s
On 11/14/2014 5:55 PM, w...@reagan.com wrote:
The 1000 was running fine on 2.5.3. went to use the radio today
and once it goes thur its boot and you click the on button on
powersdr the radio goes into transmit and have to shut it down.
also reads hi swr even though a dummy load is connected. what
The 1000 was running fine on 2.5.3. went to use the radio today
and once it goes thur its boot and you click the on button on powersdr the
radio goes into transmit and have to shut it down. also reads hi swr even
though a dummy load is connected.
what I did, checked all connec
4 matches
Mail list logo
