]
[mailto:[EMAIL PROTECTED] On Behalf Of Jerry Flanders
Sent: Friday, May 02, 2008 12:15 PM
To: [EMAIL PROTECTED]; flexradio@flex-radio.biz
Subject: Re: [Flexradio] second Rx questions
Good news. Would it be possible, then, to monitor another band on the second
receiver on a different band when the
adio.biz
> Subject: RE: [Flexradio] second Rx questions
>
> A dumb question - sorry
>
> Will both receivers be able to share a single antenna - either a separate
> receive or xmit/receive one ?
>
> Thanks
> Dave - WA3FDB
>
> -Original Message-
> From:
: 'Jerry Flanders'; flexradio@flex-radio.biz
Subject: Re: [Flexradio] second Rx questions
Yep. :)
Eric
> -Original Message-
> From: Jerry Flanders [mailto:[EMAIL PROTECTED]
> Sent: Friday, May 02, 2008 12:15 PM
> To: [EMAIL PROTECTED]; flexradio@flex-radio.biz
&g
Yep. :)
Eric
> -Original Message-
> From: Jerry Flanders [mailto:[EMAIL PROTECTED]
> Sent: Friday, May 02, 2008 12:15 PM
> To: [EMAIL PROTECTED]; flexradio@flex-radio.biz
> Subject: RE: second Rx questions
>
> Good news. Would it be possible, then, to monitor another band on the
> seco
Good news. Would it be possible, then, to monitor another band on the
second receiver on a
different band when the 5000a is simultaneously transmitting?
(Using separate antennas with distance, filters, and stubs as usual
in a SO2R configuration, of course).
Jerry W4UK
At 12:50 PM 5/2/2008, Er
Currently it is not. This has a lot of implications and we could add a
switch to allow you to mute it to protect if needed.
Eric Wachsmann
FlexRadio Systems
> -Original Message-
> From: Jerry Flanders [mailto:[EMAIL PROTECTED]
> Sent: Friday, May 02, 2008 11:23 AM
> To: [EMAIL PROTECTED
Jerry,
I hope it is not, since I would like to mainly use it -besides all this
wonderful (future) possibilities with crosscorrelation analysis during
receive, mentioned in previous mails- during transmit as an analyser
watching the spectrum of the RF output. I haven't heard about that
capabilit
Is the second receiver muted while the main tx is transmitting?
Most conventional radios mute them, but I ask because most radios
don't have the capabilities of the 5000.
Jerry W4UK
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://m
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of Jim R
> Sent: Thursday, May 01, 2008 1:08 AM
> To: FlexRadioReflector
> Subject: [Flexradio] second Rx questions
>
> Will RX#1 and RX# 2 be able to ru
Flex Gurus
I have a few questions about Power SDR features when used with the second
receiver.
Will RX#1 and RX# 2 be able to run different sample rates simeltaneously?
Will other parameters, (filters, demodulation modes, display modes, AGC delay,
preamp, etc. be independently adjustable on
10 matches
Mail list logo
