"Ampere K. Hardraade" wrote:
> Thanks for helping me out on this problem. So far, I have tried:
I believe you want to dump the commercial ATI driver for the Radeon9200
i favour of the OpenSource alternative. I realize that I should
overhaul the chapter on ATI cards in "the manual"
A typical
Sure. Every little bit helps.
Ampere
On October 30, 2004 01:17 pm, Martin Spott wrote:
> I could 'lend' you my 'xorg.conf' that I use on a customers's PeeCee if
> you are ready to wait until tuesday,
___
Flightgear-devel mailing list
[EMAIL PROTECTED]
Martin Spott wrote:
> I could 'lend' you my 'xorg.conf' that I use on a customers's PeeCee if
> you are ready to wait until tuesday,
http://document.ihg.uni-duisburg.de/Misc/xorg.conf.r200
I states "SaX generated" but most of the stuff is the result of manual
editing :-)
Martin.
--
Unix _I
On Sat, 30 Oct 2004 01:51:52 -0400, Ampere wrote in message
<[EMAIL PROTECTED]>:
> Thanks for helping me out on this problem. So far, I have tried:
> - compiling agpgart as builtin and as a module
> - compiling with and without DRM
> - enabling and disabling the "useinternalagpart" in XF86Config
I have removed fglrx completely and use the driver from XFree86 instead. The
good news is that I have stopped getting errors in XFree86.0.log. The bad
news is that I still don't have direct rendering.
Ampere
On October 30, 2004 04:11 pm, Arnt Karlsen wrote:
> ..according to your lspci -v,
On Sat, 30 Oct 2004 19:39:42 -0400, Ampere wrote in message
<[EMAIL PROTECTED]>:
> On October 30, 2004 04:11 pm, Arnt Karlsen wrote:
> > ..according to your lspci -v, you have both an ATI card and an
> > Intel 82845G/GL[Brookdale-G] integrated card, and AFAICT, a
> > propeller head driver fro
On Sun, 31 Oct 2004 01:49:53 -0400, Ampere wrote in message
<[EMAIL PROTECTED]>:
> On October 30, 2004 10:32 pm, Arnt Karlsen wrote:
> > On Sat, 30 Oct 2004 19:39:42 -0400, Ampere wrote in message
> >
> > <[EMAIL PROTECTED]>:
> > > On October 30, 2004 04:11 pm, Arnt Karlsen wrote:
> > > > ..accord
When I type glxinfo | grep rendering, I got:
direct rendering: No
Ampere
On November 1, 2004 02:23 pm, Arnt Karlsen wrote:
> ..and your log mentions "Acceleration enabled". ;-)
>
> --
> ..med vennlig hilsen = with Kind Regards from Arnt... ;-)
> ...with a number of polar bear hunters in his ance
On Mon, 1 Nov 2004 19:53:15 -0500, Ampere wrote in message
<[EMAIL PROTECTED]>:
>
> On November 1, 2004 02:23 pm, Arnt Karlsen wrote:
> > ..and your log mentions "Acceleration enabled". ;-)
>
> When I type glxinfo | grep rendering, I got:
> direct rendering: No
..huh? 'glxgears ' says? I als