On Wed, 30 Mar 2011, Arnt Karlsen wrote:
> On Tue, 29 Mar 2011 14:26:31 -0700 (PDT), Gene wrote in message
> :
>
>> On Tue, 29 Mar 2011, Arnt Karlsen wrote:
>>
>>> ..how about spraying on your mirror layer onto clear sheets?
>>
>> You won't end up with an optically pure mirror, and trust me, it
>>
On Tue, 29 Mar 2011 14:26:31 -0700 (PDT), Gene wrote in message
:
> On Tue, 29 Mar 2011, Arnt Karlsen wrote:
>
> > ..how about spraying on your mirror layer onto clear sheets?
>
> You won't end up with an optically pure mirror, and trust me, it
> _must_ be optically pure.
..really? http://en.w
On Tue, 29 Mar 2011, Arnt Karlsen wrote:
> On Tue, 29 Mar 2011 12:53:38 -0700 (PDT), Gene wrote in message
> :
>
>> On Tue, 29 Mar 2011, Gene Buckle wrote:
>>
>>> Unless you've got ready access to a CNC router, I'd avoid the
>>> collimated display. It's one of those projects that make you
>>
On Tue, 29 Mar 2011, cas...@mminternet.com wrote:
> Hi Gene,
>
> I've been following your progress on the my cockpit forum and am going to
> try a somewhat different approach to produce a 13' diameter mirror.
>
> Idea is somewhat unorthodox so it may not work. OTOH if it does produce a
> reasonab
On Tue, 29 Mar 2011 12:53:38 -0700 (PDT), Gene wrote in message
:
> On Tue, 29 Mar 2011, Gene Buckle wrote:
>
> >>
> > Unless you've got ready access to a CNC router, I'd avoid the
> > collimated display. It's one of those projects that make you
> > scratch in "11" on the DIY Difficulty Knob.
>
Hi Gene,
I've been following your progress on the my cockpit forum and am going to
try a somewhat different approach to produce a 13' diameter mirror.
Idea is somewhat unorthodox so it may not work. OTOH if it does produce a
reasonable image it should be reproducible by the average hobbyist.
we
On Tue, 29 Mar 2011, Gene Buckle wrote:
>>
> Unless you've got ready access to a CNC router, I'd avoid the collimated
> display. It's one of those projects that make you scratch in "11" on the
> DIY Difficulty Knob.
>
I should add that if you DO decide to build one, you're restricted to an
8' di
On Tue, 29 Mar 2011, cas...@mminternet.com wrote:
>
>
> He, he, yea..
>
> was in a rush to shoot the video for a talk at UCD after one of the
> projectors exhibited a problem inverting the image, so had to "re-invert"
> all the projectors, recompute the mesh(s), realign, and shoot. After
> sendi
He, he, yea..
was in a rush to shoot the video for a talk at UCD after one of the
projectors exhibited a problem inverting the image, so had to "re-invert"
all the projectors, recompute the mesh(s), realign, and shoot. After
sending the bad boy back for repairs, discovered the problem -- the f
On Tue, 29 Mar 2011, cas...@mminternet.com wrote:
> Hi,
>
> posted a short videos from the work on panoramic display and image warping
> stuff
>
> go to http://www.flickr.com/photos/61165268@N06/ for a look see.
>
> at some point I'll find some time to figure out how git works and post the
> sourc
10 matches
Mail list logo
