older text frame on a master
page, you've made it easier to find the information and made it much more
impervious to accidental deletion or overwriting.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com
27;re using Unicode font encoding, you can try code point 2122 (0x99), which
is what works for Times New Roman.
-Fred Ridder
> Date: Mon, 11 May 2009 17:09:34 +0200
> Subject: Re: Superscript character tag questions--Take 2
> From: yves.barbion at gmail.com
> To: maker at verizon.net
*never* need to use subscript, you can specify a negative offset value for the
subscript definition to turn it into a second superscript with different
percentages.
-Fred Ridder
> Date: Mon, 11 May 2009 09:49:29 -0500
> From: maker at verizon.net
> To: framers at lists.frameusers.com
&
you're using Unicode font encoding, you can try code point 2122 (0x99), which
is what works for Times New Roman.
-Fred Ridder
> Date: Mon, 11 May 2009 17:09:34 +0200
> Subject: Re: Superscript character tag questions--Take 2
> From: yves.barb...@gmail.com
> To: ma...@verizon.
*never* need to use subscript, you can specify a negative offset value for the
subscript definition to turn it into a second superscript with different
percentages.
-Fred Ridder
> Date: Mon, 11 May 2009 09:49:29 -0500
> From: ma...@verizon.net
> To: framers@lists.frameusers.com
&
cells, and all notes will appear on each page if the table breaks across pages.
-Fred Ridder
> Subject: Table Footnotes
> Date: Wed, 6 May 2009 13:17:48 -0500
> From: CMartinek at zebra.com
> To: framers at lists.frameusers.com
>
> I haven't used table footnotes in ages
cells, and all notes will appear on each page if the table breaks across pages.
-Fred Ridder
> Subject: Table Footnotes
> Date: Wed, 6 May 2009 13:17:48 -0500
> From: cmarti...@zebra.com
> To: framers@lists.frameusers.com
>
> I haven't used table footnotes in ages, but I ha
nevitably produced
by the format's area-based image compression algorithm. JPEG is particularly
ill-suited for line art or images containing text because it produces artifacts
(a kind of gray smudginess) surrounding letters in text or alongside lines in a
drawing.
-Fred Ridder
nevitably produced
by the format's area-based image compression algorithm. JPEG is particularly
ill-suited for line art or images containing text because it produces artifacts
(a kind of gray smudginess) surrounding letters in text or alongside lin
bers that were correct the last time that specific book was
updated, but the cross-file, book-level update has to be invoked from the book
file so that it will update the chapter files that are specific to that book.
-Fred Ridder
y the numbers that were correct the last time that specific book was
updated, but the cross-file, book-level update has to be invoked from the book
file so that it will update the chapter files that are specific to that book.
-Fred Ridder
___
You a
rid of the bad font specicfication was a "wash
via MIF" operation:
-Save the FM file in MIF format
-Close the original
-Open the MIF version of the file
-Do a Save As to overwrite the original FM file
Give that a try if the "don't remember" approach doesn't do the job for you.
-Fred Ridder
rid of the bad font specicfication was a "wash
via MIF" operation:
-Save the FM file in MIF format
-Close the original
-Open the MIF version of the file
-Do a Save As to overwrite the original FM file
Give that a try if the "don't
, each
and every time the buffer is about to be cleared.
But if you go to File>Preferences>General, you'll find options that allow you
to reduce the frequency of the warnings to the first time per session or to
turn them off altogether.
-Fred Ridder
, each
and every time the buffer is about to be cleared.
But if you go to File>Preferences>General, you'll find options that allow you
to reduce the frequency of the warnings to the first time per session or to
turn them off altogether.
-Fred Ridder
__
lf, which is
a potential maintenance nightmare. But since *some* of the numbering needs to
interact, it's likely that any ad hoc attempt to define some series labels will
cause more problems than it fixes. In my experience, the *only* way to resolve
the kind of situation Eva is facing is to get someone competent to redesign the
template with a rational numbering scheme.
Just my $.02...
-Fred Ridder
lf, which is
a potential maintenance nightmare. But since *some* of the numbering needs to
interact, it's likely that any ad hoc attempt to define some series labels will
cause more problems than it fixes. In my experience, the *only* way to resolve
the kind of situation Eva is facing is to
After setting the Preferences item, you also have to close and re-open
FrameMaker for the change to take effect.
-Fred Ridder
> Date: Tue, 14 Apr 2009 13:55:01 -0700
> From: generic668 at yahoo.ca
> Subject: Re: FM9: Moving from unstructured to structured view
> To
After setting the Preferences item, you also have to close and re-open
FrameMaker for the change to take effect.
-Fred Ridder
> Date: Tue, 14 Apr 2009 13:55:01 -0700
> From: generic...@yahoo.ca
> Subject: Re: FM9: Moving from unstructured to structured view
> To: framers@lists.fr
it is true that you probably would need to define *two* variables that
include the indefinite article because you'll most lkely need both capped and
lower-case variants.
-Fred Ridder
> Date: Fri, 10 Apr 2009 15:29:28 +
> From: jingtorralba at comcast.net
> To: peter at knowhowpr
it is true that you probably would need to define *two* variables that
include the indefinite article because you'll most lkely need both capped and
lower-case variants.
-Fred Ridder
> Date: Fri, 10 Apr 2009 15:29:28 +
> From: jingtorra...@comcast.net
> To: pe...@knowhowpr
The advantage of this is that you would only have to worry about
> setting up the proper conditional text show/hide rules at publishing time,
> but the downside is that you must take some steps to ensure that the
> conditionalized pair of variable
ensure that the conditionalized pair of
variables always get inserted together and that neither of them ever gets
deleted independent of the other.
-Fred Ridder
The advantage of this is that you would only have to worry about
> setting up the proper conditional text show/hide rules at publishing time,
> but the downside is that you must take some steps to ensure that the
> conditionalized pair of variable
ensure that the conditionalized pair of
variables always get inserted together and that neither of them ever gets
deleted independent of the other.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-arc
PDF Setup dialog for both books. FrameMaker has no way of
knowing what paragraphs in a given book might be referred to from an external
book, so without selecting this option Frame might eliminate some named
destinations that are needed for intr-book links.
-Fred Ridder
PDF Setup dialog for both books. FrameMaker has no way of
knowing what paragraphs in a given book might be referred to from an external
book, so without selecting this option Frame might eliminate some named
destinations that are needed for intr-book links.
-Fred Ridder
___
Font switch in a variable definition uses a forward slash rather
than a backslash.
-Fred Ridder
?
Font switch in a variable definition uses a forward slash rather
than a backslash.
-Fred Ridder
¶
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.frameusers.com.
To unsubscribe send
he same options.
Sorry to say, that's not necessarily so. As Dov has pointed out a number of
times, InDesign generates PDF internally, from its own PDF generation code,
while FrameMaker uses the Adobe PDF printer driver and the Distiller.
-Fred Ridder
r the same options.
Sorry to say, that's not necessarily so. As Dov has pointed out a number of
times, InDesign generates PDF internally, from its own PDF generation code,
while FrameMaker uses the Adobe PDF printer driver and the Distiller.
-Fred Ridder
___
to highlight that
file in the book window and then choose Edit>Set Up Table of Contents to revise
the list of paragraphs to include. Once you've selected the para tags for your
detailed outline and verified the correct suffix string, proceed to update the
book and you're done.
-Fred
to highlight that
file in the book window and then choose Edit>Set Up Table of Contents to revise
the list of paragraphs to include. Once you've selected the para tags for your
detailed outline and verified the correct suffix string, proceed to update the
book and you're done.
in FrameMaker's escape-key shortcut codes.
-Fred Ridder
in FrameMaker's escape-key shortcut codes.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.frameusers.com.
To unsubscribe send a blank email to
framers-
e book level. This means
that the ...TOC, ...LOT, ...LOT, and ...IX paragraph tags are excluded from the
get-go. But within any of the generated files, those tags are completely valid
and can be selected for inclusion in bookmarks.
-Fred Ridder
Yes on both counts. But "fantastic" does not necessarily mean "useful".
> From: pxenson at comcast.net
> Subject: Re: FrameMaker 9
> Date: Wed, 25 Mar 2009 12:43:28 -0700
> To: framers at lists.frameusers.com
>
> Bugginess? Fantastic new features?
>
> Pat
> On Mar 25, 2009, at 12:33 PM, John
e book level. This means
that the ...TOC, ...LOT, ...LOT, and ...IX paragraph tags are excluded from the
get-go. But within any of the generated files, those tags are completely valid
and can be selected for inclusion in bookmarks.
-Fred Ridder
___
Yes on both counts. But "fantastic" does not necessarily mean "useful".
> From: pxen...@comcast.net
> Subject: Re: FrameMaker 9
> Date: Wed, 25 Mar 2009 12:43:28 -0700
> To: framers@lists.frameusers.com
>
> Bugginess? Fantastic new features?
>
> Pat
> On Mar 25, 2009, at 12:33 PM, John Pos
art of the flow.
-Fred Ridder
> Date: Mon, 23 Mar 2009 13:01:20 -0500
> From: maker at verizon.net
> To: framers at lists.frameusers.com
> Subject: How to get to top of file
>
> Hi, all. I am using Frame 7.1 on Windows XP SP3.
>
> If I grab the scroller-box-thing in the
art of the flow.
-Fred Ridder
> Date: Mon, 23 Mar 2009 13:01:20 -0500
> From: ma...@verizon.net
> To: framers@lists.frameusers.com
> Subject: How to get to top of file
>
> Hi, all. I am using Frame 7.1 on Windows XP SP3.
>
> If I grab the scroller-box-thing in the scrol
r for a
fix.) Full details and links to download pages are at
http://www.adobe.com/support/security/bulletins/apsb09-04.html
-Fred Ridder
r for a
fix.) Full details and links to download pages are at
http://www.adobe.com/support/security/bulletins/apsb09-04.html
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.fr
breaks between small files is to
combine their content into a single composite file.
-Fred Ridder
breaks between small files is to
combine their content into a single composite file.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.frameusers.com.
To unsubscribe send a
The way I've always done this is to use cross-references to the footnote item
for the additional reference points. Just create an x-ref format that specifies
the <$paranumonly> building block with a superscripted character format applied
to it.
-Fred Ridder
> Date: Wed, 18
The way I've always done this is to use cross-references to the footnote item
for the additional reference points. Just create an x-ref format that specifies
the <$paranumonly> building block with a superscripted character format applied
to it.
-Fred Ridder
> Date: Wed, 18
lling you.
And perhaps Adobe has also over-compensated a bit because it does represent
changed behavior from earlier versions.
But in any event, you can turn down the frequency of the warnigns or turn them
off entirely via the "Show warnings while clearing history" item in in the
File>Preferences>General dialog.
-Fred Ridder
ncremented (the + in the 2nd position within the brackets) and
displayed as an Arabic number (according to the n in the first position within
the brackets). A space inside the brackets for the first and second number
counters specifies that the value of the corresponding counter is not
displayed, but rather is passed through without change to the next incidence of
the "M" series.
-Fred Ridder
emented (the + in the 2nd position within the brackets) and
displayed as an Arabic number (according to the n in the first position within
the brackets). A space inside the brackets for the first and second number
counters specifies that the value of the corresponding counter is not
d
lling you.
And perhaps Adobe has also over-compensated a bit because it does represent
changed behavior from earlier versions.
But in any event, you can turn down the frequency of the warnigns or turn them
off entirely via the "Show warnings while clearing history" item in i
t
should work as another route to the same goal (maybe you need a *third*
different page numbering scheme, too???).
-Fred Ridder
t
should work as another route to the same goal (maybe you need a *third*
different page numbering scheme, too???).
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.fra
ill only contain
the substitution font and will not match a PDF of the book that is created on
the properly configured system.
-Fred Ridder
will only contain the substitution font and will not match a PDF of the book
that is created on the properly configured system.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram.
nt inside it to
be able to edit anything; all you can do is double-click it to launch the
linked external app.
-Fred Ridder
it to
be able to edit anything; all you can do is double-click it to launch the
linked external app.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.frameusers.com.
To u
Mif2go does this very conveniently. The free demo version provides this
capability as well as adding a really convenient "Wash via MIF" command to the
File menu.
-Fred Ridder
> Subject: Book to .mif plugin
> Date: Thu, 26 Feb 2009 15:17:44 +0100
> From: verner.andersen at
Mif2go does this very conveniently. The free demo version provides this
capability as well as adding a really convenient "Wash via MIF" command to the
File menu.
-Fred Ridder
> Subject: Book to .mif plugin
> Date: Thu, 26 Feb 2009 15:17:44 +0100
> From: verner.ander...
mess with Symbol font to get a lower-case mu. Most standard Windows fonts have
a lower-case mu (?) at code point 0181.
-Fred Ridder
mess with Symbol font to get a lower-case mu. Most standard Windows fonts have
a lower-case mu (µ) at code point 0181.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...
60 independent numbering series, which should be enough for most uses.
-Fred Ridder
60 independent numbering series, which should be enough for most uses.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.frameusers.com.
To unsubscribe send a blank em
eable, BTW), the upper-right button "pivots"
the toolbar back to horizontal mode and redocks it below the
menu bar.
Intuitive and user-friendly, right?
-Fred Ridder
eable, BTW), the upper-right button "pivots"
the toolbar back to horizontal mode and redocks it below the
menu bar.
Intuitive and user-friendly, right?
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-ar
So while this approach may be a quick and dirty alternative to using
a script or a plug-in to do the tag renaming/replacement, you may
ultimately find it to be a little too far on the dirty side and not as
quick as it first seems.
-Fred Ridder
So while this approach may be a quick and dirty alternative to using
a script or a plug-in to do the tag renaming/replacement, you may
ultimately find it to be a little too far on the dirty side and not as
quick as it first seems.
-Fred Ridder
__
you to specify "keep with next row" and/or "keep with
previous row" to specify pairs or sets of rows that must not be broken
across pages.
-Fred Ridder
he caption paragraph as close as possible to the
following text paragraph regardless of the presence of the table.
In other words, the "next" that the caption is trying to stay with
is *NOT* the table object; the table is actually part of the caption
paragraph because its anchor is before the pilcrow.
-Fred Ridder
you to specify "keep with next row" and/or "keep with
previous row" to specify pairs or sets of rows that must not be broken
across pages.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
ep the caption paragraph as close as possible to the
following text paragraph regardless of the presence of the table.
In other words, the "next" that the caption is trying to stay with
is *NOT* the table object; the table is actually part of the caption
paragraph because its anchor is b
in FrameMaker is 120. In both cases the pixel dimensions of the
capture are the same and the actual resolution is still the same nominal
96 dpi; the "resolution" in the file header is nothing more than a
"suggested" value for anything using the image downstream, and
FrameMaker displays that suggestion as the custom dpi value.
-Fred Ridder
in FrameMaker is 120. In both cases the pixel dimensions of the
capture are the same and the actual resolution is still the same nominal
96 dpi; the "resolution" in the file header is nothing more than a
"suggested" value for anything using the image
ook files on
your network. All I'll say is that if you are able to manually
open each component with no warning messages (e.g. missing
fonts or unresolved cross-references), it does suggest that
the issue is with your network or your interface to that network.
-Fred Ridder
k with book files on
your network. All I'll say is that if you are able to manually
open each component with no warning messages (e.g. missing
fonts or unresolved cross-references), it does suggest that
the issue is with your network or your interfac
e file.
Changes in tagging or formatting are not tracked.
-Fred Ridder
minutes to manually open each file. And there
are several approaches you could take to scripting this if manual opening
is too tedious for you.
-Fred Ridder
e file.
Changes in tagging or formatting are not tracked.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.frameusers.com.
To unsubscribe send a blank email to
framers-uns
fee minutes to manually open each file. And there
are several approaches you could take to scripting this if manual opening
is too tedious for you.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messa
nel's Add or Remove Programs listing, and I
was able to successfully roll back (or at least it *seemed* to
be completely successful...) from 277 to 273 by removing
the "Adobe FrameMaker 8 p277 Patcher" item.
-Fred Ridder
tion of SnagIt, but I would point out that the
correct URL is www.techsmith.com. They have a free 30-day demo which
is well worth the price. ;^)
-Fred Ridder
Panel's Add or Remove Programs listing, and I
was able to successfully roll back (or at least it *seemed* to
be completely successful...) from 277 to 273 by removing
the "Adobe FrameMaker 8 p277 Patcher" item.
-Fred Ridder
___
You
ommendation of SnagIt, but I would point out that the
correct URL is www.techsmith.com. They have a free 30-day demo which
is well worth the price. ;^)
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list me
rom
the context menu. On the Page tab set the numbering to lower-case roman.
After setting the numbering properties, remember to do an Update Book for
the changes to actually get applied.
-Fred Ridder
ng from
the context menu. On the Page tab set the numbering to lower-case roman.
After setting the numbering properties, remember to do an Update Book for
the changes to actually get applied.
-Fred Ridder
___
You are currently subscribed to Fr
rver
is that each reviewer's markup gets merged into the master review file
so that all reviewers see all previous markup/comments.
-Fred Ridder
ounding context, to be very useable in
many cases. Just *my* $0.02...
-Fred Ridder
le server
is that each reviewer's markup gets merged into the master review file
so that all reviewers see all previous markup/comments.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send
ounding context, to be very useable in
many cases. Just *my* $0.02...
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.frameusers.com.
To unsubscribe send a blank emai
the already existing Track Text Edits feature.
-Fred Ridder
ality of the already existing Track Text Edits feature.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.frameusers.com.
To unsubscribe send a blank email to
framers-unsubscr...@
uestion is
whether that version of Acrobat will be available as a standalone
product, as well as whether it hooks into the standalone version of
FrameMaker 9.0.
-Fred Ridder
sion of Vista.
-Fred Ridder
uestion is
whether that version of Acrobat will be available as a standalone
product, as well as whether it hooks into the standalone version of
FrameMaker 9.0.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archi
sion of Vista.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.frameusers.com.
To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.f
ther than the presence of a specific
text string.
-Fred Ridder
ther than the presence of a specific
text string.
-Fred Ridder
___
You are currently subscribed to Framers as arch...@mail-archive.com.
Send list messages to fram...@lists.frameusers.com.
To unsubscribe send a blank email to
fra
ou copy the format from a chunk of
body text (for example, 11 pt TNR bold with the Bold character
tag applied) and then paste onto a selection in a heading (say
14 pt Helvetica non-bold), you will get a chunk of 11 pt TNR
in the middle of that heading.
-Fred Ridder
True enough. I forgot about that because my preferred method for
inserting page breaks is the dedicated para tag with a large "space
below pgf" setting. That approach makes it easy to search for and
selectively remove the breaks or to remove them globally.
-Fred Ridder
you copy the format from a chunk of
body text (for example, 11 pt TNR bold with the Bold character
tag applied) and then paste onto a selection in a heading (say
14 pt Helvetica non-bold), you will get a chunk of 11 pt TNR
in the middle of that heading.
-Fred Ridder
801 - 900 of 1367 matches
Mail list logo