From $SRCDIR/UPDATING
To cross-install current onto a separate partition
--
# In this approach we use a separate partition to hold
# current's root, 'usr', and 'var' directories. A partition
# holding /, /usr and
Hi,
i am little bit weak in networking concept, i have two network interfaces
usb0 and eth0, eth0 is connected to a static ip, which works perfectly
fine, now i want that usb0 should be able to access static ip which is
connected to eth0,
can anyone guide me proper solutionwith command for this
I've ran into compiling problems with some ports. World and kernel have not
yet been rebuilt. 10.x is a pre-APLHA release.
Before I attempt to rebuild any of the system, has anyone else had any
problems related to building i386 on AMD64?
___
08.10.2013 11:45, Joe Nosay пишет:
I've ran into compiling problems with some ports. World and kernel have not
yet been rebuilt. 10.x is a pre-APLHA release.
Please, show diagnostic messages (of failing ports).
Before I attempt to rebuild any of the system, has anyone else had any
problems
On 07.10.2013 21:04, Sean Bruno wrote:
Proposed patch to eliminate this check. If I understand the macro
correctly, there's no way for these checks to ever do anything as bit
shifting an unsigned will simply clear out the value. So, the check for
0 is completely bogus?
Hello!
I think
08.10.2013 11:55, Boris Samorodov пишет:
08.10.2013 11:45, Joe Nosay пишет:
I've ran into compiling problems with some ports. World and kernel have not
yet been rebuilt. 10.x is a pre-APLHA release.
Please, show diagnostic messages (of failing ports).
OK, I've seen you have posted them to
On Oct 7, 2013, at 10:48 PM, Allan Jude wrote:
On 2013-10-08 01:11, Teske, Devin wrote:
On Oct 7, 2013, at 10:07 PM, Allan Jude wrote:
On 2013-10-07 15:59, Allan Jude wrote:
Devin Teske and I have been working on a big patch to bsdinstall to
implement installing on a ZFS pool. It supports
Yasir hussan kolyasir at gmail.com writes:
Hi,
i am little bit weak in networking concept, i have two network interfaces
usb0 and eth0, eth0 is connected to a static ip, which works perfectly
fine, now i want that usb0 should be able to access static ip which is
connected to eth0,
test
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
On 10/7/13 9:49 PM, Julian Elischer wrote:
On 10/8/13 11:19 AM, Lyndon Nerenberg wrote:
On 2013-10-07, at 8:15 PM, Steve Kargl
s...@troutmask.apl.washington.edu wrote:
Maybe there was no development for 15 years. However, the 7364
lines in ChangeLog after 2010-02-04 suggests that there may
I finish install a virtual box from ports and it's build ok, look
=== Installing ldconfig configuration file
=== Registering installation for virtualbox-ose-4.2.18_1
Installing virtualbox-ose-4.2.18_1... done
=== SECURITY REPORT:
This port has installed the following binaries which
On Tue, Oct 08, 2013 at 06:29:53AM +, Thomas Mueller wrote:
From $SRCDIR/UPDATING
To cross-install current onto a separate partition
--
# In this approach we use a separate partition to hold
# current's root,
I think the fact is that most direct users of RCS use it in a very
simple way, and
it works just fine for that. with no real need for any updates or any
change.
With all due respect Julian, The more we discuss this more this really
points to the problem that FreeBSD appears to be a
Problem with Citrix Xen 6.2 and install from ISO. The solution was remove
cd-rom drive from virtual machine. Not possible now with xen default in GENERIC
kernel.
Message error:
run_interrupt_driven_hooks - still waiting after 300 seconds for
xenbusb_nop_confighook_cb
panic:
On 10/8/13 8:04 AM, sth...@nethelp.no wrote:
I think the fact is that most direct users of RCS use it in a very
simple way, and
it works just fine for that. with no real need for any updates or any
change.
With all due respect Julian, The more we discuss this more this really
points to the
On Tue, Oct 8, 2013 at 5:20 PM, Alfred Perlstein bri...@mu.org wrote:
On 10/8/13 8:04 AM, sth...@nethelp.no wrote:
I think the fact is that most direct users of RCS use it in a very
simple way, and
it works just fine for that. with no real need for any updates or any
change.
With all due
On 10/8/13 8:26 AM, Andreas Nilsson wrote:
On Tue, Oct 8, 2013 at 5:20 PM, Alfred Perlstein bri...@mu.org
mailto:bri...@mu.org wrote:
On 10/8/13 8:04 AM, sth...@nethelp.no mailto:sth...@nethelp.no
wrote:
I think the fact is that most direct users of RCS use
On Tue, Oct 8, 2013, at 10:33, Alfred Perlstein wrote:
Oh I have done that in the past, but why the editing, the makefiles, the
etc, etc, etc. Why isn't there a customize.freebsd.org where I just hit
a few checkboxes, save and then hit download?
A metaport builder web service would be
On 10/8/13, Julian Elischer wrote:
On 10/7/13 11:06 PM, Steve Kargl wrote:
On Sun, Oct 06, 2013 at 10:43:21PM -0400, Eitan Adler wrote:
Hey all,
RCS was removed from the base system in r256095. If you still want to
use RCS please install either devel/rcs or devel/rcs57. If not, be
sure to
On 10/08/13 16:36, Kurt Lidl wrote:
On 10/8/13, Julian Elischer wrote:
On 10/7/13 11:06 PM, Steve Kargl wrote:
On Sun, Oct 06, 2013 at 10:43:21PM -0400, Eitan Adler wrote:
Hey all,
RCS was removed from the base system in r256095. If you still want to
use RCS please install either
On Tue, Oct 8, 2013 at 4:09 PM, Alfred Perlstein bri...@mu.org wrote:
On 10/7/13 9:49 PM, Julian Elischer wrote:
On 10/8/13 11:19 AM, Lyndon Nerenberg wrote:
On 2013-10-07, at 8:15 PM, Steve Kargl s...@troutmask.apl.washington.edu
wrote:
Maybe there was no development for 15 years.
On Tue, Oct 8, 2013, at 9:45, Josias L.G wrote:
Problem with Citrix Xen 6.2 and install from ISO. The solution was
remove cd-rom drive from virtual machine. Not possible now with xen
default in GENERIC kernel.
Message error:
run_interrupt_driven_hooks - still waiting after 300 seconds for
On Oct 7, 2013 7:31 PM, Lyndon Nerenberg lyn...@orthanc.ca wrote:
Okay folks, can we make a call about keeping the RCS tools in the base?
The proponents wanting to remove RCS need to speak up and make their
technical case.
Perhaps slightly off-topic, but how about we move into the 21st
On 8 October 2013 16:04, sth...@nethelp.no wrote:
- For some of us, the attraction of FreeBSD is that it is a tightly
integrated system, and the base contains enough useful functionality
that we don't *have* to add a lot of packages.
- Each package that is moved out of the base system means
On 8 October 2013 16:04, sth...@nethelp.no wrote:
- For some of us, the attraction of FreeBSD is that it is a tightly
integrated system, and the base contains enough useful functionality
that we don't *have* to add a lot of packages.
- Each package that is moved out of the base system means
On 10/8/13 8:59 AM, Jonathan Anderson wrote:
On 8 October 2013 16:04, sth...@nethelp.no wrote:
- For some of us, the attraction of FreeBSD is that it is a tightly
integrated system, and the base contains enough useful functionality
that we don't *have* to add a lot of packages.
- Each
[ My sympathies lean toward those who want to retain RCS,
but as I dont personaly use it, that's all on that. ] ...
screen, zsh, vim-lite, git why is that so manual for me? Why can't I
just register a package set somewhere so that all I have to type in is
alfred.perlstein.devel into a box
Hi all.
r256148 buildworld gives this error:
=== secure/usr.bin/ssh (all)
cc -O2 -pipe -march=athlon64-sse3 -mtune=athlon64-sse3
-I/usr/src/secure/usr.bin/ssh/../../../crypto/openssh -include
ssh_namespace.h -DHAVE_LDNS=1 -include krb5_config.h -std=gnu99
-Qunused-arguments
For information: It's possible to reproduce this problem using the
indication given in kern/121385 (5 years old PR).
Regards,
Olivier
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe,
Hi Alfred cc current.
Alfred Perlstein wrote:
On 10/6/13 8:21 AM, Julian H. Stacey wrote:
I wrote Thu, 03 Oct 2013 23:28:43 +0200
Rui Paulo wrote:
On 2 Oct 2013, at 16:57, Julian H. Stacey j...@berklix.com wrote:
Hi current@,
It seems I need if_urtwn driver for a really miniature
On Tue, Oct 8, 2013 at 7:09 AM, Alfred Perlstein bri...@mu.org wrote:
On 10/7/13 9:49 PM, Julian Elischer wrote:
On 10/8/13 11:19 AM, Lyndon Nerenberg wrote:
On 2013-10-07, at 8:15 PM, Steve Kargl s...@troutmask.apl.washington.**
edu s...@troutmask.apl.washington.edu wrote:
Maybe there
On Tue, Oct 8, 2013 at 9:09 AM, Alfred Perlstein bri...@mu.org wrote:
You're right on the money, to be honest this is one of the reasons why
I've switched to using OSX as my desktop OS.
zsh, vim, screen by default. and upgrades work. At the end of the day
I'm spending time doing work, not
I too am seeing
urtwn0: timeout waiting for checksum report
urtwn0: at uhub3, port 3, addr 4 (disconnected)
(BTW there's no external hub, uhub3 must be inside laptop,
there's no loose connection, laptop was not touched, all work was remote)
PS a typical sample comparison of
Hi,
Note the noise floor differences.. wonder why that is.
Rui ported the uwrtn stuff, right? He may be able to help. The driver is
recent and its likely there are bugs to shake out.
-adrian
On Oct 8, 2013 2:49 PM, Julian H. Stacey j...@berklix.com wrote:
I too am seeing
urtwn0:
I think that's great. But, as we are increasingly finding, theres no stable
ports snapshot, so unless we as a project change how packages are managed,
there may not really be a stable, predictable version of things once
they're moved from base to a package. A number of users and companies like
Em Tue, 08 Oct 2013 09:43:19 -0700, Eric L. Camachat escreveu
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 10/08/2013 07:17, Nilton Jose Rizzo wrote:
root@valfenda:/usr/ports/emulators/virtualbox-ose # kldload vboxdrv
root@valfenda:/usr/ports/emulators/virtualbox-ose #
but
On 10/07/13 21:59, Allan Jude wrote:
Devin Teske and I have been working on a big patch to bsdinstall to
implement installing on a ZFS pool. It supports both GPT and MBR, the 4k
sector gnop trick, and optional GELI encryption. We would like to commit
this in time for 10.0-BETA1 so it needs
oops, sent from my non-subscribed email..
On 10/8/13 11:17 AM, Freddie Cash wrote:
On Tue, Oct 8, 2013 at 7:09 AM, Alfred Perlstein bri...@mu.org
mailto:bri...@mu.orgwrote:
On 10/7/13 9:49 PM, Julian Elischer wrote:
On 10/8/13 11:19 AM, Lyndon Nerenberg wrote:
On
In message 52538562.6030...@freebsd.org, Julian Elischer writes:
On 10/8/13 10:03 AM, Steve Rikli wrote:
On Mon, Oct 07, 2013 at 06:32:21PM -0700, Alfred Perlstein wrote:
On 10/7/13 6:30 PM, Steve Kargl wrote:
...
PS: As noted, the code is GPL. There has been an effort
to remove GPL
On 10/8/13 10:41 AM, Julian H. Stacey wrote:
Hi Alfred cc current.
Alfred Perlstein wrote:
On 10/6/13 8:21 AM, Julian H. Stacey wrote:
I wrote Thu, 03 Oct 2013 23:28:43 +0200
Rui Paulo wrote:
On 2 Oct 2013, at 16:57, Julian H. Stacey j...@berklix.com wrote:
Hi current@,
It seems I need
In message 52538d19.8000...@freebsd.org, Julian Elischer writes:
On 10/8/13 12:34 PM, Mehmet Erol Sanliturk wrote:
On Mon, Oct 7, 2013 at 9:49 PM, Julian Elischer jul...@freebsd.org
mailto:jul...@freebsd.org wrote:
On 10/8/13 9:33 AM, Steve Kargl wrote:
On Mon, Oct
On Tue, Oct 8, 2013 at 1:17 PM, Nathan Whitehorn nwhiteh...@freebsd.orgwrote:
4. What is this gnop stuff for?
Can't comment on the rest, but gnop is required to create 4K-aligned vdevs
where the minimum block size is 4K (aka ashift=12). Without this, ZFS
relies on the underlying disk driver
In message 525422b6.9040...@mu.org, Alfred Perlstein writes:
On 10/8/13 8:04 AM, sth...@nethelp.no wrote:
I think the fact is that most direct users of RCS use it in a very
simple way, and
it works just fine for that. with no real need for any updates or any
change.
With all due
In message 52542687.7000...@pix.net, Kurt Lidl writes:
On 10/8/13, Julian Elischer wrote:
On 10/7/13 11:06 PM, Steve Kargl wrote:
On Sun, Oct 06, 2013 at 10:43:21PM -0400, Eitan Adler wrote:
Hey all,
RCS was removed from the base system in r256095. If you still want to
use RCS please
In message CAETOPp0imH3LCM2gwe1a_TJD+q5YoWhuJbR0YhHpux0qe8irtA@mail.gmail.c
om
, Jos Backus writes:
On Oct 7, 2013 7:31 PM, Lyndon Nerenberg lyn...@orthanc.ca wrote:
Okay folks, can we make a call about keeping the RCS tools in the base?
The proponents wanting to remove RCS need to speak
On 10/8/13 11:17 AM, Freddie Cash wrote:
On Tue, Oct 8, 2013 at 7:09 AM, Alfred Perlstein bri...@mu.org
mailto:bri...@mu.orgwrote:
On 10/7/13 9:49 PM, Julian Elischer wrote:
On 10/8/13 11:19 AM, Lyndon Nerenberg wrote:
On 2013-10-07, at 8:15 PM, Steve Kargl
On Tue, 8 Oct 2013, Adrian Chadd wrote:
I think that's great. But, as we are increasingly finding, theres no stable
ports snapshot, so unless we as a project change how packages are managed,
there may not really be a stable, predictable version of things once
they're moved from base to a
On 10/08/13 22:25, Freddie Cash wrote:
On Tue, Oct 8, 2013 at 1:17 PM, Nathan Whitehorn
nwhiteh...@freebsd.org mailto:nwhiteh...@freebsd.orgwrote:
4. What is this gnop stuff for?
Can't comment on the rest, but gnop is required to create 4K-aligned
vdevs where the minimum block size is
Am 08.10.2013 um 22:29 schrieb Cy Schubert cy.schub...@komquats.com:
A Red Hat-like kickstart or Solaris jumpstart possibly?
http://blog.hostileadmin.com/2013/04/11/installing-freebsd-via-cobbler/
I wish it was using bsdinstall, though.
I've iterated my views on these things a few times.
I honestly am not all _that_ interested in trying to build a polished OS.
I'd rather participate in building an OS toolkit that let's PCBSD, pfsense,
that storage appliance I keep forgetting the name of (heh), etc all build
OSes on top of it.
On Oct 8, 2013, at 1:17 PM, Nathan Whitehorn wrote:
On 10/07/13 21:59, Allan Jude wrote:
Devin Teske and I have been working on a big patch to bsdinstall to
implement installing on a ZFS pool. It supports both GPT and MBR, the 4k
sector gnop trick, and optional GELI encryption. We would like
On Tue, 8 Oct 2013, Cy Schubert wrote:
I've started work on a port (not that this was my highest priority but
received a private email that I may want to do this instead of rcs57).
Would the majority here rather have it in base? Just finished schlepping
the OpenBSD source to my laptop (the link
On Oct 8, 2013 1:37 PM, Cy Schubert cy.schub...@komquats.com wrote:
In message
CAETOPp0imH3LCM2gwe1a_TJD+q5YoWhuJbR0YhHpux0qe8irtA@mail.gmail.c
om
, Jos Backus writes:
On Oct 7, 2013 7:31 PM, Lyndon Nerenberg lyn...@orthanc.ca wrote:
Okay folks, can we make a call about keeping the RCS
On 10/08/13 22:50, Teske, Devin wrote:
On Oct 8, 2013, at 1:17 PM, Nathan Whitehorn wrote:
On 10/07/13 21:59, Allan Jude wrote:
Devin Teske and I have been working on a big patch to bsdinstall to
implement installing on a ZFS pool. It supports both GPT and MBR, the 4k
sector gnop trick, and
On 10/8/13 4:33 PM, Cy Schubert wrote:
In message 52542687.7000...@pix.net, Kurt Lidl writes:
On 10/8/13, Julian Elischer wrote:
On 10/7/13 11:06 PM, Steve Kargl wrote:
On Sun, Oct 06, 2013 at 10:43:21PM -0400, Eitan Adler wrote:
Hey all,
RCS was removed from the base system in r256095. If
5. I think some substantial part of the MBR code will blow up if you are
reinitalizing a previously formatted disk (the bsdlabel will be retasted
and come back from the dead).
Will not some combination of gpart destroy -F and (insert suggestion) work?
Yes, that will work just fine.
On 10/8/2013, Nathan Whitehorn wrote:
On 10/07/13 21:59, Allan Jude wrote:
Devin Teske and I have been working on a big patch to bsdinstall to
implement installing on a ZFS pool. It supports both GPT and MBR, the 4k
sector gnop trick, and optional GELI encryption. We would like to commit
this
Devin Teske wrote this message on Tue, Oct 08, 2013 at 20:50 +:
2. Why are you using camcontrol? That is guaranteed not to work on
non-CAM systems. You should use the GEOM ident string if you need an ID.
I imagine we could get the info from many places, and to be honest, I never
knew
/div/td/tr/tbody/table/td/tr/tbody/table/divdiv
class=utdU2e/divdiv class=tx78Ic/divdiv
class=aHl/divdiv id=:2il tabindex=-1/divdiv id=:2i7
class=ii gt m1419842a752abb3c adP adOdiv id=:2i6
style=overflow: hidden;testbr__
On Tue, Oct 8, 2013 at 9:29 AM, Alexander
On 10/08/13 23:21, Kurt Lidl wrote:
On 10/8/2013, Nathan Whitehorn wrote:
On 10/07/13 21:59, Allan Jude wrote:
Devin Teske and I have been working on a big patch to bsdinstall to
implement installing on a ZFS pool. It supports both GPT and MBR,
the 4k
sector gnop trick, and optional GELI
Which has the latest source?
On Tue, Oct 8, 2013 at 4:11 AM, Boris Samorodov b...@passap.ru wrote:
08.10.2013 11:55, Boris Samorodov пишет:
08.10.2013 11:45, Joe Nosay пишет:
I've ran into compiling problems with some ports. World and kernel have
not
yet been rebuilt. 10.x is a
Hello, Daniel.
You wrote 8 октября 2013 г., 19:40:23:
DN If they get the package repositories back up - which I assume will
DN happen before any official releases from 10 - it should just be pkg
DN install rcs. As challenges go, that doesn't seem too bad?
Topic starter mentioned, that
On Tue, Oct 08, 2013 at 09:38:14PM +, Thomas Mueller wrote:
To cross install FreeBSD on a system without the required users/groups
you must either install them on the base system so that install and
mtree can use them or use the -DDB_FROM_SRC option when running the
To cross install FreeBSD on a system without the required users/groups
you must either install them on the base system so that install and
mtree can use them or use the -DDB_FROM_SRC option when running the
installworld/installkernel/distribution targets.
-- Brooks
That worked for
What were you testing?
On Tue, Oct 8, 2013 at 5:25 PM, Joe Nosay superbisq...@gmail.com wrote:
/div/td/tr/tbody/table/td/tr/tbody/table/divdiv
class=utdU2e/divdiv class=tx78Ic/divdiv class=aHl/divdiv
id=:2il tabindex=-1/divdiv id=:2i7 class=ii gt m1419842a752abb3c
adP adOdiv id=:2i6
On Tue, Oct 08, 2013 at 05:01:35PM -0300, Nilton Jose Rizzo wrote:
Em Tue, 08 Oct 2013 09:43:19 -0700, Eric L. Camachat escreveu
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 10/08/2013 07:17, Nilton Jose Rizzo wrote:
root@valfenda:/usr/ports/emulators/virtualbox-ose # kldload
On Tue, Oct 8, 2013 at 5:21 AM, Teske, Devin devin.te...@fisglobal.comwrote:
On Oct 7, 2013, at 10:48 PM, Allan Jude wrote:
On 2013-10-08 01:11, Teske, Devin wrote:
On Oct 7, 2013, at 10:07 PM, Allan Jude wrote:
On 2013-10-07 15:59, Allan Jude wrote:
Devin Teske and I have been
On 2013-10-08, at 11:17 AM, Freddie Cash fjwc...@gmail.com wrote:
I haven't kept up-to-date with all the developments, but isn't this part of
the bsdinstall/pkgng plan? Once the pkgng repos are all available and
populated, then bsdinstall will be able to install packages from there during
TB --- 2013-10-08 18:40:20 - tinderbox 2.20 running on freebsd-current.sentex.ca
TB --- 2013-10-08 18:40:20 - FreeBSD freebsd-current.sentex.ca 8.3-PRERELEASE
FreeBSD 8.3-PRERELEASE #0: Mon Mar 26 13:54:12 EDT 2012
d...@freebsd-current.sentex.ca:/usr/obj/usr/src/sys/GENERIC amd64
TB ---
On Oct 8, 2013, at 2:28 PM, Nathan Whitehorn wrote:
On 10/08/13 23:21, Kurt Lidl wrote:
On 10/8/2013, Nathan Whitehorn wrote:
On 10/07/13 21:59, Allan Jude wrote:
Devin Teske and I have been working on a big patch to bsdinstall to
implement installing on a ZFS pool. It supports both GPT
TB --- 2013-10-08 18:40:20 - tinderbox 2.20 running on freebsd-current.sentex.ca
TB --- 2013-10-08 18:40:20 - FreeBSD freebsd-current.sentex.ca 8.3-PRERELEASE
FreeBSD 8.3-PRERELEASE #0: Mon Mar 26 13:54:12 EDT 2012
d...@freebsd-current.sentex.ca:/usr/obj/usr/src/sys/GENERIC amd64
TB ---
On 2013-10-08 16:17, Nathan Whitehorn wrote:
On 10/07/13 21:59, Allan Jude wrote:
Devin Teske and I have been working on a big patch to bsdinstall to
implement installing on a ZFS pool. It supports both GPT and MBR, the 4k
sector gnop trick, and optional GELI encryption. We would like to
On Tue, Oct 08, 2013 at 04:56:46PM -0400, Kurt Lidl wrote:
On 10/8/13 4:33 PM, Cy Schubert wrote:
In message 52542687.7000...@pix.net, Kurt Lidl writes:
On 10/8/13, Julian Elischer wrote:
On 10/7/13 11:06 PM, Steve Kargl wrote:
On Sun, Oct 06, 2013 at 10:43:21PM -0400, Eitan Adler wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 10/08/2013 15:01, Jimmy Kelley wrote:
On Tue, Oct 08, 2013 at 05:01:35PM -0300, Nilton Jose Rizzo wrote:
Em Tue, 08 Oct 2013 09:43:19 -0700, Eric L. Camachat escreveu
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 10/08/2013 07:17,
Hi, Reference:
From: Benjamin Kaduk ka...@mit.edu
Date: Tue, 8 Oct 2013 20:07:59 -0400 (EDT)
Benjamin Kaduk wrote:
[-re]
On Mon, 7 Oct 2013, Julian H. Stacey wrote:
The fourth ALPHA build of the 10.0-RELEASE release cycle is now available
on the FTP servers for the
Em Tue, 08 Oct 2013 17:34:33 -0700, Eric L. Camachat escreveu
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 10/08/2013 15:01, Jimmy Kelley wrote:
On Tue, Oct 08, 2013 at 05:01:35PM -0300, Nilton Jose Rizzo wrote:
Em Tue, 08 Oct 2013 09:43:19 -0700, Eric L. Camachat escreveu
On Wed, Oct 09, 2013 at 02:46:32AM +0200, Julian H. Stacey wrote:
I had supposed an Alpha /usr/src would compile even if it broke at run
time.
Not so, 10.0-ALPHA4 src/ is broken (with without obj depend).
cd /usr/src ; make -i install
I thought buildworld+installworld was
On Tue, Oct 8, 2013 at 7:13 PM, Allan Jude free...@allanjude.com wrote:
On 2013-10-08 16:17, Nathan Whitehorn wrote:
On 10/07/13 21:59, Allan Jude wrote:
Devin Teske and I have been working on a big patch to bsdinstall to
implement installing on a ZFS pool. It supports both GPT and MBR,
On Tue, Oct 8, 2013 at 10:30 PM, Outback Dingo outbackdi...@gmail.comwrote:
On Tue, Oct 8, 2013 at 7:13 PM, Allan Jude free...@allanjude.com wrote:
On 2013-10-08 16:17, Nathan Whitehorn wrote:
On 10/07/13 21:59, Allan Jude wrote:
Devin Teske and I have been working on a big patch to
On Tue, Oct 8, 2013 at 9:58 AM, Ganbold Tsagaankhuu ganb...@gmail.comwrote:
Zbigniew,
On Tue, Oct 8, 2013 at 3:54 AM, Zbigniew Bodek z...@freebsd.org wrote:
Hello.
I would like to present a patch for ns8250 serial that I would like to
commit in the near future (if there are no
But where is DB_FROM_SRC documented? I never saw it anywhere. UPDATING
file needs to be updated for installing FreeBSD on a partition where there
is no OS installed.
It's documented in Makefile.inc1 where the less commonly used options
are documented. It should be documented in the
Thomas Mueller wrote this message on Wed, Oct 09, 2013 at 03:00 +:
But where is DB_FROM_SRC documented? I never saw it anywhere. UPDATING
file needs to be updated for installing FreeBSD on a partition where
there is no OS installed.
It's documented in Makefile.inc1 where the
82 matches
Mail list logo
