On March 22, 2015 4:19:23 AM WET, Adrian Chadd wrote:
>Ok, so I'd cycle that rfkill gpio from 1 -> uhm, whatever the max for
>that thing is (16?)
>
>Each time:
>
>ifconfig wlan0 down
>sysctl dev.ath.0.rfkill=X
>ifconfig wlan0 up
>ifconfig wlan0 list scan
>
>See if it sees anything.
It seems to
On Sun, Mar 22, 2015 at 12:38 AM, Adrian Chadd wrote:
> On 21 March 2015 at 17:33, Miguel Clara wrote:
> >
> >
> > On Sat, Mar 21, 2015 at 3:21 PM, Adrian Chadd
> wrote:
> >>
> >> Hi,
> >>
> >> It may be rfkill then. It may be that th
On Sat, Mar 21, 2015 at 3:21 PM, Adrian Chadd wrote:
> Hi,
>
> It may be rfkill then. It may be that there's a GPIO pin wired up
> somewhere that needs updating. Erk.
>
> Someone buy me one of these laptops so I can see what's going on? :)
>
>
Mine (Acer Acer Aspire S3-391) costs around 650€ I th
On Sat, Mar 21, 2015 at 8:17 AM, Anders Bolt-Evensen
wrote:
> Do you mean to check dmesg -a while doing "vmstat -ia | grep ath0"?
> I did run "wlandebug +scan", then ifconfig wlan0 up scan and then "vmstat
> -ia | grep ath0".
> The only output I got from "vmstat -ia | grep ath0" is:
> irq18: ath0
On Fri, Mar 20, 2015 at 7:01 PM, Kevin Oberman wrote:
> On Fri, Mar 20, 2015 at 7:47 AM, Miguel Clara
> wrote:
>
>>
>> On Thu, Feb 26, 2015 at 2:52 AM, Garrett Cooper
>> wrote:
>>
>>>
>>> On Feb 25, 2015, at 18:08, Kevin Oberman wrote:
>
On Fri, Mar 20, 2015 at 6:01 PM, Adrian Chadd wrote:
> On 20 March 2015 at 09:52, Anders Bolt-Evensen
> wrote:
> > Hello!
> >
> > Recently I had to buy a new computer as my Mac broke down.
> > I ended up with an Acer Aspire V17 Nitro, which, except for a couple of
> > problems, is all good.
> >
On Thu, Feb 26, 2015 at 2:52 AM, Garrett Cooper
wrote:
>
> On Feb 25, 2015, at 18:08, Kevin Oberman wrote:
>
> On Wed, Feb 25, 2015 at 2:30 PM, Garrett Cooper
> wrote:
>
>> On Feb 25, 2015, at 14:19, Miguel Clara wrote:
>>
>> ...
>>
>> >
On Thu, Mar 5, 2015 at 8:35 PM, Miguel Clara wrote:
>
> On Thu, Mar 5, 2015 at 8:29 PM, Kris Moore wrote:
>
>> On 03/05/2015 14:54, Miguel Clara wrote:
>> > On Thu, Mar 5, 2015 at 7:52 PM, Miguel Clara
>> wrote:
>> >
>> >> This is a issu
On Thu, Mar 5, 2015 at 8:29 PM, Kris Moore wrote:
> On 03/05/2015 14:54, Miguel Clara wrote:
> > On Thu, Mar 5, 2015 at 7:52 PM, Miguel Clara
> wrote:
> >
> >> This is a issue I've noticed in Lumina last week, but seems to be
> realted
> >> to some
On Thu, Mar 5, 2015 at 7:52 PM, Miguel Clara wrote:
>
> This is a issue I've noticed in Lumina last week, but seems to be realted
> to some change in CURRENT.
>
> I'm running an older build on another laptop with no issues:
> 11.0-CURRENT FreeBSD 11.0-CURRENT #7
after that might have introduce it, or if its maybe
something else.. Both run the same version of Xorg.
Melhores Cumprimentos // Best Regards
-------
*Miguel Clara*
*IT - Sys Admin & Developer*
*E-mail:*miguelmcl...@gmail.com
www.linkedin
On Wed, Feb 25, 2015 at 9:58 PM, Kevin Oberman wrote:
> On Tue, Feb 24, 2015 at 6:05 PM, Miguel Clara
> wrote:
>
>>
>>
>> On Wed, Feb 25, 2015 at 1:58 AM, Miguel Clara
>> wrote:
>>
>>>
>>> On Wed, Feb 25, 2015 at 12:26 AM, Miguel Clara
On Wed, Feb 25, 2015 at 1:58 AM, Miguel Clara
wrote:
>
> On Wed, Feb 25, 2015 at 12:26 AM, Miguel Clara
> wrote:
>
>>
>> On Tue, Feb 24, 2015 at 11:11 PM, Kevin Oberman
>> wrote:
>>
>>> On Tue, Feb 24, 2015 at 10:53 AM, Miguel Clara
>>> wr
On Wed, Feb 25, 2015 at 12:26 AM, Miguel Clara
wrote:
>
> On Tue, Feb 24, 2015 at 11:11 PM, Kevin Oberman
> wrote:
>
>> On Tue, Feb 24, 2015 at 10:53 AM, Miguel Clara
>> wrote:
>>
>>> On Tue, Feb 24, 2015 at 6:13 PM, Garrett Cooper
>>> wrote:
On Tue, Feb 24, 2015 at 11:11 PM, Kevin Oberman wrote:
> On Tue, Feb 24, 2015 at 10:53 AM, Miguel Clara
> wrote:
>
>> On Tue, Feb 24, 2015 at 6:13 PM, Garrett Cooper
>> wrote:
>>
>> > On Feb 24, 2015, at 6:35, Miguel Clara wrote:
>> >
>> >
On Tue, Feb 24, 2015 at 6:58 PM, Garrett Cooper
wrote:
> On Feb 24, 2015, at 10:53, Miguel Clara wrote:
>
> >
> > On Tue, Feb 24, 2015 at 6:13 PM, Garrett Cooper
> wrote:
> > On Feb 24, 2015, at 6:35, Miguel Clara wrote:
> >
> > > ]# rcorder /e
On Tue, Feb 24, 2015 at 6:13 PM, Garrett Cooper
wrote:
> On Feb 24, 2015, at 6:35, Miguel Clara wrote:
>
> > ]# rcorder /etc/rc.d/* /usr/local/etc/rc.d/* >/dev/null
> > rcorder: file `/usr/local/etc/rc.d/tcsd' is before unknown provision
> `kerberos'
> >
lar dependency on provision `mountcritremote' in file
`/etc/rc.d/SERVERS'.
rcorder: requirement `tpmd' in file `/usr/local/etc/rc.d/tcsd' has no
providers.
rcorder: Circular dependency on file `/usr/local/etc/rc.d/uuidd'.
rcorder: requirement `usbd' in file `/usr/
On February 24, 2015 5:10:35 AM WET, Garrett Cooper
wrote:
>On Feb 23, 2015, at 20:07, Miguel Clara wrote:
>
>> On Tue, Feb 24, 2015 at 1:18 AM, NGie Cooper
>wrote:
>> On Mon, Feb 23, 2015 at 10:43 AM, Miguel Clara
> wrote:
>> > I don't think this is a
On Tue, Feb 24, 2015 at 1:18 AM, NGie Cooper wrote:
> On Mon, Feb 23, 2015 at 10:43 AM, Miguel Clara
> wrote:
> > I don't think this is a 11-Current issue per say but probalby bad config,
> > but since I'm using CURRENT I dicided to post to the list.
> >
>
On February 23, 2015 10:04:19 PM WET, Miguel Clara
wrote:
>Probably does... I'll reboot to make sure, but that will surely do it
>:)
>
>I wasn't aware we could set ldconfig in the rc.d scripts... thanks for
>sharing.
>
>
>
Hum just tested and its still starti
Probably does... I'll reboot to make sure, but that will surely do it :)
I wasn't aware we could set ldconfig in the rc.d scripts... thanks for
sharing.
Melhores Cumprimentos // Best Regards
-------
*Miguel Clara*
*IT - Sys Admin & Deve
I don't think this is a 11-Current issue per say but probalby bad config,
but since I'm using CURRENT I dicided to post to the list.
When my system boots dnscrypt fails to start with:
Shared object "libsodium.so.13" not found, required by "dnscrypt-proxy"
But manual start works without issue, I'
On Wed, Feb 18, 2015 at 12:09 AM, Lundberg, Johannes <
johan...@brilliantservice.co.jp> wrote:
> Hi
>
> Good job! Will do some testing! As for the i915 driver, what versions are
> supported? Up until and including HD4000 Gen7 Ivy bridge?
>
> --
> Johannes Lundberg
> BRILLIANTSERVICE CO., LTD.
>
On Sun, Feb 1, 2015 at 2:47 PM, Miguel Clara wrote:
>
> On Sat, Jan 31, 2015 at 10:21 PM, Alexandr Krivulya <
> shur...@shurik.kiev.ua> wrote:
>
>> 31.01.2015 10:30, Miguel Clara пишет:
>> > On Sat, Jan 31, 2015 at 8:19 AM, Elizabeth Myers <
>> elizab...
On Sat, Jan 31, 2015 at 10:21 PM, Alexandr Krivulya
wrote:
> 31.01.2015 10:30, Miguel Clara пишет:
> > On Sat, Jan 31, 2015 at 8:19 AM, Elizabeth Myers <
> elizab...@interlinked.me>
> > wrote:
> >
> >> On 01/31/15 02:15, Miguel Clara wrote:
> >&g
On Sat, Jan 31, 2015 at 8:19 AM, Elizabeth Myers
wrote:
> On 01/31/15 02:15, Miguel Clara wrote:
> > Working fine on a HP running current as I've noted in the other thread
> > as for the keys.
> > This one (and most HP Pavillion models) use the Fn+F(2/3) but the ke
entos // Best Regards
-------
*Miguel Clara*
*IT - Sys Admin & Developer*
*E-mail:*miguelmcl...@gmail.com
www.linkedin.com/in/miguelmclara/
On Sat, Jan 31, 2015 at 6:17 AM, Adrian Chadd wrote:
> On 30 January 2015 at 22:13, Elizabeth Myers
> wrote:
> > On 01/30/
udo sysctl hw.dri.0.i915_backlight=100
hw.dri.0.i915_backlight: 50 -> 100
% intel_backlight
current backlight value: 100% (4882/4882
Melhores Cumprimentos // Best Regards
---
*Miguel Clara*
*IT - Sys Admin & Developer*
*E-mail:*migue
I saw the discussion about how to approach the issue, but totally missed
the patch :D
Thanks, I'll try that... I'm assuming it will make no difference on
10/stable yet? only current?
On Sat, Jan 31, 2015 at 7:22 AM, Elizabeth Myers
wrote:
> On 01/31/15 01:11, Miguel Clara wrot
On the laptop I'm running current, if relevant
Loading acpi_video doesn't do much I don't see any sysctl related to
"lcd0" or "birightness", this is one of those computers with "hybrid"
graphics, intel + ATI card, so not sure if that's somewhat related.
Anyway, I've just tested the drm patc
On Thu, Jan 22, 2015 at 9:39 PM, Henry Hu wrote:
>
>
> On Thu, Jan 22, 2015 at 4:22 PM, Miguel Clara
> wrote:
>
>> Was it working before?
>>
>> For me it never did on 10 or 11
>>
>> I don't see the sysctl and xbacklight reports: "No outpu
// Best Regards
-------
*Miguel Clara*
*IT - Sys Admin & Developer*
*E-mail:*miguelmcl...@gmail.com
www.linkedin.com/in/miguelmclara/
On Thu, Jan 22, 2015 at 9:07 PM, Ranjan1018 . <21474...@gmail.com> wrote:
> Just upgraded my laptop from r277395 to r27753
I've recently created a port for linux-sublime and some of the packages users
might add to sublime require loading pty. I haven't read the full thread so I'm
not sure what would actually be removed but If there no reason for it I don't
see why waste the time on such a task.
is there for example
On Tue, Nov 4, 2014 at 5:10 PM, Allan Jude wrote:
> On 11/04/2014 11:17, Kris Moore wrote:
> > On 11/04/2014 10:24, Kurt Jaeger wrote:
> >> Hi!
> >>
> >>> If you don't need any USB devices to boot, you can delay their
> >>> detection by loading the modules through /etc/rc.d/kld instead
> >>> of t
ssphrase is entered!?
Thanks
Melhores Cumprimentos // Best Regards
-------
*Miguel Clara*
*IT - Sys Admin & Developer*
*E-mail:*miguelmcl...@gmail.com
www.linkedin.com/in/miguelmclara/
On Thu, Aug 28, 2014 at 5:01 PM, dweimer wrote:
>
On June 6, 2014 4:23:06 AM GMT+01:00, Miguel Clara
wrote:
>Ah great I'll sync my source and recompile :)
>
>Thanks
>
>
>Melhores Cumprimentos // Best Regards
>-------
>*Miguel Clara*
>*IT - Sys Admin & Developer*
Ah great I'll sync my source and recompile :)
Thanks
Melhores Cumprimentos // Best Regards
---
*Miguel Clara*
*IT - Sys Admin & Developer*
*E-mail:*miguelmcl...@gmail.com
www.linkedin.com/in/miguelmclara/
On Fri, Jun 6,
On June 5, 2014 9:11:22 PM GMT+01:00, Allan Jude wrote:
>On 2014-06-05 15:54, Miguel Clara wrote:
>>
>> In FreeBSD 10 if I fail to type my geli passphase at boot I can try 2
>more times...
>>
>> In 11 current I see the 3 attempts too.. But I fail the the first i
still see this issue.
Is anyone else using geli on current and noticing this behavior?
Note: using zfs... Not sure if that might be related but I also have zfs+geli
on 10 and works nice.
Thanks,
Miguel Clara
___
freebsd-current@freebsd.org mailing
SIGNED MESSAGE-
> > Hash: SHA512
> >
> >
> >
> > On 11 April 2014 08:30:36 WEST, Andreas Nilsson
> wrote:
> > >On Fri, Apr 11, 2014 at 8:24 AM, Aleksandr Rybalko
> > >wrote:
> > >
> > >> On Fri, 11 Apr 2014 02:07:43 +0100
Hum... I've found this:
http://lists.freebsd.org/pipermail/svn-src-head/2013-December/054676.html
Does this mean that it should actually be disabled by default?
On Fri, Apr 11, 2014 at 2:06 AM, Miguel Clara wrote:
> TTYs and even using the console in Xfce terminal
>
>
> On Fri
TTYs and even using the console in Xfce terminal
On Fri, Apr 11, 2014 at 2:05 AM, Glen Barber wrote:
> On Fri, Apr 11, 2014 at 02:02:01AM +0100, Miguel Clara wrote:
> > On Fri, Apr 11, 2014 at 1:56 AM, Glen Barber wrote:
> >
> > > On Fri, Apr 11, 2014 at 01:52:34AM +
When I for example use "TAB" to complete and there's more than one
result... or none!
Happens to me both in FreeBSD 11 current (HP Laptop) and with 10+VT
On Fri, Apr 11, 2014 at 1:56 AM, Glen Barber wrote:
> On Fri, Apr 11, 2014 at 01:52:34AM +0100, Miguel Clara wrote
WIth syscons this can be done with
# sysctl hw.syscons.bell=0
But after kernel is compiled with VT this systcl is of course not possible
anymore!
Any alternative?
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/f
As I mention the laptop has TWO drives: 1 HDD and 1 SSD, which was why I
wanted to try this setup.
But firstly I don't wan't geli+trim so I use the full HDD with zfs+geli,
which means the SSD would be unused!
Before this setup I was using the SSD for the "system" with UFS+trim+geli,
but later I f
Ah.. my bad its "0x47217" not 21 :P
works:
ndis0: flags=8802 metric 0 mtu 1500
ether ac:81:12:35:79:73
nd6 options=29
media: IEEE 802.11 Wireless Ethernet autoselect
(autoselect )
status: no carrier
On Fri, Jan 24, 2014 at 4:49 PM, Miguel Cl
they posting updates to
> FreeBSD-HEAD so it can be included in the base system?
>
> Does anyone have a contact email for the author, Vadislav?
>
>
> -a
>
>
> On 24 January 2014 03:52, Thomas Mueller wrote:
>> To Miguel Clara, you might try a USB wireless adapter.
ain NDIS and it can't work for later
> NDIS APIs.
>
>
> -a
>
> On 23 January 2014 16:54, Miguel Clara wrote:
>> Hi Adrian, when you say "I'm going to deprecate NDIS", does this also
>> mean there a change to have this driver working without ndis in
*sorry
"mean there a change" --> "mean there's a chance"
On Fri, Jan 24, 2014 at 12:54 AM, Miguel Clara wrote:
> Hi Adrian, when you say "I'm going to deprecate NDIS", does this also
> mean there a change to have this driver working withou
> It's actually fpu code in ndis drivers. I'm going to deprecate NDIS
> this year, so ..
>
> OTOH, the FPU save support would be cool.
>
>
> -a
>
>
> On 22 January 2014 20:10, Miguel Clara wrote:
>> Getting a panic: Unregistered use of FPU in kernel
>
Getting a panic: Unregistered use of FPU in kernel
There seems to be a patch for FreeBSD 10, but not sure if it wold apply
http://www.freebsd.org/cgi/query-pr.cgi?pr=165622&sourceid=opensearch
Thanks
___
freebsd-current@freebsd.org mailing list
http
On Wed, Sep 25, 2013 at 12:42 AM, Miguel Clara wrote:
> Sorry for the late reply...
>
> Worked like a charm! So the issue should be indeed fixed!
>
>
> On Sun, Sep 22, 2013 at 10:25 PM, Miguel Clara wrote:
>
>> Interesting Idea... I wasn't aware the snapshots were
Sorry for the late reply...
Worked like a charm! So the issue should be indeed fixed!
On Sun, Sep 22, 2013 at 10:25 PM, Miguel Clara wrote:
> Interesting Idea... I wasn't aware the snapshots were from previous
> versions before the regressions, thanks for the heads up!
>
> Ti
Interesting Idea... I wasn't aware the snapshots were from previous
versions before the regressions, thanks for the heads up!
Time to put this to the test, I'll report back after compiling r255788
thanks!
>
> > The link I gave to you contains a snapshot as per r255342 (which is
> > way before th
ompile, I'm out of luck!
Unfortunately the one available on the ftp at the moment is alpha2, which
is the one with the problem!
On Sun, Sep 22, 2013 at 9:56 PM, Miguel Clara wrote:
> Hum, its probably best to take a scrennshot since I can't copy this from
>
> the console!
>
o wait for a new snapshot.
On Sun, Sep 22, 2013 at 10:40 PM, Davide Italiano wrote:
>
>
> ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/amd64/amd64/ISO-IMAGES/10.0/
>
>
> Thanks,
>
> --
> Davide
>
On Sun, Sep 22, 2013 at 10:40 PM, Davide Italiano wrote:
>
&g
http://img833.imageshack.us/img833/259/1dpu.jpg
On Sun, Sep 22, 2013 at 9:43 PM, Davide Italiano wrote:
> On Sun, Sep 22, 2013 at 1:40 PM, Miguel Clara
> wrote:
> > Its definatly not related to GCC, I'm getting the same while trying to
> > "buildkernel", I
Its definatly not related to GCC, I'm getting the same while trying to
"buildkernel", I'm trying to upgrade to a more recent current version! Same
kernel panic is showing...
No one else had this problem yet?
Thanks
On Sun, Sep 22, 2013 at 6:12 PM, Miguel Clara wrote:
>
I'm trying to build kdelibs on 10.0 Alpha 2, however after 3 triesI get
a panic while building gcc, but I'm not sure if its related or just
coincidence!
---
Kernel 12 trap 12 with interrupts disable
Fatal trap 12: page fault in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x30
No dia 03/07/2013 10:01, "Miguel Clara" escreveu:
> I am not using windows... I changed to FreeBSD.
>
> I did use it before reinstalling the OS. Acer provides the realtek driver
> but doesn't specify details about the module/device.
> No dia 03/07/2013 05:04, "
gt;
>
>
> On Tue, Jul 2, 2013 at 6:17 PM, Miguel Clara wrote:
>
>> pciconf shows nothing related to the card reader, and I have no device
>> listed has 'none' in there which is why I was looking into usbconfig. I
>> should have clarified that... sorry
pciconf shows nothing related to the card reader, and I have no device
listed has 'none' in there which is why I was looking into usbconfig. I
should have clarified that... sorry
No dia 03/07/2013 01:58, "Zaphod Beeblebrox" escreveu:
> On Tue, Jul 2, 2013 at 9:24 PM, Mike C. wrote:
>
>> On 07/0
On Sat Jun 22 04:39:09 2013, Matthew D. Fuller wrote:
> On Sat, Jun 22, 2013 at 12:29:49AM + I heard the voice of
> Miguel Clara, and lo! it spake thus:
>>
>> The only way to turn off is but "force" and this can cause damage to
>> filesystems, this is indeed
Mark Felder feld.me> writes:
>
> On Fri, 14 Jun 2013 12:05:13 -0500, Miguel Clara
gmail.com>
> wrote:
> >
> > I wouldn't consider having no visual output from a laptop when you
> > reboot/shutdown low priority...
> > But that's not for me to
On 06/14/13 15:24, Mark Felder wrote:
> On Fri, 14 Jun 2013 11:11:17 -0500, Miguel Clara
> wrote:
>
>>
>> Is this something that will be fixed anytime soon?
>> What about the black screen on reboot? Is that normal?
>
> That is also the same issue -- once you s
On 06/14/13 15:02, Mark Felder wrote:
> On Fri, 14 Jun 2013 10:56:26 -0500, Miguel Clara
> wrote:
>
>> I still have some problems though... I can't switch to console with
>> CRTL+ALT+F1...2..3... etc I get a very weired screen, like my kde all
>> nuts... the goo
On 06/14/13 14:42, Walter Hurry wrote:
> I'm running FreeBSD 10.0-CURRENT (r251572) amd64 in a VirtualBox VM.
>
> Everything seems to work properly, except that I cannot 'startx'. All I
> get is a blank screen and an apparently hung box. The only way out of it
> is Machine -> Close -> Send the sh
Note: I also tried "sysctl hw.xhci.xhci_port_route=-1" and =1 has I wasn't
>> sure what would be correct but none of those helped!
>>
>> Thanks
>> Enviado a partir do meu smartphone BlackBerry® www.blackberry.com
>>
>> -Original Message-
&
-Original Message-
> From: Glen Barber
> Date: Tue, 4 Jun 2013 23:45:34
> To: Miguel Clara
> Cc:
> Subject: Re: Memstick Images not working (mountroot prompt)
>
> Hi,
>
> On Wed, Jun 05, 2013 at 04:33:19AM +0100, Miguel Clara wrote:
>> Hello,
>>
>>
Hello,
I need to Install FreeBSD 10 on my laptop to have Wireless support for
my card (ath) however I tried all of the available memstick images at:
ftp://ftp.uk.freebsd.org/pub/FreeBSD/snapshots/amd64/amd64/ISO-IMAGES/10.0/
And none of them works... I've tried 2 different pen drivers, one of
tho
71 matches
Mail list logo
