Hi,
i am little bit weak in networking concept, i have two network interfaces
usb0 and eth0, eth0 is connected to a static ip, which works perfectly
fine, now i want that usb0 should be able to access static ip which is
connected to eth0,
can anyone guide me proper solutionwith command for this
Hi,
I want to add up a kernel module to my linux kernel,currently i am mannuly
changing .config file to include my new module but i want to add it as
option in menuconfig from where i choose it where it should be included or
not...
Thanks
___
Hi,
i am creating and testing vlan using these commands,
*ifconfig arge0 192.168.100.10 netmask 255.255.255.0*
*
*
*ifconfig vlan4 create*
*ifconfig vlan4 vlandev arge0 vlan 4*
*ifconfig vlan4 192.168.1.10 netmask 255.255.255.0*
here arge0 is the default interface of my ethernet device,
now i
Hi guys,
Is there any way that i can have multiple interfaces which i can able to
access from any other machine for same single network card, I am able to
create new interfaces like
# ifconfig arge0.1 create
but i am unable to access it frm any other machine. I want it be able to
oing from any
be for
On Tue, Mar 12, 2013 at 6:08 AM, Tom Evans tevans...@googlemail.com wrote:
On Tue, Mar 12, 2013 at 7:43 AM, Yasir hussan kolya...@gmail.com wrote:
Hi guys,
Is there any way that i can have multiple interfaces which i can able to
access from any other machine for same single network card, I am
, Does any one have used it, kindly guide
me about it
Thanks
On Tue, Mar 12, 2013 at 5:06 PM, Ian FREISLICH i...@clue.co.za wrote:
Yasir hussan wrote:
Thanks for notic but all the elebration was for make alias on one
interface but i want to have multiple interface, i can no where that
some
U say u were successfully using vlans by vlandev in FreeBSD , Can u send
me exact commands and configuration which u were applying, It will be very
helpful for me...
Thank
On Tue, Mar 12, 2013 at 11:39 PM, John-Mark Gurney j...@funkthat.com wrote:
Yasir hussan wrote this message on Tue, Mar
i just want to run multiple IPs for single network card in freebsd
On Sat, Mar 9, 2013 at 2:55 AM, Yasir hussan kolya...@gmail.com wrote:
Hi,
Does anyone know usage of multi-homing in freebsd, if YES kindly guid me
how i can test it on my own PC.
Thanks
:
On Sat, Mar 9, 2013 at 3:04 AM, Yasir hussan kolya...@gmail.com wrote:
i just want to run multiple IPs for single network card in freebsd
OK. A better question. About the only caution I can give here (assuming
you don't mean something more interesting like vlans and whatnot) is that
if both IP
US company.
To be exact: The ranges from RFC1918 are 10.0.0.0/8, 172.16.0.0 /20
and 192.168.0.0/24.
On Sat, Mar 9, 2013 at 9:57 AM, Yasir hussan kolya...@gmail.com wrote:
Kindly will u give me example with cammand line, which can test on my
freebsd machine, i want two ips 192.168.1.100
Hi,
Does anyone know usage of multi-homing in freebsd, if YES kindly guid me
how i can test it on my own PC.
Thanks
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to
hi,
i am trying to build up vlan feature for chip ar8316 in freebsd, i am yet
able to make a single defualt vlan which is working properly, where i am
failing is i guess is in calculate the port destination masks and load
vlansinto the vlan translation unit, i am tring to copy style of
open-wrt,
vlan with ids 1,2 should be created which would be working fine
by just upgrading registers, if i am missing something u can it...
Thanks,
On Tue, Feb 19, 2013 at 10:07 PM, Yasir hussan kolya...@gmail.com wrote:
hi,
i am trying to build up vlan feature for chip ar8316 in freebsd, i am yet
hi,
i am have make some changes in my freebsd acutally have replaced mii bus
with my own switch bus and have put some code of switch but after i
successfully build kernel and world when i try to run it on machine it just
hangs up at boot time after this
ar7100 bootm
change bootargs
hi,
is there anyone who knows how i can test vlan feature using *etherswitchcfg*,
it tried to set and get vlan configuration for chip ar8316 it shows me
right output like
#etherswitchcfg
port0:
vlangroup: 1
media: Ethernet 1000baseT full-duplex
status: active
port1:
hi,
can anyone help me how i can download this code, i tried to downlaod
differnect id by using svn but still fail, i think i am missing something
from basics
http://zrouter.org/hg/FreeBSD/head/file/a7c552e1ed7f/head/sys/dev/switch/ar8x16_switch.c
Thanks
hi,
is there anyone who knows how i can test vlan feature using *etherswitchcfg*,
it tried to set and get vlan configraton for chip ar8316 it shows me right
output, but i still dont know how i should test it with its limited
commands.
Plz anyone who knows kindly inform me detailed setup to test
hi,
i yesterday i was tried to patch file on my freensd code, because it was my
custom code so i had to patch my code by update file to file, with my
calculation everything should go perfectly it didn`t, i am getting some
errors like
cc -c -O -pipe -march=mips32 -std=c99 -g -Wall
Hi,
I saw a report that covers FreeBSD-related projects between October and
December 2010 and I observe that it have new patch for Ethernet Switch
Framework, I have also seen a little bit inside the code of patch(
http://loos.no-ip.org/rspro/switch-1.diff).
I downloaded fresh code of FreeBSD v9
19 matches
Mail list logo
