In message <[EMAIL PROTECTED]>, Kenneth
Wayne Culver wrote:
>Will this solve the problem that your xmbmon seems to solve? With xmbmon I
>can look at the temps for my cpu, but with wmlmmon, it gives me the IOCTL
>error.
>
It can use both ISA interface (by opening /dev/io and banging port
0x295 a
In message <[EMAIL PROTECTED]>, [EMAIL PROTECTED] wrote:
>In <[EMAIL PROTECTED]> Chris D.
>Faulhaber <[EMAIL PROTECTED]> wrote:
>When I remove one of the CPUs and boot UP kernel on the same
>motherboard both 'chm' and 'lmmon' starts to work (also showed
>values for -5V and -12V looks strange).
P
On Wed, 13 Oct 1999 [EMAIL PROTECTED] wrote:
> Additional information:
>
> When I remove one of the CPUs and boot UP kernel on the same
> motherboard both 'chm' and 'lmmon' starts to work (also showed
> values for -5V and -12V looks strange).
>
That's due to the conversion factors for th
In <[EMAIL PROTECTED]> Chris D.
Faulhaber <[EMAIL PROTECTED]> wrote:
> On Mon, 11 Oct 1999, Nickolay Dudorov wrote:
>
>> Does anybody successfully use ports/sysutils/{lmmon|chm}
>> with the Abit's BP6 motherboard ?
>>
>> After 'make install'-ing ports and adding
>>
>> controller smbu
> > Does anybody successfully use ports/sysutils/{lmmon|chm}
> > with the Abit's BP6 motherboard ?
>
> > II only receive:
> > IOCTL: device not configured
> > from lmmon and chm.
>
> I have the same problem with the 'wmhm' port. I also have Abit BP6 with two
> 450 Mhz Celerons.
Ditto. BP6
On Mon, 11 Oct 1999, Nickolay Dudorov wrote:
> Does anybody successfully use ports/sysutils/{lmmon|chm}
> with the Abit's BP6 motherboard ?
>
> After 'make install'-ing ports and adding
>
> controller smbus0
> controller iicbus0
> controller iicbb0
> controller intpm0
> device smb0
On Mon, Oct 11, 1999 at 06:44:50PM +0700, Nickolay Dudorov wrote:
> Does anybody successfully use ports/sysutils/{lmmon|chm}
> with the Abit's BP6 motherboard ?
> II only receive:
> IOCTL: device not configured
> from lmmon and chm.
I have the same problem with the 'wmhm' port. I also have
Does anybody successfully use ports/sysutils/{lmmon|chm}
with the Abit's BP6 motherboard ?
After 'make install'-ing ports and adding
controller smbus0
controller iicbus0
controller iicbb0
controller intpm0
device smb0 at smbus?
to kernel config file (and config, make depend, mak
