megaraid: v107 (December 22, 1999)
megaraid: found 0x8086:0x1960:idx 0:bus 0:slot 10:func 1
scsi1 : Found a MegaRAID controller at 0xd0002000, IRQ: 12
megaraid: [GH6D:1.43] detected 1 logical drives
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.25/3.2.4
Adaptec
At 03:22 PM 2/24/2000 -0800, Mike Smith wrote:
megaraid: v107 (December 22, 1999)
megaraid: found 0x8086:0x1960:idx 0:bus 0:slot 10:func 1
scsi1 : Found a MegaRAID controller at 0xd0002000, IRQ: 12
megaraid: [GH6D:1.43] detected 1 logical drives
scsi0 : Adaptec AHA274x/284x/294x
Hmm. I did some testing, and I can lock both the G6HC and G6HD firmware
up within a few minutes. The Dell 3.00 firmware remains stable under the
same load (20 simultaneous 'bonnie -s 100's). I'm fairly sure it's a
firmware lockup - the SCSI bus is hung and usually the PCI bus as
At 12:26 AM 2/24/2000 -0800, Mike Smith wrote:
OK, on the PERC2/SC and LINUX with the firmware from Dell (3.00), it pukes
with Redhat LINUX. I am able to talk to the card, fdisk and newfs it, but
it crashes hard when you write to the partition. I am going to try and
reflash the card to
At 12:26 AM 2/24/00 -0800, Mike Smith wrote:
OK, on the PERC2/SC and LINUX with the firmware from Dell (3.00), it pukes
with Redhat LINUX. I am able to talk to the card, fdisk and newfs it, but
it crashes hard when you write to the partition. I am going to try and
reflash the card to the
At 09:19 PM 2/22/2000 -0800, Mike Smith wrote:
On 18 Feb 2000 17:39:19 -0500, in sentex.lists.freebsd.current you wrote:
Hmm. I did some testing, and I can lock both the G6HC and G6HD firmware
up within a few minutes. The Dell 3.00 firmware remains stable under the
same load (20
On 18 Feb 2000 17:39:19 -0500, in sentex.lists.freebsd.current you wrote:
Hmm. I did some testing, and I can lock both the G6HC and G6HD firmware
up within a few minutes. The Dell 3.00 firmware remains stable under the
same load (20 simultaneous 'bonnie -s 100's). I'm fairly sure it's a
On 18 Feb 2000 17:39:19 -0500, in sentex.lists.freebsd.current you wrote:
Hmm. I did some testing, and I can lock both the G6HC and G6HD firmware
up within a few minutes. The Dell 3.00 firmware remains stable under the
same load (20 simultaneous 'bonnie -s 100's). I'm fairly sure it's
OK, I took a chance and flashed the card's BIOS to the latest from the AMI
site I had been suspecting BIOS, as the readme.txt mentioned problems
with newer motherboards. Lo and Behold, it seems to have done the trick
amr0: AMI MegaRAID mem 0xe900-0xe93f irq 11 at device 12.1 on
At 07:04 PM 2/16/00 -0800, Mike Smith wrote:
At 05:15 PM 2/16/2000 -0800, Mike Smith wrote:
Hi,
I have been trying to get a PERC 2 (aka MegaRAID 466) working
with
Current. The box worked fine with the 428, but seems to barf with
only the
controller swapped.
I don't think
10 matches
Mail list logo
