Buganini wrote:
> Hi, with yesterday's CURRENT my bwn works partially.
>
> this is my hardware
> siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4
> rev=0x01 hdr=0x00
> vendor = 'Broadcom Corporation'
> device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
>
>Hi, with yesterday's CURRENT my bwn works partially.
>
>this is my hardware
>siba_bwn0 at pci0:4:0:0:class=0x028000 card=0x04b514e4 chip=0x431514e4
>rev=0x01 hdr=0x00
>vendor = 'Broadcom Corporation'
>device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
>class =
Hi, with yesterday's CURRENT my bwn works partially.
this is my hardware
siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
class = network
it work
On Thu, May 20, 2010 at 05:04:51PM +0200, Gustau P??rez wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> En/na Weongyo Jeong ha escrit:
> > On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
> >>> Hello Gustau, I'm so sorry for belated response that I had no time to
Weongyo Jeong wrote:
OK. The patch is ready to test. Could you please test it with attached
patch?
your patch got rid of the "bwn0: unsupported rate 0" messages on my Dell
Inspiron 1150. But it still gives me repeated:
bwn0: RX decryption attempted (old 0 keyidx 0x1)
and a few of the follo
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
En/na Weongyo Jeong ha escrit:
> On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
>>> Hello Gustau, I'm so sorry for belated response that I had no time to
>>> read and work email and wireless stuffs.
>>>
>>> Could you please test
Attilio Rao wrote:
I have another problem where the bwn is fully recognized and wlan0 is
created but the interface doesn't scan at all:
# netstat -nil
Name Mtu Network Address Ipkts Ierrs Idrop
Opkts Oerrs Coll
bwn0 2290 00:26:5e:64:be:750 0 0
On Mon, May 10, 2010 at 11:41:34PM +0200, Ian FREISLICH wrote:
> Weongyo Jeong wrote:
> > > Do you want me to test anything else ?
> >
> > OK. The patch is ready to test. Could you please test it with attached
> > patch?
>
> No panic this time. I also don't get these messages any more:
>
>
On Tue, May 11, 2010 at 10:04:34AM +0200, Ian FREISLICH wrote:
> Ian FREISLICH wrote:
> > Weongyo Jeong wrote:
> > > > Do you want me to test anything else ?
> > >
> > > OK. The patch is ready to test. Could you please test it with attached
> > > patch?
> >
> > No panic this time. I also don
On Sat, May 15, 2010 at 05:02:42PM +0200, Gustau P??rez wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> En/na Weongyo Jeong ha escrit:
> > On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
> >>> Hello Gustau, I'm so sorry for belated response that I had no time to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
En/na Weongyo Jeong ha escrit:
> On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
>>> Hello Gustau, I'm so sorry for belated response that I had no time to
>>> read and work email and wireless stuffs.
>>>
>>> Could you please test
Ian FREISLICH wrote:
> Weongyo Jeong wrote:
> > > Do you want me to test anything else ?
> >
> > OK. The patch is ready to test. Could you please test it with attached
> > patch?
>
> No panic this time. I also don't get these messages any more:
>
> May 10 23:25:36 mini kernel: bwn0: unsuppo
Weongyo Jeong wrote:
> > Do you want me to test anything else ?
>
> OK. The patch is ready to test. Could you please test it with attached
> patch?
No panic this time. I also don't get these messages any more:
May 10 23:25:36 mini kernel: bwn0: unsupported rate 0
May 10 23:26:13 mini last m
On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
>
> >
> > Hello Gustau, I'm so sorry for belated response that I had no time to
> > read and work email and wireless stuffs.
> >
> > Could you please test this symptom with attached patch? It looks in
> > CURRENT it missed to i
On Thu, May 06, 2010 at 10:27:31PM +0200, Attilio Rao wrote:
> 2010/5/6 Weongyo Jeong :
> > On Sun, Apr 25, 2010 at 10:42:16PM +0200, Gustau P?rez wrote:
> >> -BEGIN PGP SIGNED MESSAGE-
> >> Hash: SHA1
> >>
> >>
> >> >> I've been testing the driver for a few time with AMD64/CURRENT. A
> >>
On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
>
> >
> > Hello Gustau, I'm so sorry for belated response that I had no time to
> > read and work email and wireless stuffs.
> >
> > Could you please test this symptom with attached patch? It looks in
> > CURRENT it missed to i
>
> Hello Gustau, I'm so sorry for belated response that I had no time to
> read and work email and wireless stuffs.
>
> Could you please test this symptom with attached patch? It looks in
> CURRENT it missed to initialize a ratectl when it associates with AP.
>
The patch made the machine to p
2010/5/6 Weongyo Jeong :
> On Sun, Apr 25, 2010 at 10:42:16PM +0200, Gustau P?rez wrote:
>> -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA1
>>
>>
>> >> I've been testing the driver for a few time with AMD64/CURRENT. A
>> >> few time ago I started to see messages like :
>> >>
>> >> bwn0: unsupporte
On Sun, Apr 25, 2010 at 10:42:16PM +0200, Gustau P?rez wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
>
> >> I've been testing the driver for a few time with AMD64/CURRENT. A
> >> few time ago I started to see messages like :
> >>
> >> bwn0: unsupported rate 0
> >>
> >> I've checked t
Weongyo Jeong wrote:
> > > The corollery is that it doesn't work first time on reboot. ??I need
> > > to either '/etc/rc.d/netif restart' and if that panics the machine,
> > > destroy wlan0 and then restart netif.
> > >
> > > Then wlan0/bwn0 associates correctly with this device.
>
> If you're a C
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
>> I've been testing the driver for a few time with AMD64/CURRENT. A
>> few time ago I started to see messages like :
>>
>> bwn0: unsupported rate 0
>>
>> I've checked the code and I found it seems to fail when trying to
>> check the TX rate at if_bw.
On Sat, Apr 24, 2010 at 11:42:53PM +0800, Buganini wrote:
> No luck here, it's still keeping scanning channels.
>
> --Buganini
>
> On Thu, Apr 15, 2010 at 1:34 AM, Ian FREISLICH wrote:
> > Buganini wrote:
> >> Hi, I got a Lenovo G450 with
> >> siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4
On Fri, Apr 23, 2010 at 06:44:25PM -0500, James R. Van Artsdalen wrote:
> I have a Dell Zino HD (Mac mini clone, with eSATA ports) that uses the
> BCM4353 chip (called a Dell 1520 card)
>
> no...@pci0:2:0:0:class=0x028000 card=0x000e1028 chip=0x435314e4
> rev=0x01 hdr=0x00
> vendor = '
On Sat, Apr 24, 2010 at 12:33:02AM +0200, Gustau P?rez wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> En/na Weongyo Jeong ha escrit:
> > On Wed, Mar 03, 2010 at 11:10:14AM +0200, Alexandr Rybalko wrote:
> >> On Wed, 3 Mar 2010 00:28:33 -0800
> >> Weongyo Jeong wrote:
> >
> I've been
No luck here, it's still keeping scanning channels.
--Buganini
On Thu, Apr 15, 2010 at 1:34 AM, Ian FREISLICH wrote:
> Buganini wrote:
>> Hi, I got a Lenovo G450 with
>> siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4
>> rev=0x01 hdr=0x00
>> vendor = 'Broadcom Corpo
I have a Dell Zino HD (Mac mini clone, with eSATA ports) that uses the
BCM4353 chip (called a Dell 1520 card)
no...@pci0:2:0:0:class=0x028000 card=0x000e1028 chip=0x435314e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
class = network
Should I expect this to work with to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
En/na Weongyo Jeong ha escrit:
> On Wed, Mar 03, 2010 at 11:10:14AM +0200, Alexandr Rybalko wrote:
>> On Wed, 3 Mar 2010 00:28:33 -0800
>> Weongyo Jeong wrote:
>
I've been testing the driver for a few time with AMD64/CURRENT. A
few time ago I started
Buganini wrote:
> Hi, I got a Lenovo G450 with
> siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4
> rev=0x01 hdr=0x00
> vendor = 'Broadcom Corporation'
> device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
> class = network
>
>
> 4315 is not in supp
Hi
siba_b...@pci0:1:0:0: class=0x028000 card=0x1508103c chip=0x431514e4 rev=0x01
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
class = network
With a fresh -CURRENT and:
72 0xcb104000 9000 siba_bwn.ko
101
Hi, I got a Lenovo G450 with
siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
class = network
4315 is not in supported list, but however the driv
On Mon, Mar 15, 2010 at 12:43:57AM +0200, Alex RAY wrote:
> On Sat, 13 Mar 2010 16:55:58 -0800
> Weongyo Jeong wrote:
>
> > On Sat, Mar 13, 2010 at 11:12:05PM +0200, Alex RAY wrote:
> > > On Fri, 12 Mar 2010 15:13:34 -0800
> > > Weongyo Jeong wrote:
> > >
> > > >
> > > > I thought that your op
On Sat, 13 Mar 2010 16:55:58 -0800
Weongyo Jeong wrote:
> On Sat, Mar 13, 2010 at 11:12:05PM +0200, Alex RAY wrote:
> > On Fri, 12 Mar 2010 15:13:34 -0800
> > Weongyo Jeong wrote:
> >
> > >
> > > I thought that your opinion was right and if mem is
> > > 0xf400-0xf4003fff (16 Kb) I thought
On Sat, Mar 13, 2010 at 11:12:05PM +0200, Alex RAY wrote:
> On Fri, 12 Mar 2010 15:13:34 -0800
> Weongyo Jeong wrote:
>
> >
> > I thought that your opinion was right and if mem is
> > 0xf400-0xf4003fff (16 Kb) I thought the device has 4 cores. However
> > it looks this was wrong according t
On Fri, 12 Mar 2010 15:13:34 -0800
Weongyo Jeong wrote:
>
> I thought that your opinion was right and if mem is
> 0xf400-0xf4003fff (16 Kb) I thought the device has 4 cores. However
> it looks this was wrong according to the below document:
>
> http://voodoowarez.com/bcm5365p.pdf
>
On Wed, Mar 03, 2010 at 11:10:14AM +0200, Alexandr Rybalko wrote:
> On Wed, 3 Mar 2010 00:28:33 -0800
> Weongyo Jeong wrote:
>
> >> On Mon, Mar 01, 2010 at 10:32:40AM +0200, Alexandr Rybalko wrote:
> >> > On Sun, 28 Feb 2010 01:52:59 -0800
> >> > Weongyo Jeong wrote:
> >> >
> >> > Can You test
In message: <261c29701003040928h7aa70b3fm37611f974e0b9...@mail.gmail.com>
Miki writes:
: Rising FIRMWARE_MAX from 30 to 60 did the trick ! thanks !
: Are there any reasons to have such a "low" default value ?
I thought I'd committed this change already :)
Warner
On Thursday 04 March 2010 12:28:59 pm Miki wrote:
> 2010/3/3 John Baldwin :
> > On Tuesday 02 March 2010 2:08:55 pm Miki wrote:
> >> 2010/3/1 Weongyo Jeong :
> >> > On Sun, Feb 28, 2010 at 08:45:32PM +0100, Miki wrote:
> >> >> Hi,
> >> >>
> >> >> Thanks for the work !
> >> >>
> >> >> I have some pr
2010/3/3 John Baldwin :
> On Tuesday 02 March 2010 2:08:55 pm Miki wrote:
>> 2010/3/1 Weongyo Jeong :
>> > On Sun, Feb 28, 2010 at 08:45:32PM +0100, Miki wrote:
>> >> Hi,
>> >>
>> >> Thanks for the work !
>> >>
>> >> I have some problems here when I try to create a wlan interface :
>> >> bwn_v4_uco
On Tue, Mar 02, 2010 at 07:57:26PM +0100, Gustau P?rez wrote:
> En/na John Baldwin ha escrit:
> > On Monday 01 March 2010 3:22:34 pm Gustau P?rez wrote:
> >
> >> En/na Weongyo Jeong ha escrit:
> >>
> >>> On Fri, Feb 26, 2010 at 04:21:06PM -0800, Xin LI wrote:
> >>>
> >>>
> Hi
On Tuesday 02 March 2010 2:08:55 pm Miki wrote:
> 2010/3/1 Weongyo Jeong :
> > On Sun, Feb 28, 2010 at 08:45:32PM +0100, Miki wrote:
> >> Hi,
> >>
> >> Thanks for the work !
> >>
> >> I have some problems here when I try to create a wlan interface :
> >> bwn_v4_ucode5: could not load firmware image
On Wed, 3 Mar 2010 00:28:33 -0800
Weongyo Jeong wrote:
>> On Mon, Mar 01, 2010 at 10:32:40AM +0200, Alexandr Rybalko wrote:
>> > On Sun, 28 Feb 2010 01:52:59 -0800
>> > Weongyo Jeong wrote:
>> >
>> > Can You test your driver without siba_switchcore, I see the device
>> > have mapping for all co
On Mon, Mar 01, 2010 at 10:32:40AM +0200, Alexandr Rybalko wrote:
> On Sun, 28 Feb 2010 01:52:59 -0800
> Weongyo Jeong wrote:
>
> >> On Sat, Feb 27, 2010 at 01:15:35AM +0200, Alex RAY wrote:
> >> > Hi Weongyo,
> >> >
> >> > Can new siba release operate in systems like in this SVG image?
> >> > S
En/na John Baldwin ha escrit:
> On Monday 01 March 2010 3:22:34 pm Gustau Pérez wrote:
>
>> En/na Weongyo Jeong ha escrit:
>>
>>> On Fri, Feb 26, 2010 at 04:21:06PM -0800, Xin LI wrote:
>>>
>>>
Hi, Weongyo,
On 2010/02/25 16:51, Weongyo Jeong wrote:
2010/3/1 Weongyo Jeong :
> On Sun, Feb 28, 2010 at 08:45:32PM +0100, Miki wrote:
>> Hi,
>>
>> Thanks for the work !
>>
>> I have some problems here when I try to create a wlan interface :
>> bwn_v4_ucode5: could not load firmware image, error 2
>> bwn0: the fw file(bwn_v4_ucode5) not found
>
> Did
On Monday 01 March 2010 3:22:34 pm Gustau Pérez wrote:
> En/na Weongyo Jeong ha escrit:
> > On Fri, Feb 26, 2010 at 04:21:06PM -0800, Xin LI wrote:
> >
> >> Hi, Weongyo,
> >>
> >> On 2010/02/25 16:51, Weongyo Jeong wrote:
> >>
> >>> FYI bwn(4) driver is committed into FreeBSD tree. I think
En/na Weongyo Jeong ha escrit:
> On Fri, Feb 26, 2010 at 04:21:06PM -0800, Xin LI wrote:
>
>> Hi, Weongyo,
>>
>> On 2010/02/25 16:51, Weongyo Jeong wrote:
>>
>>> FYI bwn(4) driver is committed into FreeBSD tree. I think the driver
>>> supports your LP PHY device. After cvsup please try t
On Sun, Feb 28, 2010 at 08:45:32PM +0100, Miki wrote:
> Hi,
>
> Thanks for the work !
>
> I have some problems here when I try to create a wlan interface :
> bwn_v4_ucode5: could not load firmware image, error 2
> bwn0: the fw file(bwn_v4_ucode5) not found
Did you try to UP the interface withloa
On Sun, Feb 28, 2010 at 11:56:50PM +, Aditya Sarawgi wrote:
> On Wed, Dec 23, 2009 at 11:51:34AM -0800, Weongyo Jeong wrote:
> > On Wed, Dec 23, 2009 at 08:18:48AM +, Aditya Sarawgi wrote:
> > > On Tue, Dec 22, 2009 at 07:53:31PM -0800, Weongyo Jeong wrote:
> > > > Hello,
> > > >
> > > > N
On Sun, 28 Feb 2010 01:52:59 -0800
Weongyo Jeong wrote:
>> On Sat, Feb 27, 2010 at 01:15:35AM +0200, Alex RAY wrote:
>> > Hi Weongyo,
>> >
>> > Can new siba release operate in systems like in this SVG image?
>> > System example: CPU BCM5836 + Wi-Fi BCM4318
>>
>> Recent changes of siba(4) by mys
Hi,
Thanks for the work !
I have some problems here when I try to create a wlan interface :
bwn_v4_ucode5: could not load firmware image, error 2
bwn0: the fw file(bwn_v4_ucode5) not found
I have installed bwn-firmware-kmod from ports but the only files I have in
/boot/modules are bwn_v4_lp_ucod
On Wed, Dec 23, 2009 at 11:51:34AM -0800, Weongyo Jeong wrote:
> On Wed, Dec 23, 2009 at 08:18:48AM +, Aditya Sarawgi wrote:
> > On Tue, Dec 22, 2009 at 07:53:31PM -0800, Weongyo Jeong wrote:
> > > Hello,
> > >
> > > Now bwn(4) is available at the public and waiting test and review. The
> > >
On Sat, Feb 27, 2010 at 01:15:35AM +0200, Alex RAY wrote:
> Hi Weongyo,
>
> Can new siba release operate in systems like in this SVG image?
> System example: CPU BCM5836 + Wi-Fi BCM4318
Recent changes of siba(4) by myself doesn't change code flow, layout and
doesn't include enhancements if you're
On Fri, Feb 26, 2010 at 04:21:06PM -0800, Xin LI wrote:
> Hi, Weongyo,
>
> On 2010/02/25 16:51, Weongyo Jeong wrote:
> > FYI bwn(4) driver is committed into FreeBSD tree. I think the driver
> > supports your LP PHY device. After cvsup please try to rebuild siba_bwn
> > and bwn modules.
> >
> >
On Fri, 26 Feb 2010 16:21:06 -0800 Xin LI wrote:
> I've asked him to try a
> 9-CURRENT kernel but the Atom based netbook would take some while to
> compile the code =-)
It's very easy/quick to (cross) compile world at a beafy machine
and install the system to an USB stick.
--
WBR, Boris Samorod
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi, Weongyo,
On 2010/02/25 16:51, Weongyo Jeong wrote:
> FYI bwn(4) driver is committed into FreeBSD tree. I think the driver
> supports your LP PHY device. After cvsup please try to rebuild siba_bwn
> and bwn modules.
>
> Could you please test wi
Hi Weongyo,
Can new siba release operate in systems like in this SVG image?
System example: CPU BCM5836 + Wi-Fi BCM4318
And can we compile siba bus code without pci code?
- Cut this to file.svg ---
http://www.w3.org/1999/xlink";
xmlns="http://www.w3.org/2000/svg";>
Layer
On Wed, Dec 23, 2009 at 08:18:48AM +, Aditya Sarawgi wrote:
> On Tue, Dec 22, 2009 at 07:53:31PM -0800, Weongyo Jeong wrote:
> > Hello,
> >
> > Now bwn(4) is available at the public and waiting test and review. The
> > status of this driver is *alpha* so could make panics, warnings and
> > er
57 matches
Mail list logo
