Buganini wrote:
Hi, with yesterday's CURRENT my bwn works partially.
this is my hardware
siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
class
Hi, with yesterday's CURRENT my bwn works partially.
this is my hardware
siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
class = network
it
Hi, with yesterday's CURRENT my bwn works partially.
this is my hardware
siba_bwn0 at pci0:4:0:0:class=0x028000 card=0x04b514e4 chip=0x431514e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
class = network
On Thu, May 20, 2010 at 05:04:51PM +0200, Gustau P??rez wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
En/na Weongyo Jeong ha escrit:
On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
Hello Gustau, I'm so sorry for belated response that I had no time to
read
Weongyo Jeong wrote:
OK. The patch is ready to test. Could you please test it with attached
patch?
your patch got rid of the bwn0: unsupported rate 0 messages on my Dell
Inspiron 1150. But it still gives me repeated:
bwn0: RX decryption attempted (old 0 keyidx 0x1)
and a few of the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
En/na Weongyo Jeong ha escrit:
On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
Hello Gustau, I'm so sorry for belated response that I had no time to
read and work email and wireless stuffs.
Could you please test this symptom
Attilio Rao wrote:
I have another problem where the bwn is fully recognized and wlan0 is
created but the interface doesn't scan at all:
# netstat -nil
Name Mtu Network Address Ipkts Ierrs Idrop
Opkts Oerrs Coll
bwn0 2290 Link#1 00:26:5e:64:be:750 0
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
En/na Weongyo Jeong ha escrit:
On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
Hello Gustau, I'm so sorry for belated response that I had no time to
read and work email and wireless stuffs.
Could you please test this symptom
On Sat, May 15, 2010 at 05:02:42PM +0200, Gustau P??rez wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
En/na Weongyo Jeong ha escrit:
On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
Hello Gustau, I'm so sorry for belated response that I had no time to
read
On Tue, May 11, 2010 at 10:04:34AM +0200, Ian FREISLICH wrote:
Ian FREISLICH wrote:
Weongyo Jeong wrote:
Do you want me to test anything else ?
OK. The patch is ready to test. Could you please test it with attached
patch?
No panic this time. I also don't get these
On Mon, May 10, 2010 at 11:41:34PM +0200, Ian FREISLICH wrote:
Weongyo Jeong wrote:
Do you want me to test anything else ?
OK. The patch is ready to test. Could you please test it with attached
patch?
No panic this time. I also don't get these messages any more:
May 10
Ian FREISLICH wrote:
Weongyo Jeong wrote:
Do you want me to test anything else ?
OK. The patch is ready to test. Could you please test it with attached
patch?
No panic this time. I also don't get these messages any more:
May 10 23:25:36 mini kernel: bwn0: unsupported rate 0
On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
Hello Gustau, I'm so sorry for belated response that I had no time to
read and work email and wireless stuffs.
Could you please test this symptom with attached patch? It looks in
CURRENT it missed to initialize a
Weongyo Jeong wrote:
Do you want me to test anything else ?
OK. The patch is ready to test. Could you please test it with attached
patch?
No panic this time. I also don't get these messages any more:
May 10 23:25:36 mini kernel: bwn0: unsupported rate 0
May 10 23:26:13 mini last
On Fri, May 07, 2010 at 06:08:05PM +0200, Gustavo Perez Querol wrote:
Hello Gustau, I'm so sorry for belated response that I had no time to
read and work email and wireless stuffs.
Could you please test this symptom with attached patch? It looks in
CURRENT it missed to initialize a
On Thu, May 06, 2010 at 10:27:31PM +0200, Attilio Rao wrote:
2010/5/6 Weongyo Jeong weongyo.je...@gmail.com:
On Sun, Apr 25, 2010 at 10:42:16PM +0200, Gustau P?rez wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I've been testing the driver for a few time with AMD64/CURRENT. A
Hello Gustau, I'm so sorry for belated response that I had no time to
read and work email and wireless stuffs.
Could you please test this symptom with attached patch? It looks in
CURRENT it missed to initialize a ratectl when it associates with AP.
The patch made the machine to panic.
On Sun, Apr 25, 2010 at 10:42:16PM +0200, Gustau P?rez wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I've been testing the driver for a few time with AMD64/CURRENT. A
few time ago I started to see messages like :
bwn0: unsupported rate 0
I've checked the code and I found
2010/5/6 Weongyo Jeong weongyo.je...@gmail.com:
On Sun, Apr 25, 2010 at 10:42:16PM +0200, Gustau P?rez wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I've been testing the driver for a few time with AMD64/CURRENT. A
few time ago I started to see messages like :
bwn0: unsupported
Weongyo Jeong wrote:
The corollery is that it doesn't work first time on reboot. ??I need
to either '/etc/rc.d/netif restart' and if that panics the machine,
destroy wlan0 and then restart netif.
Then wlan0/bwn0 associates correctly with this device.
If you're a CURRENT user
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I've been testing the driver for a few time with AMD64/CURRENT. A
few time ago I started to see messages like :
bwn0: unsupported rate 0
I've checked the code and I found it seems to fail when trying to
check the TX rate at if_bw.c:9561 (in
No luck here, it's still keeping scanning channels.
--Buganini
On Thu, Apr 15, 2010 at 1:34 AM, Ian FREISLICH i...@clue.co.za wrote:
Buganini wrote:
Hi, I got a Lenovo G450 with
siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4
rev=0x01 hdr=0x00
vendor =
On Sat, Apr 24, 2010 at 12:33:02AM +0200, Gustau P?rez wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
En/na Weongyo Jeong ha escrit:
On Wed, Mar 03, 2010 at 11:10:14AM +0200, Alexandr Rybalko wrote:
On Wed, 3 Mar 2010 00:28:33 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
On Fri, Apr 23, 2010 at 06:44:25PM -0500, James R. Van Artsdalen wrote:
I have a Dell Zino HD (Mac mini clone, with eSATA ports) that uses the
BCM4353 chip (called a Dell 1520 card)
no...@pci0:2:0:0:class=0x028000 card=0x000e1028 chip=0x435314e4
rev=0x01 hdr=0x00
vendor =
On Sat, Apr 24, 2010 at 11:42:53PM +0800, Buganini wrote:
No luck here, it's still keeping scanning channels.
--Buganini
On Thu, Apr 15, 2010 at 1:34 AM, Ian FREISLICH i...@clue.co.za wrote:
Buganini wrote:
Hi, I got a Lenovo G450 with
siba_b...@pci0:4:0:0: class=0x028000
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
En/na Weongyo Jeong ha escrit:
On Wed, Mar 03, 2010 at 11:10:14AM +0200, Alexandr Rybalko wrote:
On Wed, 3 Mar 2010 00:28:33 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
I've been testing the driver for a few time with AMD64/CURRENT. A
few
I have a Dell Zino HD (Mac mini clone, with eSATA ports) that uses the
BCM4353 chip (called a Dell 1520 card)
no...@pci0:2:0:0:class=0x028000 card=0x000e1028 chip=0x435314e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
class = network
Should I expect this to work with
Hi, I got a Lenovo G450 with
siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
class = network
4315 is not in supported list, but however the
Hi
siba_b...@pci0:1:0:0: class=0x028000 card=0x1508103c chip=0x431514e4 rev=0x01
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
class = network
With a fresh -CURRENT and:
72 0xcb104000 9000 siba_bwn.ko
101
Buganini wrote:
Hi, I got a Lenovo G450 with
siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
class = network
4315 is not in supported
On Mon, Mar 15, 2010 at 12:43:57AM +0200, Alex RAY wrote:
On Sat, 13 Mar 2010 16:55:58 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
On Sat, Mar 13, 2010 at 11:12:05PM +0200, Alex RAY wrote:
On Fri, 12 Mar 2010 15:13:34 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
On Sat, 13 Mar 2010 16:55:58 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
On Sat, Mar 13, 2010 at 11:12:05PM +0200, Alex RAY wrote:
On Fri, 12 Mar 2010 15:13:34 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
I thought that your opinion was right and if mem is
On Fri, 12 Mar 2010 15:13:34 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
I thought that your opinion was right and if mem is
0xf400-0xf4003fff (16 Kb) I thought the device has 4 cores. However
it looks this was wrong according to the below document:
On Sat, Mar 13, 2010 at 11:12:05PM +0200, Alex RAY wrote:
On Fri, 12 Mar 2010 15:13:34 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
I thought that your opinion was right and if mem is
0xf400-0xf4003fff (16 Kb) I thought the device has 4 cores. However
it looks this was
In message: 261c29701003040928h7aa70b3fm37611f974e0b9...@mail.gmail.com
Miki miki@gmail.com writes:
: Rising FIRMWARE_MAX from 30 to 60 did the trick ! thanks !
: Are there any reasons to have such a low default value ?
I thought I'd committed this change already :)
Warner
2010/3/3 John Baldwin j...@freebsd.org:
On Tuesday 02 March 2010 2:08:55 pm Miki wrote:
2010/3/1 Weongyo Jeong weongyo.je...@gmail.com:
On Sun, Feb 28, 2010 at 08:45:32PM +0100, Miki wrote:
Hi,
Thanks for the work !
I have some problems here when I try to create a wlan interface :
On Thursday 04 March 2010 12:28:59 pm Miki wrote:
2010/3/3 John Baldwin j...@freebsd.org:
On Tuesday 02 March 2010 2:08:55 pm Miki wrote:
2010/3/1 Weongyo Jeong weongyo.je...@gmail.com:
On Sun, Feb 28, 2010 at 08:45:32PM +0100, Miki wrote:
Hi,
Thanks for the work !
I have
On Mon, Mar 01, 2010 at 10:32:40AM +0200, Alexandr Rybalko wrote:
On Sun, 28 Feb 2010 01:52:59 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
On Sat, Feb 27, 2010 at 01:15:35AM +0200, Alex RAY wrote:
Hi Weongyo,
Can new siba release operate in systems like in this SVG image?
On Wed, 3 Mar 2010 00:28:33 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
On Mon, Mar 01, 2010 at 10:32:40AM +0200, Alexandr Rybalko wrote:
On Sun, 28 Feb 2010 01:52:59 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
Can You test your driver without siba_switchcore, I see the
On Tuesday 02 March 2010 2:08:55 pm Miki wrote:
2010/3/1 Weongyo Jeong weongyo.je...@gmail.com:
On Sun, Feb 28, 2010 at 08:45:32PM +0100, Miki wrote:
Hi,
Thanks for the work !
I have some problems here when I try to create a wlan interface :
bwn_v4_ucode5: could not load firmware
On Tue, Mar 02, 2010 at 07:57:26PM +0100, Gustau P?rez wrote:
En/na John Baldwin ha escrit:
On Monday 01 March 2010 3:22:34 pm Gustau P?rez wrote:
En/na Weongyo Jeong ha escrit:
On Fri, Feb 26, 2010 at 04:21:06PM -0800, Xin LI wrote:
Hi, Weongyo,
On
On Monday 01 March 2010 3:22:34 pm Gustau Pérez wrote:
En/na Weongyo Jeong ha escrit:
On Fri, Feb 26, 2010 at 04:21:06PM -0800, Xin LI wrote:
Hi, Weongyo,
On 2010/02/25 16:51, Weongyo Jeong wrote:
FYI bwn(4) driver is committed into FreeBSD tree. I think the driver
En/na John Baldwin ha escrit:
On Monday 01 March 2010 3:22:34 pm Gustau Pérez wrote:
En/na Weongyo Jeong ha escrit:
On Fri, Feb 26, 2010 at 04:21:06PM -0800, Xin LI wrote:
Hi, Weongyo,
On 2010/02/25 16:51, Weongyo Jeong wrote:
FYI bwn(4) driver is
On Sun, 28 Feb 2010 01:52:59 -0800
Weongyo Jeong weongyo.je...@gmail.com wrote:
On Sat, Feb 27, 2010 at 01:15:35AM +0200, Alex RAY wrote:
Hi Weongyo,
Can new siba release operate in systems like in this SVG image?
System example: CPU BCM5836 + Wi-Fi BCM4318
Recent changes of siba(4)
On Sun, Feb 28, 2010 at 11:56:50PM +, Aditya Sarawgi wrote:
On Wed, Dec 23, 2009 at 11:51:34AM -0800, Weongyo Jeong wrote:
On Wed, Dec 23, 2009 at 08:18:48AM +, Aditya Sarawgi wrote:
On Tue, Dec 22, 2009 at 07:53:31PM -0800, Weongyo Jeong wrote:
Hello,
Now bwn(4) is
On Sun, Feb 28, 2010 at 08:45:32PM +0100, Miki wrote:
Hi,
Thanks for the work !
I have some problems here when I try to create a wlan interface :
bwn_v4_ucode5: could not load firmware image, error 2
bwn0: the fw file(bwn_v4_ucode5) not found
Did you try to UP the interface withload
En/na Weongyo Jeong ha escrit:
On Fri, Feb 26, 2010 at 04:21:06PM -0800, Xin LI wrote:
Hi, Weongyo,
On 2010/02/25 16:51, Weongyo Jeong wrote:
FYI bwn(4) driver is committed into FreeBSD tree. I think the driver
supports your LP PHY device. After cvsup please try to rebuild
On Sat, Feb 27, 2010 at 01:15:35AM +0200, Alex RAY wrote:
Hi Weongyo,
Can new siba release operate in systems like in this SVG image?
System example: CPU BCM5836 + Wi-Fi BCM4318
Recent changes of siba(4) by myself doesn't change code flow, layout and
doesn't include enhancements if you're an
On Wed, Dec 23, 2009 at 11:51:34AM -0800, Weongyo Jeong wrote:
On Wed, Dec 23, 2009 at 08:18:48AM +, Aditya Sarawgi wrote:
On Tue, Dec 22, 2009 at 07:53:31PM -0800, Weongyo Jeong wrote:
Hello,
Now bwn(4) is available at the public and waiting test and review. The
status of
Hi,
Thanks for the work !
I have some problems here when I try to create a wlan interface :
bwn_v4_ucode5: could not load firmware image, error 2
bwn0: the fw file(bwn_v4_ucode5) not found
I have installed bwn-firmware-kmod from ports but the only files I have in
/boot/modules are
On Fri, 26 Feb 2010 16:21:06 -0800 Xin LI wrote:
I've asked him to try a
9-CURRENT kernel but the Atom based netbook would take some while to
compile the code =-)
It's very easy/quick to (cross) compile world at a beafy machine
and install the system to an USB stick.
--
WBR, Boris Samorodov
On Fri, Feb 26, 2010 at 04:21:06PM -0800, Xin LI wrote:
Hi, Weongyo,
On 2010/02/25 16:51, Weongyo Jeong wrote:
FYI bwn(4) driver is committed into FreeBSD tree. I think the driver
supports your LP PHY device. After cvsup please try to rebuild siba_bwn
and bwn modules.
Could you
Hi Weongyo,
Can new siba release operate in systems like in this SVG image?
System example: CPU BCM5836 + Wi-Fi BCM4318
And can we compile siba bus code without pci code?
- Cut this to file.svg ---
?xml version=1.0 standalone=no?
svg width=640 height=480
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi, Weongyo,
On 2010/02/25 16:51, Weongyo Jeong wrote:
FYI bwn(4) driver is committed into FreeBSD tree. I think the driver
supports your LP PHY device. After cvsup please try to rebuild siba_bwn
and bwn modules.
Could you please test with
On Wed, Dec 23, 2009 at 08:18:48AM +, Aditya Sarawgi wrote:
On Tue, Dec 22, 2009 at 07:53:31PM -0800, Weongyo Jeong wrote:
Hello,
Now bwn(4) is available at the public and waiting test and review. The
status of this driver is *alpha* so could make panics, warnings and
errors.
55 matches
Mail list logo