Hi,
i've updated one of my systems (a fujitsu-siemens series C) laptop
to the current from yesterday, and my dfe-650 10/100 ethernet pcmcia
card started to behave strangely:
it is detected by the kernel and pccardd correctly as an ed0 device,
ifconfig configures it correctly, but as soon as the
it is detected by the kernel and pccardd correctly as an ed0 device,
ifconfig configures it correctly, but as soon as the interface
is up, the kernel starts spewing ed0: device timeout...
This usually means IRQ stuffups.
at first i suspected cable/hardware problem, and rebooted in windows98SE
On Tue, Nov 07, 2000 at 12:19:40PM +0100, Rogier R. Mulhuijzen wrote:
it is detected by the kernel and pccardd correctly as an ed0 device,
ifconfig configures it correctly, but as soon as the interface
is up, the kernel starts spewing ed0: device timeout...
This usually means IRQ
In message [EMAIL PROTECTED] "Rogier R. Mulhuijzen"
writes:
: Reboot again, and see which IRQ the driver there uses. Then go into
: /etc/pccard.conf and replace the ? on the config line with that IRQ.
Strike that. Don't replace the ? on the config line.
Since we have
