# [EMAIL PROTECTED] / 2003-05-16 15:30:01 +0300:
> > > On Sun, Apr 27, 2003 at 02:48:12PM +0200, Roman Neuhauser wrote:
> > > > # [EMAIL PROTECTED] / 2003-04-26 14:53:36 +0300:
> > > > > On Fri, Apr 25, 2003 at 08:44:00PM +0200, Roman Neuhauser wrote:
> > > > > > Try the following makefile: it work
yeah, I would like to implement it in scsi_target driver. I am using scsi HBA in
target to emulate as a sequential device. My userland application needs to be notified
of some events taking place in scsi_target driver.
Could you pls suggest me the best approach for this??
Thanks,
Jaya
Valen
Having got a new machine here a few days ago, an Intel ICH D865 PERL
board based Pentium IV machine, with an on-board Intel EtherExpress
Pro 100 VE, it failed to detect the network adapter.
Seeing that it is an EtherExpress Pro 100, I though the fxp module
should work with it, and found out that t
On Thu, 12 Jun 2003 14:14:53 +0300
Tom Alsberg <[EMAIL PROTECTED]> wrote:
> Having got a new machine here a few days ago, an Intel ICH D865 PERL
> board based Pentium IV machine, with an on-board Intel EtherExpress
> Pro 100 VE, it failed to detect the network adapter.
>
> Seeing that it is an Et
Tom Alsberg wrote:
> Having got a new machine here a few days ago, an Intel ICH D865 PERL
> board based Pentium IV machine, with an on-board Intel EtherExpress
> Pro 100 VE, it failed to detect the network adapter.
>
> Seeing that it is an EtherExpress Pro 100, I though the fxp module
> should wor
fyi!!!
- Original Message -
From: "Kai Mosebach" <[EMAIL PROTECTED]>
Newsgroups: gmane.comp.db.sapdb.sources
Sent: Saturday, May 31, 2003 1:47 AM
Subject: SAPDB FreeBSD Port Anouncement
> Dear all,
>
> I am pleased to announce the first working binary preview of the SAPDB
> 7.4.
'K, I'm curious here ... is this a native port, or a linux port? the
liblinuxthread.* mention here makes me think its more a linux binary
running on a FreeBSD machine, but just want to clarify ...
On Thu, 12 Jun 2003, Pranas Baliuka wrote:
> fyi!!!
> - Original Message -
> From
Hi, guys,
I want to hack my com interface to specail purpose. I want to use the
Modem Status Register. When the high 4 bits change, it could spring an
interrupt. So, I set the Intertupt Enable Register(in sioattach fuction) to
the interrupt, which support changing in the state of the modem inpu
On Sun, 8 Jun 2003, Bernd Walter wrote:
> But there is lot of sample code available.
Thanks I'll take a look at that.
> You must be doing something wrong - the values are 16bit only.
Ooops...quite right. My mistake.
> If you have no /dev/ugen?.? then the device has no other endpoints in
> it
On Thu, Jun 12, 2003 at 11:30:28PM +1000, Andrew wrote:
> On Sun, 8 Jun 2003, Bernd Walter wrote:
> > If you have no /dev/ugen?.? then the device has no other endpoints in
> > its current configuration.
> > The usbctl tool mentioned above is good to check devices about their
> > capabilities.
>
>
On Thu, 12 Jun 2003, Bernd Walter wrote:
> Not all endpoints have to be available in the current configuration.
> If you show me the output for your device I can tell you what is
> available under which condition.
Thanks, output below.
Andrew
--
DEVICE addr 2
DEVICE descriptor:
bLength=18 bD
On Thu, Jun 12, 2003 at 11:47:55PM +1000, Andrew wrote:
>
>
> On Thu, 12 Jun 2003, Bernd Walter wrote:
>
> > Not all endpoints have to be available in the current configuration.
> > If you show me the output for your device I can tell you what is
> > available under which condition.
>
> Thanks,
This is the onboard ethernet on my dell inspiron 8500 laptop and I
wondered when drivers might get to freebsd. The linux kernel just
imported the drivers that the broadcom wrote for it found:
http://www.broadcom.com/docs/driver-download.html
It doesn't appear they intend to make any freebsd driver
I am in the process of rewriting this driver for FreeBSD. It can transmit,
but RX is not yet going properly. As this is evening work, it's likely to
take at elast another week.
> This is the onboard ethernet on my dell inspiron 8500 laptop and I
> wondered when drivers might get to freebsd. The
Hello,
If you have external midi hardware and Sounblaster 5.1 or a
cmi soundcard, I would appreciate it if you help test out my new midi
and sequencer implementation.
http://www.cnd.mcgill.ca/~mat/midi2-jun1303.tgz
I'm looking for .mid's that jam it up or sound wrong.
Hi
I wish to teach FreeBSD (5.0-CURRENT, somewhere in mid-may, last cvsup
was week ago) make use of that fancy S/P-DIF connector on my Yamaha
soundcard. OTOH, I want to implement it in a Right Way (tm), so that one
can choose, whether he wish to use or not to use this feature, if it's
present. Whic
16 matches
Mail list logo