I use tip com1 to go out serial to serial of other server's redirected
console.
Just check /etc/remote and make sure you have a line as follows:
sio0|com1:dv=/dev/cuaa0:br#9600:pa=none:
But if you do serious console redirection, get a decent Terminal Server
to which you ssh to the Termin
On Monday, 30 August 2004 at 14:11:49 -0400, Rob Deker wrote:
>
> Stephan Uphoff wrote:
>
>> Are you sure that your serial line is configured with the right
>> baud rate?
>
> This may seem a stupid question, but how do I set the baudrate on
> the port and in gdb?
The default bit rate is 9600 bps.
Autofs has been integrated into FreeBSD 6.
There is also a standalone tarball that will compile and run on
FreeBSD 5 as well as FreeBSD 4.
The most recent one is available here:
http://people.freebsd.org/~alfred/sources/autofs/
If you want to get an idea on how to use it, see the libautofs.3
ma
On Wednesday, 8 September 2004 at 11:01:33 -0700, Jerry Toung wrote:
> Good morning Greg,
> I am trying to debug a kld that I wrote that keeps causing panics. I already
> did a search on the mailing list, and the only useful info I got was an email
> you replied to in 1999, "Re: debugging a panic
On Tue, Sep 07, 2004 at 06:27:14PM -0700, Pascal Hofstee wrote:
> On Mon, 6 Sep 2004 15:12:08 -0700, Pascal Hofstee <[EMAIL PROTECTED]> wrote:
> > After a few hours of digging through both the glib-2 as well as the
> > beep-media-player sources i finally managed to figure out why
> > beep-media-pla
On Wed, Sep 08, 2004 at 05:43:36PM +0100, Soo-Hyun Choi wrote:
> These variables are used to calculate the TCP RTO. But why do they
> have the two different version of variables?
There are two different variables because they store different
things. One measures the average of the round trip time
I take it you've read the Handbook regarding serial console access?
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/serialconsole-setup.html
http://www.freebsd.org/doc/en_US.ISO8859-1/articles/console-server/freebsd.html
On Wed, 8 Sep 2004 09:52:38 -0500, Bob Willcox <[EMAIL PROTECTED]
On Wed, Sep 08, 2004 at 11:37:07AM -0600, M. Warner Losh wrote:
> Peter,
>
> thanks again for the excellent anaylsis of the problem. I introduced
> this when I cleaned up the load a driver will now cause usb to attach
> a device case. You are correct as far as I can tell and can test.
> Here's t
Peter,
thanks again for the excellent anaylsis of the problem. I introduced
this when I cleaned up the load a driver will now cause usb to attach
a device case. You are correct as far as I can tell and can test.
Here's the patch that I've come up with. Does it work for you?
Warner
? P
? PP
Ind
On Wed, Sep 08, 2004 at 11:17:06AM -0600, M. Warner Losh wrote:
> [[ redirected to hackers only ]]
Thanks for looking over this so quickly!
> In message: <[EMAIL PROTECTED]>
> Peter Pentchev <[EMAIL PROTECTED]> writes:
[snip]
> : So here's a How to Panic a RELENG_5 Kernel In Five Easy
[[ redirected to hackers only ]]
In message: <[EMAIL PROTECTED]>
Peter Pentchev <[EMAIL PROTECTED]> writes:
: A couple of days ago I started experimenting with a new USB device,
: which has no FreeBSD driver, and within the first minute of playing with
: it, my kernel panicked - someth
Hi,
I'm not sure if this list is appropriate to ask about the FreeBSD kernel
source or not. If not, could somebody direct me in an appropriate
list?
My curiosity is if we see the tcp.cc code inside, there are two
different version of srtt (smoothed rtt) and rttvar (smoothed mean
deviation estimat
Hi,
A couple of days ago I started experimenting with a new USB device,
which has no FreeBSD driver, and within the first minute of playing with
it, my kernel panicked - something that I hadn't seen for about a month,
even with 5.x :)
So here's a How to Panic a RELENG_5 Kernel In Five Easy Steps
[I apologize for this somewhat off-topic post, but it seemed that
someone on this list may have already done this.]
I just acquired a Shiva LanRover/4E terminal server and was wanting
to use it to connect to several of my FreeBSD systems serial ports
for console access to them. I was able to get t
"Murray Stokely" writes:
> > I'm working on updating our advocacy material used on the website, in
> > the Handbook, and now in a set of generic slides that can be used or
> > adapted for presentations.
> >
> > If you have ideas about cool new functionality that we should do a
> > better job of t
I'm trying to do kernel profiling with kernbb(8) and gcov(1), but
I can't get the kernel compile to accept the -ftest-coverage and
-fprofile-arcs options.
(1) Is it --test-coverage or -ftest-coverage, or does it matter?
kernbb(8) says the former, gcov(1) says the latter.
(2) How do I add these op
I'm trying to get a USB2 DVD writer working with growisofs under
4.10-STABLE (updated yesterday 6-Sep-04), but am having problems - the
burn (on a DVD+R) always fails with an I/O Error anywhere between 10M
and 1.5Gbytes.
I can read from the unit, and short burns seem OK. There seems to be
som
17 matches
Mail list logo
