, this is what you want.
Regards,
-Les
--
Les Biffle
CISSP Information Systems Security Consultant
(480) 585-4099 [EMAIL PROTECTED] http://www.les.biffle.org/
Network Safety, PO Box 14461, Scottsdale, AZ 85267
___
[EMAIL PROTECTED
turned out to be generated by the stack at the other
end (gratuitous back-to-back ACKs and packet retransmission before any
possible timeout could occur).
For us, a waste of time. If you have more interesting results, please
let me know. I figured it would be a great tool.
-Les
--
Les Biffle
Oh, My dongle is on -current.
Is that 3-Current? I'm ready to cvsup to it, if it feels solid to you.
We've a production product that has been rock-solid on 3.5-stable, and
I don't want to join the ranks of the flaky product providers just to
get USB serial support.
-Les
--
Les Biffle
CISSP
for console and one for our dongle, and wondered if there was stable
USB serial adaptor support in 3.5? Would my dongle code (that assumes
a normal serial port) have trouble accessing a serial dongle by way
of USB?
TIA,
-Les
--
Les Biffle
CISSP Information Systems Security Consultant
? Please?
-Les
--
Les Biffle
(480) 585-4099[EMAIL PROTECTED] http://www.les.safety.net/
Network Safety Corp., 5831 E. Dynamite Blvd., Cave Creek, AZ 85331
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body of the message
certainly
done that before, but would prefer something more vanilla.
Thanks,
-Les
--
Les Biffle
(480) 585-4099[EMAIL PROTECTED] http://www.les.safety.net/
Network Safety Corp., 5831 E. Dynamite Blvd., Cave Creek, AZ 85331
To Unsubscribe: send mail to [EMAIL PROTECTED
website, he gives examples of using MRTG to do this. Whether
healthd can talk to your mobo chipset is another matter.
Regards,
-Les
--
Les Biffle
(480) 585-4099[EMAIL PROTECTED] http://www.les.safety.net/
Network Safety Corp., 5831 E. Dynamite Blvd., Cave Creek, AZ 85331
have a stratum 1
quality time reference.
Regards,
-Les
--
Les Biffle
(480) 585-4099[EMAIL PROTECTED] http://www.les.safety.net/
Network Safety Corp., 5831 E. Dynamite Blvd., Cave Creek, AZ 85331
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers
pkt.ipbit.ip_sum=in_cksum((unsigned short*)(void*)pkt,20);
pkt.tcpbit.th_sum=tcpsum(pkt.ipbit);
You need to do the TCP checksum first. It changes the payload (the TCP
checksum). The IP checksum includes all data, so must be done after the
payload changes are done.
-Les
--
Les
never been an operator =+, even checking back to the BCPL days.
So, read the code carefully to see if you can figure out if they
meant +=
Regards,
-Les
--
Les BiffleCommunity Service... Just Say NO!
(480) 585-4099[EMAIL PROTECTED] http://www.les.safety.net/
Network Safety Corp
boot, but I'm concerned that
the behavior is different on different platforms. I really hate mysterious
platform differences.
Thanks,
-Les
--
Les BiffleCommunity Service... Just Say NO!
(480) 585-4099[EMAIL PROTECTED] http://www.les.safety.net/
Network Safety Corp., 5831 E
Rebooting...
and then we go right into the next boot. At present, one of the machines
shows all the detail from 2.75 reboots.
How and why is it doing this, and how do I make it stop?
Thanks in advance,
-Les
--
Les Biffle Community Service... Just Say NO!
(480) 778-0177[EMAIL
). It does Cisco HDLC, Frame Relay (100 PVCs) and Sync PPP.
Good luck,
-Les
--
Les Biffle Community Service... Just Say NO!
(480) 778-0177[EMAIL PROTECTED] http://www.networksafety.com/
Network Safety, 7802 E Gray Rd Ste 500, Scottsdale, AZ 85260
To Unsubscribe: send mail to [EMAIL
he daemons are
dynamically-linked. Is there anything I can do to reduce the memory
footprint?
Thanks and best regards,
-Les
--
Les Biffle Community Service... Just Say NO!
(480) 778-0177[EMAIL PROTECTED] http://www.networksafety.com/
Network Safety, 7802 E Gray Rd Ste 500, Scottsdale
to install an arp
entry in your route table for this made-up address. That will keep
you from ARPing for 208.59.162.1 and discovering the device that
really owns that address.
5. Set your default gateway to 208.59.162.1.
Good luck,
-Les
--
Les Biffle Community Service... Just Sa
, which list pinouts, various electrical specs,
and some theory, but it's no programmer reference.
Thanks,
-Les
--
Les BiffleCommunity Service... Just Say NO!
(480) 778-0177[EMAIL PROTECTED] http://www.les.safety.net/
Network Safety, 7802 E Gray Rd Ste 500, Scottsdale, AZ 85260
rt on this once upon a time. They're sending a different M/B and riser
for us to try.
Regards,
-Les
--
Les BiffleCommunity Service... Just Say NO!
(480) 778-0177[EMAIL PROTECTED] http://www.les.safety.net/
Network Safety, 7802 E Gray Rd Ste 500, Scottsdale, AZ 85260
To Un
uct platforms,
because our product won't get through the BIOS PCI scan with these
"features" enabled.
Can somebody help us here? We're in a bit of a panic.
Best regards,
-Les
--
Les BiffleCommunity Service... Just Say NO!
(480) 778-0177[EMAIL PROTECTED] http://w
18 matches
Mail list logo