Under 3.3R does anyone have this chip working? I get the following dmesg info: lnc1: <PCNet/PCI Ethernet adapter> rev 0x36 int a irq 10 on pci0.5.0 lnc1: PCnet-FAST+ address 00:d0:12:01:04:53 Interestingly no PHY information.. ifconfig says: # ifconfig lnc1 lnc1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 207.76.205.82 netmask 0xffffff00 broadcast 207.76.205.255 ether 00:d0:12:01:04:53 however I get: # ping 207.76.205.22 PING 207.76.205.l22 (207.76.205.2n2): 56 data bytecs 1: Transmit underflow error -- Resetting lnc1: Transmit underflow error -- Resetting lnc1: Transmit underflow error -- Resetting lnc1: Transmit underflow error -- Resetting ^C --- 207.76.205.22 ping statistics --- 4 packets transmitted, 0 packets received, 100% packet loss netstat -in shows: # netstat -in Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll lnc1 1500 <Link> 00.d0.12.01.04.53 4809 0 17 4 0 lnc1 1500 207.76.205 207.76.205.82 4809 0 17 4 0 The chip on the card is an AM79C972 and the PHY is (If the one with PHY written on it is the one), an Am79C873KC. The card has home-PNA on it as well so it's posible the PHY might belong to that. Looking at the AMD specs that must be the PHY. The "underflow" messages suggest a DMA/Data transfer problem, does anyone have any suggestions/experience? If I getthe time I'l hve a read of the driver too. julian To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-hackers" in the body of the message