RC Efficiency: 683.40m
Actual Hit Ratio: 71.09% 485.82m
~ 800GB test data, all served from cache.
If you are considering Fusion-I/O, the FreeBSD driver is generally not
released to the general public
tion and I am OK with 9.0 for now, while 9.1 is still RC.
>
> Thanks
> Irek.
>
The mpt driver in 9.0 ignores a bit in the PCI ID and decides it should
attach to the megaraid when it shouldn't. This was fixed in 9.1.
You can make 9.0 wor
org"
ipmi stopped working as a loader preload in 9.x for some reason, but
the workaround is to remove ipmi_load="YES" from /boot/loader.conf and
add it to kld_list in /etc/rc.conf
- --
Thanks,
Josh Paetzel
-BEGIN PGP SIGNATURE-
Version: GnuPG v2
An adaptec 2940 isn't a U160 controller.
The adaptec 19160/29160/39160 are, but I haven't used them since FreeBSD 4.x.
No idea if they still work.
Thanks,
Josh Paetzel
> On Jun 26, 2015, at 10:54 PM, Bernt Hansson wrote:
>
>> On 2012-05-24 01:02, vermaden wrote:
>
On 07/28/2015 13:40, Willem Jan Withagen wrote:
> On 28/07/2015 19:48, Mike Tancsa wrote:
>> On 7/28/2015 1:16 PM, Willem Jan Withagen wrote:
>>> Hi,
>>>
>>> Are these what I think they are?
>>> Errors in the CPU L2 cache?
>>>
>>> Are the ECC corrected?
>>> Or is error really "data kaput"?
>>>
>>
UP#List_MBD
shows a bunch of different PCI and SAS/SATA port and memory
configurations. Something in the X10SR family should work well for you.
That's the "less than half the power draw" option. You can go with
something that has 1/4 the power draw of your current setup, but it will
li
ronments (they have a superior queuing
implementation) it's not worth considering when the real solution is
SSDs.
My recommendation is if you have SAS expanders and an HBA use SAS
drives. If you have direct wired SAS or a RAID controller you can use
either SAS or SATA. If your application dem
blowing fifty bucks on a simple, low-end ethernet card,
> but everything inexpensive seems to be Realtek-based. :-(
> ___
> freebsd-hardware@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "fre
mfi(4) doesn't support the 9341, however mrsas(4) does.
Is the snippet of dmesg you pasted after you added hwmfi.mrsas_enable="1" to
/boot/device.hints?
If so perhaps that isn't just a typo in your email, but rather a typo in your
device.hints
The c
r.
And yes, FreeBSD mptutil doesn't have the ability to erase the flash, which you
need to be able to do to go from IR to IT. DOS is the typical answer for that.
--
Thanks,
Josh Paetzel
___
freebsd-hardware@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "freebsd-hardware-unsubscr...@freebsd.org"
A full dmesg would be useful. A dmesg from a verbose boot even more useful.
As well as the make and model of the motherboard.
The most common problem is the controller the drive is plugged into isn't
actually capable of SATA 3.
--
Thanks,
Josh Paetzel
__
boot the install media; see if it shows up during
> the probe.)
>
> --
> Karl Denninger
> k...@denninger.net <mailto:k...@denninger.net>
> /The Market Ticker/
> /[S/MIME encrypted email preferred]/
That card works on FreeBSD. I have personal experience with it. However
fl
On Tue, Sep 3, 2019, at 8:13 AM, Ireneusz Pluta/wp.pl wrote:
> W dniu 2019-09-03 o 01:25, Josh Paetzel pisze:
>> The closest you can get to pass through is a bunch of single drive RAID 0
>> disks with the caching disabled.
> The 9280-16i4e supports JBOD mode.
>
rds all there is are media server boards
with no BMC, 1 SODIMM slot, two SATA ports, and a single PCI-e slot.
You’ll need to step up to something like a SM X11SPA which is a lot of board to
get what you want.
Supposedly the ARM ecosystem was going to
14 matches
Mail list logo