Say me, please, how I can transfer between servers ZFS-partitions larger than
20Gb.
I have 4 partitions with backup data. There are a lot of small pictures.
NAME USED AVAIL REFER MOUNTPOINT
tank2 1,42T 1,32T 118M legacy
...
--- Original message ---
From: "Cristiano Deana"
Date: 16 July 2014, 18:32:44
> Hi all,
>
> I'm gonna setup a Dell 1955 to use as router. Dual xeon dual core,
> with these network cards:
>
> # pciconf -lv | grep -B2 network
> vendor = 'Broadcom Corporation'
> device = 'NetXtreme II B
--
Vladislav V. Prodan
System & Network Administrator
support.od.ua
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
--- Original message ---
From: "Vladislav Prodan"
Date: 27 June 2014, 16:28:41
>
> Hello!
>
> and sends to gmail (dualstack – ipv4 and ipv6) through ipv4!
>
To gmail:
Return-Path:
Received: from [10.0.0.10] (otrada.od.ua. [89.209.81.54])
by mx.g
Hello!
My sendmail+tls+sasl2-8.14.9 can’t send mail to ipv4 only post hosts, and sends
to gmail (dualstack – ipv4 and ipv6) through ipv4!
- Transcript of session follows -
553 5.3.5 mxs.mail.ru. config error: mail loops back to me (MX problem?)
554 5.3.5 Local configuration error
553
>
> Another note related to Q-in-Q.
>
>
> You would probably be better of creating standard vlans for the first vlan
> layer and use ng_vlan for the second++ part of the Q-in-Q on top of the first
> ones.
> This also give better usability and will speedup a bit your times.
>
>
>
So I i
> On Wed, 9 Apr 2014, Vladislav Prodan wrote:
>
> VP>b) Service bsnmpd started at 12K interfaces, but immediately loaded CPU
> VP>at 80-100%
>
> I could imagine that this is because of the statistics polling. bsnmp
> implements 64-bit interface statistics but we
Dear Colleagues!
I had a task, using FreeBSD 10.0-STABLE:
1) Receive 20-30 Q-in-Q VLAN (IEEE 802.1ad ), inside of which 2k-4k vlan (IEEE
802.1Q). Total ~60K vlan
2) To every vlan interface assign ipv4 and ipv6 addresses, define routes to
ipv4 and ipv6 addresses on another side of vlan (ip unnum
Dear Colleagues!
I had a task, using FreeBSD 10.0-STABLE:
1) Receive 20-30 Q-in-Q VLAN (IEEE 802.1ad ), inside of which 2k-4k vlan (IEEE
802.1Q). Total ~60K vlan
2) To every vlan interface assign ipv4 and ipv6 addresses, define routes to
ipv4 and ipv6 addresses on another side of vlan (ip unnumb
FreeBSD 8.2-STABLE
quagga-0.99.21 Free RIPv1, RIPv2, OSPFv2, BGP4, IS-IS route software
BGP.as1(config-router)# neighbor XXX.XXX.YYY.YYY password testtest
% Error while applying TCP-Sig to session(s)
No one to share the patch with the Linux version of quagga, so get to work
option pass
> On Wednesday March 20 2013 01:54:03 Vladislav Prodan wrote:
> > Prompt please what or how to implement NAT64 on Freebsd?
>
> The quickest options that I see is to fire up a VirtualBox
> under FreeBSD and install a guest OS there that can do the job,
> like OpenBSD 5.2
Prompt please what or how to implement NAT64 on Freebsd?
--
Vladislav V. Prodan
System & Network Administrator
http://support.od.ua
+380 67 4584408, +380 99 4060508
VVP88-RIPE
___
freebsd-net@freebsd.org mailing list
http://lis
> On 12 Mar 2013, at 21:06, "Vladislav Prodan" wrote:
>
> > lo0: flags=8049 metric 0 mtu 16384
> >options=3
> >inet 127.0.0.1 netmask 0xff00
> >inet6 ::1 prefixlen 128
> >inet6 fe80::1%lo0 prefixlen 64 s
I have a FreeBSD 8.2-STABLE amd64.
Network:
vlan300: flags=8843 metric 0 mtu 1500
description: Uplink_1
inet
inet6
vlan400: flags=8843 metric 0 mtu 1500
description: Uplink_2
inet
inet6
vlan100: flags=8843 metric 0 mtu 1500
descripti
I have worked with options driver alc:
ifconfig_alc0="inet 10.1.0.18/24 -tso media 100baseTX mediaopt full-duplex up"
vlans_alc0="255"
ifconfig_alc0_255="inet ZZZ.YYY.XXX.247/24"
--- Исходное сообщение ---
От кого: "Nikolay Nevzorov"
Кому: yong...@freebsd.org
Дата: 20 октября 2012, 16:07
15 matches
Mail list logo