Hi list,
A late followup on this issue. Due to physical location constraints
and production environment, I finally have the chance to relook into
this issue. I'm planning to perform these actions tomorrow:-
1. Apply Doug's IPMI patches from
http://www.ambrisko.com/doug/bge_ipmi.patch (actually t
2006/11/6, Senandung Mendonan <[EMAIL PROTECTED]>:
Hi David / list,
Just to drop a note that this situation still persists, even with the
latest 6.2-BETA3. I have issued a pr. In addition, I'm willing to send
you (or anyone in the list) the NIC in question for troubleshooting.
Would very much
Hi David / list,
Just to drop a note that this situation still persists, even with the
latest 6.2-BETA3. I have issued a pr. In addition, I'm willing to send
you (or anyone in the list) the NIC in question for troubleshooting.
Would very much welcome a helping hand..
Thanks... :)
On 10/12/06,
David / list,
Some new developments/leads on this issue:-
On 8/21/06, Senandung Mendonan <[EMAIL PROTECTED]> wrote:
> If you could attach a dump of dmesg that shows the messages from the
> driver that might help too.
Here's the dmesg for the dual-port version:-
pci5: on pcib4
bge0: mem
0xd
David,
On 8/19/06, David Christensen <[EMAIL PROTECTED]> wrote:
> I tried to use a FE version of the switch (Cisco Catalyst
> C3750), and a
> single-port version of the said NIC, with the same results
> (auto detect
> fails, and can only live with intermittent forced 100baseTX
> full-duplex).
> Dear list,
> I'm running the latest FreeBSD 6.1-RELEASE-p3 on the
> following piece of
> hardware:-
> IBM xSeries 336
> - 1 add-on PCI dual-port NIC (IBM Netxtreme Dualpt Ethernet adapter)
> matching the Broadcom BCM5704C Dual Gigabit Ethernet chipset (detected
> as bge0 and bge1)
> - 2 intern