Hi,
> I wasn't there when the panic happened, I just noticed the load average
> was increasing (with polling disabled); and it kept increasing until the
> machine become unresponsive. After 1-2 minutes I observed it had
> rebooted itself.
>
> Now I have polling enabled on it, I have kernel.id
> "Mike" == Mike Jakubik <[EMAIL PROTECTED]> writes:
[about packet-per-second performance]
Mike> Post the message enough times? Have you tried on a PCI Express
Mike> bus?
Well... I kept getting the message that it wasn't from my subscribed
address --- which in the past had ment that it just
David Gilbert wrote:
"Mihai" == Mihai Tanasescu <[EMAIL PROTECTED]> writes:
Mihai> Hello, I'm running the following setup:
Mihai> Freebsd Dual Xeon 3Ghz machine (SMP enabled)
Mihai> 3 x 100 Mbits/s links (used at 80% capacity) - 3 x Intel 100
Mihai> fxp
Mihai> 1 x 1000 Gbit link
> "Mihai" == Mihai Tanasescu <[EMAIL PROTECTED]> writes:
Mihai> Hello, I'm running the following setup:
Mihai> Freebsd Dual Xeon 3Ghz machine (SMP enabled)
Mihai> 3 x 100 Mbits/s links (used at 80% capacity) - 3 x Intel 100
Mihai> fxp
Mihai> 1 x 1000 Gbit link to a cisco router (transfers d
> "Mihai" == Mihai Tanasescu <[EMAIL PROTECTED]> writes:
Mihai> Hello, I'm running the following setup:
Mihai> Freebsd Dual Xeon 3Ghz machine (SMP enabled)
Mihai> 3 x 100 Mbits/s links (used at 80% capacity) - 3 x Intel 100
Mihai> fxp
Mihai> 1 x 1000 Gbit link to a cisco router (transfers d
> "Mihai" == Mihai Tanasescu <[EMAIL PROTECTED]> writes:
Mihai> Hello, I'm running the following setup:
Mihai> Freebsd Dual Xeon 3Ghz machine (SMP enabled)
Mihai> 3 x 100 Mbits/s links (used at 80% capacity) - 3 x Intel 100
Mihai> fxp
Mihai> 1 x 1000 Gbit link to a cisco router (transfers d
On Monday 26 December 2005 19:22, Mihai Tanasescu wrote:
>
> 3 x 100 Mbits/s links (used at 80% capacity) - 3 x Intel 100 fxp
>
> 1 x 1000 Gbit link to a cisco router (transfers downstream the other 3
> links) - 1 x Intel em
>
>
> I'm getting something arround 100k pkt/sec input and 100k pkt/sec
Hello,
Sorry for omitting the esential details about my system.
You can find my dmesg at:
http://pastebin.com/479977
I'm running:
FreeBSD 6.0-RELEASE-p1
Here is my kernel configuration:
http://pastebin.com/479981
I wasn't there when the panic happened, I just noticed the load average
was
Mihai Tanasescu wrote:
The problem:
If I ping this machine or anything that is routed through it I get
response times of 10-15-30 ms and once in 30 seconds a packet is lost.
If I disable kernel.polling.enable then I get response times of 1-2-3
ms but I also get a lot of interrupts and a kerne
Hello,
I'm running the following setup:
Freebsd Dual Xeon 3Ghz machine (SMP enabled)
3 x 100 Mbits/s links (used at 80% capacity) - 3 x Intel 100 fxp
1 x 1000 Gbit link to a cisco router (transfers downstream the other 3
links) - 1 x Intel em
I'm getting something arround 100k pkt/se
10 matches
Mail list logo
