- Original Message -
From: "Sean Chittenden" <[EMAIL PROTECTED]>
You can *never* rely on, or use auto negotiation. Its very common to
have the switch be set to auto, the PC to be set to 100 FDX, and have
the switch settle on 100 half-duplex (Cisco switches in particular).
netstat -i wi
> after digging deeper it found out that the whole em0 driver worth
> nothing... when i set the media to auto it's operating in half
> duplex (i found out after a couple of benchmarks with iperf), when i
> set it to 100basetx and full duplex manually the result is worse...
> any idea?
Explicitly
ginal Message -
From: "OxY" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, December 28, 2005 9:22 AM
Subject: em0 and tunnel performance problem
hi!
i have an intel etherexpress gigabit card on 100mbit port and fbsd
6.0-p1..
my box is a proxy, it's traffic is 100/100mbit
hi!
i have an intel etherexpress gigabit card on 100mbit port and fbsd 6.0-p1..
my box is a proxy, it's traffic is 100/100mbit constant..
unfortunately i have to use tunnel and that is the source of my problem.
when i enable the tunnel and the packages are going through it the
performance is poo
