err, yep, and it only displays 'system booting' when the nas is running.
I understood from their forums that the only way to have it working is to
keep their FW.
but, just take a look at their linux booting. I didn't even try their
management interface.
If I've some time to waste, I'll investiga
On Wed, 29 Sep 2010 22:44:53 +0200
Samuel Martín Moro wrote:
> Hi,
>
>
> I'm trying to replace my (dying) gateway with a qnap ts-509 (1G DDR,
> celeron m420 1.6Ghzs).
Someway OT but... do you have the LCD display work out from that box!?
Cheers
--
Massimo
___
Oh... good guess...
next time I'll try with a fresh VM...
fa...@alpha ~ : cat /etc/resolv.conf
# Generated by dhcpcd from eth1
nameserver 192.168.0.254
domain faust-network
nameserver 10.242.42.254
# /etc/resolv.conf.tail can replace this line
fa...@alpha ~ : cat /etc/resolv.conf.head
nameserver 1
On 9/29/2010 4:44 PM, Samuel Martín Moro wrote:
Hi,
I'm trying to replace my (dying) gateway with a qnap ts-509 (1G DDR, celeron
m420 1.6Ghzs).
I'm using mfsBSD, based on FreeBSD-RELEASE-8.1 amd64.
It's almost ready (zfs, nfs, dns, pf, ...), I'm checking everything's OK to
swap the gate.
I n
Thanks for your quick answer.
I tried it out, but still have my slow-connect-problem...
I read somewhere (can't remember where...) that my network chip doesn't
support jumbo frames.
So, I thought I had better to disable rfc1323, and adjust send/recv/dgram
values.
Am I right? Am I doing it right?
9, 2010 1:45 PM
> To: freebsd-performance@freebsd.org
> Subject: freebsd router
>
> Hi,
>
>
> I'm trying to replace my (dying) gateway with a qnap ts-509 (1G DDR, celeron
> m420 1.6Ghzs).
> I'm using mfsBSD, based on FreeBSD-RELEASE-8.1 amd64.
> It
Hi,
I'm trying to replace my (dying) gateway with a qnap ts-509 (1G DDR, celeron
m420 1.6Ghzs).
I'm using mfsBSD, based on FreeBSD-RELEASE-8.1 amd64.
It's almost ready (zfs, nfs, dns, pf, ...), I'm checking everything's OK to
swap the gate.
I noticed that opening a new connection to distant or
tvtube blog wrote:
Dear All,
Now a days I getting a Problem with my 4.11 FreeBSD Router with 3 Gigabits
(bge) Broadcom Ethernet Cards, It was working fine and uses to pass more
then 200 Mbits/s Internet Traffic but now a day not passing more then
90Mbits/s. Even All cards are have Giga
sorry I forget to mention that we use this router only for out going traffic
( that is upload ) .. Thanks every one for advice it will try then post it
here.
TheOne Khan
2009/12/27 Bc. Radek Krejca
> Hi,
>
> try polling - man polling
>
>
> --
> S pozdravem,
> Bc. Radek Krejca
> ICQ: 65895541
Dear All,
Now a days I getting a Problem with my 4.11 FreeBSD Router with 3 Gigabits
(bge) Broadcom Ethernet Cards, It was working fine and uses to pass more
then 200 Mbits/s Internet Traffic but now a day not passing more then
90Mbits/s. Even All cards are have Giga Connectivity.
I am using
Mike Tancsa wrote:
While on the topic, has anyone tried
http://www.dlink.com/products/?pid=406
on FreeBSD ?
---Mike
I've seen the marketting literature on the D-Link website for this card
for many months, but I'm having a hard time finding a seller in the
USA (i.e. a significant ma
While on the topic, has anyone tried
http://www.dlink.com/products/?pid=406
on FreeBSD ?
---Mike
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,
12 matches
Mail list logo