Hi,
I am curious if the problem persists if you put the
following in your device.hints using the default kernel.
hint.acpi.0.disabled="1"
Lucio
On 0, Martin Brecher <[EMAIL PROTECTED]> wrote:
:Jaroslaw Nozderko wrote:
:[...]
:>>Yes, see my post from earlier today called "Can't shutdown, logo
On Fri, Jan 02, 2004 at 03:53:30PM -0800, Sal Aldana wrote:
> I was wondering which AMD Processors are compatible with FreeBSD. I have a
> Athlon XP 2700 and wanted to know if it would work. I was also going to
> build a Dual Processor machine using Athlon MP Processors. If any of these
> work c
Hi Everybody ,
I want to learn two things ?!
First,Does bandwith limiting affect high loaded MailServers and Web
Servers?! Because I know if I set bandwith limit I have to set queue at this
moment some queue delay can be occur ?!
I think that mail server can handle it because SMTP will work un
Hi Everybody
I red tunning man and some documents on the Internet . I have same question
to undertanding better
1)in tuning man siad that " Setting vfs.vmiodirenable improve the performans
of sevices that manipulating a large number of file like Web Cache,large
Mail System and News System "
Hi all,
I've had some trouble with booting from the 5.2 ISO I downloaded. Some
background (long-winded, but bear with me):
I downloaded 5.2RC2 disk1 and 5.2RC2 disk2 with Firebird on Red Hat 9.
All
seemed well. I scp'd those files to my Mac (Panther) and created dmg's
and
burned them to a CD. Al
On Sat, Jan 03, 2004 at 08:54:54PM +1100, August Simonelli wrote:
> Hi all,
>
> I've had some trouble with booting from the 5.2 ISO I downloaded. Some
> background (long-winded, but bear with me):
>
> I downloaded 5.2RC2 disk1 and 5.2RC2 disk2 with Firebird on Red Hat 9.
> All
> seemed well. I s
On Fri, Jan 02, 2004 at 09:26:59AM -0800, Eric Rescorla wrote:
> I'm finally getting to the point where my disk capacity massively
> outruns my tape capacity, so I'm thinking of converting to removable
> disk-only backup. I could just use Amanda to backup to disk, but I'm
> intrigued by Plan 9's ar
On Fri, Jan 02, 2004 at 02:55:47PM -0600, Dan Nelson wrote:
> In the last episode (Jan 02), Toomas Aas said:
> > However, when I umount /backup and remove the drive, the da0 device
> > somehow remains active (can be seen with 'camcontrol devlist'). When
> > I then plug in the second drive, it becom
On Fri, Jan 02, 2004 at 07:03:58PM -0800, Mike Maltese wrote:
> > For the kernel configuration you can even optimize the compilation for
> > such processors (5.x only) :
> >
> > options CPU_ATHLON_SSE_HACK
> > options CPU_ENABLE_SSE
>
> These are also valid kernel options for 4.x.
Where are the
Eric F Crist <[EMAIL PROTECTED]> writes:
> On Friday 02 January 2004 02:06 pm, Dru wrote:
>> Is anyone aware of a tutorial/documentation available for creating a
>> hardware profile? I'm thinking of something that allows the user to
>> choose to either configure a wireless or a wired NIC during bo
On Thu, 2004-01-01 at 22:43, Philip M. Gollucci wrote:
> vegeta# cd /usr/share/example/cvsup
> vegeta# cvsup -g -L2 standard-supfile
> vegeta# cd /usr/src/sys/i386/conf
> vegeta# config VEGETA
> vegeta# cd ../compile/VEGETA
> vegeta# make depend
> vegeta# make
I would recommend trying the "officia
Hi!
To clarify up a bit:
Netgear manufactured the FA310, which had 4 revisions.
the first two, IIRC, hat genuine digital chips on it, the last two
revisions hat digital-clones on it, therefore the handling by the dc(4)
driver.
the Netgear Fa311 has a different chipset on it, that is driven by
Olivier Gautherot <[EMAIL PROTECTED]>(by way of Olivier Gautherot\ <[EMAIL
PROTECTED]>) writes:
> I'm facing a funny situation that I don't really understand... I'm currently
> running 5.1 (I thought it was -STABLE but the CDROM says -RELEASE, so I'm not
> completely sure as I have had it for som
getting the following message occasionally.unable to figure it out as
yet.any help would be appreciated.thanks
12-16-2003
12-21-2003
12-30-2003
: hBU6NEbK027111: SYSERR(root): rewrite: excessive recursion (max 50),
ruleset canonify
___
[EM
Hmm. I created a disklabel as such:
8 partitions:
#size offsetfstype [fsize bsize bps/cpg]
a: 104857604.2BSD 2048 16384 8
b: 1572864 1048576 swap
c: 804182400unused0 0
d: 3072 26214404.2BSD 2048 16384 28552
On Sat, Jan 03, 2004 at 10:21:27AM -0500, Dennis M. Yocum wrote:
> : hBU6NEbK027111: SYSERR(root): rewrite: excessive recursion (max 50),
> ruleset canonify
You've got a mail-loop. One part of the message processing is
changing the address in one way, then another part is changing it back
again
Frederick Thomas writes:
> I'm trying to get some help installing the tarball in the subject line
> because I do not have an internet connection at home, and every time I
> have tried to build a binary from source I've have been unable to
> because of some missing dependencies. I'm new to asking f
> > > options CPU_ATHLON_SSE_HACK
> > > options CPU_ENABLE_SSE
> >
> > These are also valid kernel options for 4.x.
>
> Where are these documented?
/usr/src/sys/i386/conf/LINT
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo
IzyData Software Company <[EMAIL PROTECTED]> writes:
> We are IzyData Software Developping company from Switzerland. And
> now, we are going to dedicated server. For our OS we choose FreeBSD
> 4.9. And one problem appeared. We can't make working sata raid disks which are
> on mirroring, we sim
I have a Pentium 4 1.8 Ghz on an ASUS P4S533 motherboard. FreeBSD
5.1 fails to install - it just hangs while probing for devices, and I
left it for
many minutes. There is no ZIP or JAZZ drive; just an IDE disk and
an LG CD-RW drive.
This machine installs and runs FreeBSD 4.7 with no problems, a
Hello,
I am having trouble trying to start the gnumail -port, which I compiled
from a port-tree from 2 week past. I was wondering if I could get help
from here. I am running FreeBSD-5.1-release/i386.
The program starts with a dialog box which has two buttons, but there
isn't any text in them. In t
Hello!
I'm using FreeBSD 4.9 and I want to set up an internet link using pppoe and
dial on demand. On principle it works, but I've a problem with the idle
timer
and packet filtering: I want that outgoing icmp (destination unreachable)
and
tcp (fin/rst) packages do not change the idle timer.
Releva
Vahric MUHTARYAN wrote:
First,Does bandwith limiting affect high loaded MailServers and Web
Servers?! Because I know if I set bandwith limit I have to set queue at this
moment some queue delay can be occur ?!
Bandwidth limiting affects busy network services, certainly. If you want to
adjust the
when I installed freebsd I tried to resize the /dev
partion bigger and It told me it was not possible even
though I had 5GB of free space it only let me to use
preset partition sizes:(
So know my /dev partiotion is too small. and the OS
is installed with KDE as GUI. and my /dev fills to
compasity a
Hello List,
I am having some difficulty in getting my xl0 and xl1 3com cards to work
the way I'd like. I'm running 5.1 Release and I'm basically trying to
have one interface with no IP address(specifying it as such in
/etc/rc.conf as ifconfig_xl1="up") And I'd like to have the other(xl0)
to have
Vahric MUHTARYAN wrote:
1)in tuning man siad that " Setting vfs.vmiodirenable improve the performans
of sevices that manipulating a large number of file like Web Cache,large
Mail System and News System " But I don't agree with it for mail system, or
What type of mail systems can imporved with this
Rogue Spider <[EMAIL PROTECTED]> writes:
> when I installed freebsd I tried to resize the /dev
> partion bigger and It told me it was not possible even
> though I had 5GB of free space it only let me to use
> preset partition sizes:(
> So know my /dev partiotion is too small. and the OS
> is insta
Jaroslaw Nozderko wrote:
[...]
However, I managed to work around these freezes by removing the two
SMP-related lines from my kernel configuration:
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
Additionally, I am sure ACPI does not have anything to do with th
Scott Renna wrote:
Hello List,
I am having some difficulty in getting my xl0 and xl1 3com cards to work
the way I'd like. I'm running 5.1 Release and I'm basically trying to
have one interface with no IP address(specifying it as such in
/etc/rc.conf as ifconfig_xl1="up") And I'd like to have the
> Okay, got ssh to work but mySQL gives me the following error when I try to
> start it:
>
> ./mysql-server.sh: 6: Syntax error: "&&" unexpected
I remember that one. It is caused by a shell change: construction
'command1 & && command2' is now considered illegal, whereas it was
allowed before.
"Scott Renna" <[EMAIL PROTECTED]> writes:
> Hello List,
>
> I am having some difficulty in getting my xl0 and xl1 3com cards to work
> the way I'd like. I'm running 5.1 Release and I'm basically trying to
> have one interface with no IP address(specifying it as such in
> /etc/rc.conf as ifconfig
Mike Jeays <[EMAIL PROTECTED]> writes:
> I have a Pentium 4 1.8 Ghz on an ASUS P4S533 motherboard. FreeBSD
> 5.1 fails to install - it just hangs while probing for devices, and I
> left it for
> many minutes. There is no ZIP or JAZZ drive; just an IDE disk and
> an LG CD-RW drive.
>
> This mach
"Chris" <[EMAIL PROTECTED]> writes:
> 5.1
Not generally advised for production use, but I'll assume you've read
the release notes and so forth, and have reasons for using it.
> I have a server with 5 public IP addresses, so I'm thinking I'll set
> it up with one IP for the server (as a host) and
John Mills <[EMAIL PROTECTED]> writes:
> I just finished a fairly lightweight ftp installation of 5.1-Release and
> want to offer an X11 login screen. Basic XF86 seems to work fine. I
> followed the 'Configuring xdm' instructions in Greg Lehey's
> _Complete_FreeBSD_, ch.17, but didn't get quite al
"Marius Kirschner" <[EMAIL PROTECTED]> writes:
> Tried upgrading my php to the latest but 'make' fails with the following
> error:
>
> /usr/ports/lang/php4/work/php-4.3.4/ext/gd/libgd/gdft.c:1060: structure has
> no member named `advance'
> /usr/ports/lang/php4/work/php-4.3.4/ext/gd/libgd/gdft.c:
Roman Neuhauser <[EMAIL PROTECTED]> writes:
> I just got this failure on a
>
> FreeBSD freepuppy.bellavista.cz 4.8-STABLE FreeBSD 4.8-STABLE #3: Tue Aug 26
> 12:34:53 CEST 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/FREEPUPPY2_5 i386
>
> in a buildworld of freshly updated /usr/src.
> UPDAT
I'm trying to patch the readline port to support READLINE_OVERWRITE_BASE
as suggested by Edwin. im running into a bit of a snag with info files.
Here is what I have in the Makefile
.if defined(READLINE_OVERWRITE_BASE)
PREFIX= /usr
MANPREFIX= ${PREFIX}/share
INFOPREFIX= ${PREFIX}/share
C
I am slowly understanding how things start up on 5.2, but was wondering
about custom built apps (like qpopper or samba)...
I built these from scratch and wondering if anyone has a web page that
shows the correct way to setup and use rc.conf and rc.d files?
Thanks!
--
J.D. Bronson
Aurora Heal
Hi!
> I guess what I'm asking is, in the httpd.conf can I have 1 entry for the
> same virtualhost - one for port 80 and the other for 443?
Yes you can.
--
Toomas Aas | [EMAIL PROTECTED] | http://www.raad.tartu.ee/~toomas/
* Top Secret! Burn before reading!
___
T Kellers wrote:
On Friday 02 January 2004 08:32 pm, Trey Sizemore wrote:
T Kellers wrote:
On Friday 02 January 2004 06:49 pm, Trey Sizemore wrote:
Eric F Crist wrote:
On Friday 02 January 2004 02:06 pm, T Kellers wrote:
Don't use both device pcm and the .ko modu
On Saturday 03 January 2004 01:54 pm, Trey Sizemore wrote:
> Yes, it's running. When I run the command from the command line now, it
> jumps right to the next line waiting for further input. It's as if it
> played it as requested but I hear nothing. My volume is up on the
> speakers, mixer leve
On Sat, 2004-01-03 at 14:09, T Kellers wrote:
> On Saturday 03 January 2004 01:54 pm, Trey Sizemore wrote:
>
> > Yes, it's running. When I run the command from the command line now, it
> > jumps right to the next line waiting for further input. It's as if it
> > played it as requested but I hear
Try rebuilding gnustep and gnumail with the libart backend. It seems
better than xgps. I had no such problem with libart and gnustep. Add
WITH_GNUSTEP_LIBART=yes and WITH_GNUSTEP_DEVEL=yes in /etc/make.conf
and rebuild. When its done setup your enviorment and run the command
"defaults write NSG
I almost forgot. You will get a different font error with the libart
backend, but I know how to fix it :) Download this gziped tarball
http://www.stupid-design.com/martin/GNUstep.de/Fonts/FreeFonts.nfont.tar.gz
and unpack it in /usr/local/GNUstep/System/Library/Fonts. Everything
should be fine th
I am using Snort and a few other tools to decide which I'd like best.
Here's the thing about Lowell's comment on Bridging. Is this necessary
in this case? I don't want the interface without an IP to EVER transmit
outbound. If I Need to enable bridging I'll do so. The other thing is,
is it possi
On Sat, Jan 03, 2004 at 12:38:33PM -0600, J.D. Bronson wrote:
> I built these from scratch and wondering if anyone has a web page that
> shows the correct way to setup and use rc.conf and rc.d files?
Well, there's the rc.conf(5) man page, and the /etc/defaults/rc.conf
file, which will show you a
At 02:31 PM 1/3/2004, Matthew Seaman wrote:
On Sat, Jan 03, 2004 at 12:38:33PM -0600, J.D. Bronson wrote:
> I built these from scratch and wondering if anyone has a web page that
> shows the correct way to setup and use rc.conf and rc.d files?
Well, there's the rc.conf(5) man page, and the /etc/de
On Sat, Jan 03, 2004 at 03:27:33PM -0500, Scott Renna wrote:
> I am using Snort and a few other tools to decide which I'd like best.
> Here's the thing about Lowell's comment on Bridging. Is this necessary
> in this case? I don't want the interface without an IP to EVER transmit
> outbound. If I
On Jan 2, 2004, at 3:36 PM, Lowell Gilbert wrote:
Will Prater <[EMAIL PROTECTED]> writes:
List,
sshd seems to be crashing my server. I am looking for any help
regarding why this could be happening. I am running sshd version
OpenSSH_3.6.1. Here is the output from dmesg:
the machine crashed every
Robert Warning wrote:
I almost forgot. You will get a different font error with the libart
backend, but I know how to fix it :) Download this gziped tarball
http://www.stupid-design.com/martin/GNUstep.de/Fonts/FreeFonts.nfont.tar.gz
and unpack it in /usr/local/GNUstep/System/Library/Fonts. Everyth
On Sat, Jan 03, 2004 at 02:38:35PM -0600, J.D. Bronson wrote:
> I dont use ports..I only compile from src code...
You are aware that "using ports" is precisely "compiling from source
code"? Ports is a system for automating all of the tedious bits of
compiling up software: it downloads the sourc
Hello,
We are glad to invite you to http://www.daytradegold.com
Kind of regards,
daytradeGold Team
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
> > ./mysql-server.sh: 6: Syntax error: "&&" unexpected
>
> I remember that one. It is caused by a shell change: construction
> 'command1 & && command2' is now considered illegal, whereas
> it was allowed before.
>
> You can fix /usr/local/etc/rc.d/mysql-server.sh script
> yourself, or just get
Hi Martin,
>
> ACPI is still activated. Removing those two lines from my kernel
> configuration solved the problem for me. Have you tried that? This would
> help nailing the problem down, I guess.
>
> BTW, I haven't tried with the geforce again, yet -- still running the
> i740 (which had the probl
Hi Scott,
> I am using Snort and a few other tools to decide which I'd like best.
> Here's the thing about Lowell's comment on Bridging. Is this necessary
> in this case?
It certainly isn't necessary...it is an option.
> I don't want the interface without an IP to EVER transmit
> outbound.
A f
> > I don't want the interface without an IP to EVER transmit
> > outbound.
> A firewall could accomplish this...
Or simply do not assign an IP address at all. And if you want to go below
IP; check out the -arp option in the ifconfig man page.
Dw
___
[
Hi list,
I've installed FreeBSD 4.9 -stable on my Sun LX50
system. Everything seems to work fine, exept reboot.
If I use "reboot" or "shutdown -r now", it looks like
the system is rebooting: screen turning black, the
leds are blinking... but it never comes up.
I'd apreciate any thoughts. Thanx!
Hi,
Okey your right because with maildir-style each messages are saving
in different files but this files are downloaded from client with using POP3
at this moment I wonder How caching Directory or files improve the
performans because files are not available after download ..
But if yo
> Can one restrict permissions on /etc/crontab without creating
> troubles
> if there are nothing special in there except what was
> installed with the
> system?
>
Why do you need to? It should only be writeable by root anyway. Normal
users can just type crontab -e to make entries into thei
> I added these two lines to the stanza for the printer itself:
>
> guest ok = yes
> use client driver = yes
>
> And that seemed to make my "access denied" error go away.
>
Another thing to try is on the windows side, try adding the printer as a
local printer.
XP steps:
1) Add printer
/sys/i386/conf/NOTESon 5.x
Mike Maltese wrote:
options CPU_ATHLON_SSE_HACK
options CPU_ENABLE_SSE
These are also valid kernel options for 4.x.
Where are these documented?
/usr/src/sys/i386/conf/LINT
___
[EMAIL PROTECTED] mailing
Jaroslaw Nozderko wrote:
[...]
I installed 5.2-RC2 again, added
hint.acpi.0.disabled="1"
to /boot/device.hints, but then I got this in dmesg after vga0:...
unknown: can't assign resources (port)
unknown: can't assign resources (port)
unknown: can't assign resources (port)
unknown: can't ass
Benchmarks of all BSD's and Linux
http://bulk.fefe.de/scalability/index.html
-
Benchmark-tables only in german language
Also a comparison with SCO-OpenUnix 8
http://www.wikiservice.at/dse/wiki.cg
Hello,
I've just realised that I am unable to mount a cdrom disk as a non-root user for
*any* of my machines.
All hosts concerned are running FreeBSD-4.9Stable, and running through:
http://www.freebsd.org/doc/en_US.IS...SER-FLOPPYMOUNT does *not* work for me at all..,
Here's what I keep get
On Sun, Jan 04, 2004 at 12:53:52AM +, Stacey Roberts wrote:
> Hello,
> As root I can mount and read the CD fine.., checking for non-root user:
> exit
> ~ $ mount /cdrom
> cd9660: /dev/acd0c: Operation not permitted
> ~ $ mount -t cd9660 /dev/acd0c ~/cdrom
> cd9660: /dev/acd0c: Operation not per
On Sun, 4 Jan 2004 11:59:29 +1100
Gautam Gopalakrishnan <[EMAIL PROTECTED]> wrote:
> On Sun, Jan 04, 2004 at 12:53:52AM +, Stacey Roberts wrote:
> > Hello,
> > As root I can mount and read the CD fine.., checking for non-root
> > user: exit
> > ~ $ mount /cdrom
> > cd9660: /dev/acd0c: Operatio
On Sat, Jan 03, 2004 at 05:12:41PM -0800, Chris Pressey wrote:
> On Sun, 4 Jan 2004 11:59:29 +1100
> Gautam Gopalakrishnan <[EMAIL PROTECTED]> wrote:
>
> > On Sun, Jan 04, 2004 at 12:53:52AM +, Stacey Roberts wrote:
> > > Hello,
> > > As root I can mount and read the CD fine.., checking for no
Hello,
Thanks for the reply..,
- Original Message -
From: "Gautam Gopalakrishnan <[EMAIL PROTECTED]>"
To: To Stacey Roberts
Date: Sun, 04 Jan, 2004 00:59 GMT
Subject: Re: Mount /cdrom as non-root user - does this actually work for anyone?
> On Sun, Jan 04, 2004 at 12:53:52AM +, S
Hello,
- Original Message -
From: "Gautam Gopalakrishnan <[EMAIL PROTECTED]>"
To: To Chris Pressey
Date: Sun, 04 Jan, 2004 01:11 GMT
Subject: Re: Mount /cdrom as non-root user - does this actually work for anyone?
> On Sat, Jan 03, 2004 at 05:12:41PM -0800, Chris Pressey wrote:
> > On Sun
Scott Renna wrote:
I am using Snort and a few other tools to decide which I'd like best.
Here's the thing about Lowell's comment on Bridging. Is this necessary
in this case? I don't want the interface without an IP to EVER transmit
outbound. If I Need to enable bridging I'll do so. The other th
I have the need to re-configire mod_php4 using the ports and add another
package (--with-imagick) that is not part of the default options. Where do I
put the imagick source (should be in /usr/src/php/ext), and which file do I
need to modify to include the "--with-imagick"? Obviously there must be
On Thu, 1 Jan 2004, Philip M. Gollucci wrote:
> vegeta# cd /usr/share/example/cvsup
> vegeta# cvsup -g -L2 standard-supfile
Did you check the standard-supfile before using it? You may have gotten
source that you didn't think you did. In general you should copy this to a
different location and edi
I'm using KDE with gnupg for the encrytion tool. When a message come in that
is signed, I get this in the email:
Message was signed with unknown key.
The validity of the signature cannot be verified.
Problem: OpenPGP plug-in was not specified.
Use the 'Settings->Configure KMail->Security' dialog
Hi
On Sun, 4 Jan 2004 01:13:13 +
Stacey Roberts <[EMAIL PROTECTED]> wrote:
> Hello,
> Thanks for the reply..,
>
> > []
> >
> > chmod +s /sbin/umount /sbin/mount
> >
> > works fine for me (without any other changes necessary). Don't know
> > if it's the recommended procedure though
I just installed the ports linux_divxplayer and avifile, but neither one
seems to do anything. What is the command to actually play a movie in
these programs? I can't find anything remotely close.
Thanks
Chip
___
[EMAIL PROTECTED] mailing list
http://l
On Saturday 03 January 2004 09:36 pm, Chris wrote:
> I'm using KDE with gnupg for the encrytion tool. When a message come in
> that is signed, I get this in the email:
>
> Message was signed with unknown key.
> The validity of the signature cannot be verified.
> Problem: OpenPGP plug-in was not spe
Lowell Gilbert wrote:
Mike Jeays <[EMAIL PROTECTED]> writes:
I have a Pentium 4 1.8 Ghz on an ASUS P4S533 motherboard. FreeBSD
5.1 fails to install - it just hangs while probing for devices, and I
left it for
many minutes. There is no ZIP or JAZZ drive; just an IDE disk and
an LG CD-RW drive
Now I installed mplayer. The man pages shows gmplayer as a gui version
of mplayer. When I enter gmplayer I get command not found. Mplayer works
otherwise. I see a port for skins for the gui, but no port for the gui
itself. Am I missing something here?
thanks
Chip
___
Hello,
Thanks for the kind reply..,
- Original Message -
From: "Joerg Pernfuss <[EMAIL PROTECTED]>"
To: To [EMAIL PROTECTED]
Date: Sun, 04 Jan, 2004 03:44 GMT
Subject: Re: Mount /cdrom as non-root user - does this actually work for anyone?
> Hi
>
> On Sun, 4 Jan 2004 01:13:13 +
On Sat, 2004-01-03 at 23:13, chip wrote:
> Now I installed mplayer. The man pages shows gmplayer as a gui version
> of mplayer. When I enter gmplayer I get command not found. Mplayer works
> otherwise. I see a port for skins for the gui, but no port for the gui
> itself. Am I missing something h
Subhro,
I have done this and tried another command that would spew some data
and the machine crashed again. Any more ideas why the sshd process
would be choking and crashing the server?
I cant send you an example as I am locked out. Looks like sshd is not
starting after the new port install de
Tried to install ImageMagic on a FreeBSD 4.9 box, but 'make' fails with the
following error message:
jp2.c:778: `JAS_IMAGE_CT_OPACITY' undeclared (first use in this function)
gmake[1]: *** [jp2.lo] Error 1
gmake[1]: Leaving directory
`/usr/ports/graphics/ImageMagick/work/ImageMagick-5.5.7/coders'
On Sat, 2004-01-03 at 20:13, Stacey Roberts wrote:
> Hello,
> Thanks for the reply..,
>
> - Original Message -
> From: "Gautam Gopalakrishnan <[EMAIL PROTECTED]>"
> To: To Stacey Roberts
> Date: Sun, 04 Jan, 2004 00:59 GMT
> Subject: Re: Mount /cdrom as non-root user - does this actua
the following howto comes from a post on bsdforums.org. I used it and it
worked well.
#cd /usr/ports/multimedia/mplayer
#make WITHOUT_RUNTIME_CPUDETECTION=yes WITH_GUI=yes WITH_FREETYPE=yes
WITH_XVID=yes WITH_DVD=yes WITH_SVGALIB=yes WITH_MAD=yes WITH_AALIB=yes
WITH_SDL=yes WITH_VORBIS=yes WITH
is it possible to write CDs with a DVD writer on -STABLE usind 'burncd'?
---
bash-2.05a# burncd -f/dev/acd1c -s4 blank data /tmp/frenzy_v02_release.iso fixate
blanking CD - 100 % done
next writeable LBA 0
writing from file /tmp/frenzy_v02_release.iso size 196832 KB
written this track 832 KB (0%)
85 matches
Mail list logo