Trying to use a portmaster as a reverse console server. If I do
date ; telnet portmaster ; date
and connect to a port, the connection stays up for 2 hours and
10 minutes, then gets
Connection closed by foreign host.
Given this, I suspected the portmaster. But other people do not
see the p
On Thu, Dec 02, 2004 at 10:56:05PM -0700, List Admin wrote:
> Thanks for the info Kris. Can you tell me what I need to set it to or
> exactly how to do this? Sorry for the remedial questions but I'm a
> total newbie and I couldn't find this info in the handbook.
Set it to anything; the value doe
On Thu, 2 Dec 2004 21:21:23 -0600, antenneX <[EMAIL PROTECTED]> wrote:
> Am running FBSD-4.10p2 with sendmail-8.12.11 in the base system.
>
> If I wanted to recompile sendmail with a later DB like Berkley DB-4.2,
> since its in the base system, what would be the best way of doing this?
>
> - Rebu
Hi!
I tried to figure out the capability of double:
so I calculated
d=2**n (with a for-loop)
increasing n step by step.
Of course I get a floating point exception when
d is bigger than 10**308.
But what makes me wondering is the fact that printing
printf("%lf",d) gives me the full range of numb
On Fri, 2004-12-03 at 00:18 -0800, Kris Kennaway wrote:
> On Thu, Dec 02, 2004 at 10:56:05PM -0700, List Admin wrote:
> > Thanks for the info Kris. Can you tell me what I need to set it to or
> > exactly how to do this? Sorry for the remedial questions but I'm a
> > total newbie and I couldn't fi
On Thu, 2 Dec 2004 19:34:26 -0500, Brian Barto <[EMAIL PROTECTED]> wrote:
> Hi all, i'm trying to install ethereal from ports. It says it depends
> on shared library netsnmp.6 and the make shortly fails after with the
> following error: shared library "netsnmp.6" does not exist
>
> The net-snmp we
If the goal is simply to stress-test the memory, just take a huge file
and write a shell script loop to gzip it and ungzip it ad infinitum.
I used this technique a while ago to ferret out some memory problems.
In this case, the bad memory manifested itself as gzip eventually
reporting an error that
> -Original Message-
> From: Ramiro Aceves [mailto:[EMAIL PROTECTED]
> Sent: Thursday, December 02, 2004 1:45 AM
> To: [EMAIL PROTECTED]
> Cc: Ted Mittelstaedt
> Subject: Re: I can not install FreeBSD 5.3 in an old Pentium 100 MHz
>
> npx0: INT 16 interface
> pcib0: on motherboard
>
Let me rephrase this previously posted question with a more desriptive
subject, I'm trying to get the CVS version of sylpheed-claws installed
on this 5.3 box (so if you've done it successfully, I'd *love* your
feedback). However, I'm getting a lot of errors:
$ ./autogen.sh --enable-gpgme --enable
hi,
i try to setting dns using chroot on bind9 im followed this webster:
http://freebsd.mu/freebsd/archives/72.html
then after setting up all then i got the error :
Dec 3 19:50:46 brunei named[1067]: starting BIND 9.3.0 -u bind -t
/var/chroot/named -c /etc/namedb/named.conf
Dec 3 19:50:46 br
Hi i have noticed this before, and tryed some workarunds but nothing
works for.
I have a Genius NetScroll+ PS/2 and my whell doesn't work. I have
Buttosn 5 and ZAxisMapping on xorg.conf my moused have flags high and z
4 5 but nothing this make my mouse whell works. It start to happen since
i mi
I have been trying to find out what disk 2 is for
Thanks
paul
NOTICE: This e-mail is intended for the named recipient(s). It may contain
privileged and/or confidential information. If you are not one of the intended
recipients, please notify the sender immediately and destroy this e-mail and
On Fri, 3 Dec 2004 07:38 am, Dick Davies wrote:
> * Mikko Heiskanen <[EMAIL PROTECTED]> [1244 16:44]:
> > I've been wondering about this some time now.
> > The linux compatibility layer (kernel module + linux_base -port)
> > is told to be able to run linux binaries. The handbook even describes
> >
Hello list,
i want to install apache+php+mysql. If i install mod_php i cannot
install php4-extension (mysql, etc ...). If i try to install php4-cli
and extensions apache doesn't know how to handle .php files . What's the
they to go to make apache work with mysql and php ? fBSD is 5.3.
On Fri, 3 Dec 2004 07:23 pm, Florian Hengstberger wrote:
> Hi!
>
> I tried to figure out the capability of double:
> so I calculated
>
> d=2**n (with a for-loop)
>
> increasing n step by step.
> Of course I get a floating point exception when
> d is bigger than 10**308.
> But what makes me wonderin
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 03 December 2004 13:59, [EMAIL PROTECTED] wrote:
> I have been trying to find out what disk 2 is for
If we both mean the n.n-RELEASE-arch-disc2.iso, this is the
live-filesystem-CD.
http://www.freebsd.org/relnotes/5-STABLE/installation
On Fri, 03 Dec 2004 15:30:15 +0200
Cristi Tauber <[EMAIL PROTECTED]> wrote:
>Hello list,
>
> i want to install apache+php+mysql. If i install mod_php i cannot
> install php4-extension (mysql, etc ...). If i try to install php4-cli
> and extensions apache doesn't know how to handle .
On Fri, 3 Dec 2004 04:07 am, Alex Teslik wrote:
> > If you mean to move the disk containing ads1s1e from primary slave to the
> > primary master then the partition will automatically become ad0s1e.
>
> Great. That answers my question exactly.
>
> > But how are the other partitions in your system or
On Friday 03 December 2004 12:49 pm, Luís Vitório Cargnini wrote:
> Hi i have noticed this before, and tryed some workarunds but nothing
> works for.
> I have a Genius NetScroll+ PS/2 and my whell doesn't work. I have
> Buttosn 5 and ZAxisMapping on xorg.conf my moused have flags high and z
> 4 5 b
On 12/02/04 08:09 PM, Jeff Maxwell sat at the `puter and typed:
> Is anyone running 5.3 Release on Dell Power Edge 2850 or any Dell Power
> Edge? I am looking to build a new mail server to replace our current
> mail server, a desktop running 4.9
>
> We have a few Dell Power Edge servers all runn
By installing php4-extensions it will auto to using mod_php with apache. I
have never had a lick of trouble with apache 1.3 and the above mentioned
set-up. Although, as the message states many have complained of trouble with
2.
I recommend installing mysql 1st, apache 1.3 2nd, then the php4-extens
Hi list,
I'm mounting a machine (FreeBSD 4.10) that need to have 2 HD's
mirrored tthrough hardware (IDE Raid).
I looked the Hardware Notes and find the following supported
chipsets that are capable of this:
- Promise Fasttrak-33, -66, -100, -100 TX2/TX4, -133 TX2/TX2000
- HighPoint H
"Michael R. Wayne" <[EMAIL PROTECTED]> writes:
> Trying to use a portmaster as a reverse console server. If I do
>date ; telnet portmaster ; date
> and connect to a port, the connection stays up for 2 hours and
> 10 minutes, then gets
>Connection closed by foreign host.
>
> Given this, I
I just made the transition to 5.3 from 4.x and I am unclear on the the
new rcNG way of starting locally installed services such as MySQL,
Samba etc. I did read the manual pages on rc.d and rcNG.
I just installed MySQL from ports and would like it to start
automatically on boot.
The manual pag
Cristi Tauber wrote:
Hello list,
i want to install apache+php+mysql. If i install mod_php i cannot
install php4-extension (mysql, etc ...). If i try to install php4-cli
and extensions apache doesn't know how to handle .php files . What's the
they to go to make apache work with mysql and
Hi Scott,
Friday, December 3, 2004, 5:30:16 PM, you made these points:
> I just made the transition to 5.3 from 4.x and I am unclear on the the
> new rcNG way of starting locally installed services such as MySQL,
> Samba etc. I did read the manual pages on rc.d and rcNG.
> I just installed MyS
Chris Dillon wrote:
After fiddling around with some of the clock/voltage
related BIOS settings, putting new thermal compound
between the CPUs and heatsinks, reseating cards and
memory, placing the PCs inside a hexagram drawn on
the floor and dancing nak... nevermind... we got them
to run <>
I kn
I am trying to use netatalk-2.0.1 on FreeBSD 4.10-RELEASE.
I can start afpd manually by
/usr/local/sbin/afpd -s /usr/local/etc/AppleVolumes.system -f
/usr/local/etc/AppleVolumes.default
and can access the share from my Mac OS X machine.
There is a script /usr/local/etc/rc.d/netatalk.sh that is su
How to get the best results from FreeBSD questions.
===
Last update $Date: 2004/09/19 02:40:48 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that a
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception. Inev
> 4) I installed portupgrade from the port, and built the database using
>'pkgdb -f', but whenever I run portupgrade or portversion, it
>displays a message "Generating INDEX.tmp - please wait.." and
>hangs there forever. How do I fix this?
>
> - Jerry
Jerry,
It takes my machine about
Hey, i just change the hdd of my laptop because the other brokes.
(new: hitachi 40GB)
I install the freebsd very well, altough, when i boot, it gives me "disk
error" immediatly after i turn on the pc.
I think of geometry hdd problems, because it gives me an warning in the
installation, altough i
On Fri, Dec 03, 2004 at 12:01:54PM -0500, Alan Curtis wrote:
> I am trying to use netatalk-2.0.1 on FreeBSD 4.10-RELEASE.
>
> I can start afpd manually by
>
> /usr/local/sbin/afpd -s /usr/local/etc/AppleVolumes.system -f
> /usr/local/etc/AppleVolumes.default
>
> and can access the share from my
On Fri, 3 Dec 2004 10:07:06 -0700, Tom Connolly <[EMAIL PROTECTED]> wrote:
> It takes my machine about 1 hour to generate the index. Be patient and
> it will complete.
Previously I had FreeBSD 4.10 on my P133 and portupgrade -anrR took 3-4 minutes.
Last week I upgraded to FreeBSd 5.3 and now por
About a month ago I downloaded and installed FreeBSD on a junk computer I had
laying here and man I was impressed! I mean it installed so quickly I couldn't
believe it had installed properly. When I rebooted I was seriously exepecting
alot of errors, but it ran just fine. As time went on I kept
On Fri, 3 Dec 2004 11:45:18 -0600, Greg Donald <[EMAIL PROTECTED]> wrote:
> On Fri, 3 Dec 2004 10:07:06 -0700, Tom Connolly <[EMAIL PROTECTED]> wrote:
> > It takes my machine about 1 hour to generate the index. Be patient and
> > it will complete.
>
> Previously I had FreeBSD 4.10 on my P133 and
Thank you for your replay Scott !
But I'm in Brazil and this kind off Adapter is hard to find here,
expensive and the delivery is t slow :((
Someone know's about some onboard chipset that works correct at FreeBSD 4.10 ??
Tranks,
Alexandre
On Fri, 3 Dec 2004 10:40:38 -0600, Scott Gerhard
NONE--- Begin Message ---
Spam detection software, running on the system "openbsd.cs.colorado.edu", has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or block
similar future email. If you have any questions, s
not "disk error", "Read error"
_
Express yourself instantly with MSN Messenger! Download today it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
___
[EMAIL PROTECT
On Friday 03 December 2004 12:47 pm, mike wrote:
> About a month ago I downloaded and installed FreeBSD on a junk computer
> I had laying here and man I was impressed! I mean it installed so
> quickly I couldn't believe it had installed properly. When I rebooted I
> was seriously exepecting alot of
so the answer to myself
If I would like to connect two physical nets without subnetting
I must use bridging. The following commands solve the problem:
sysctl net.link.ether.bridge=1
sysctl net.link.ether.bridge_cfg=fxp0,fxp1
> 2004-11-29, h keltezéssel 17:02-kor Feczak Szabolcs ezt írta:
> > Hi
Hello,
I searching for a list of sysctl variables.In handbook says that it's about
5000 of sysctl variables.I can find only 50 in the internet and handbook.Where
i can find a full list of sysctl variables?
Thanks.
___
[EMAIL PROTECTED] mailing list
htt
I told that i have this optio but even with this my mouse whell don't work
Gareth Bailey wrote:
I have the following line under mouse input device in my xorg.conf:
option "ZAxisMapping" "4 5"
Try it out, might work for you...
Ciao.
On Fri, 03 Dec 2004 10:49:18 -0200, Luís Vitório Cargnini
<[EMAIL P
> I searching for a list of sysctl variables.In handbook says that it's about
> 5000 of sysctl variables.I can find only 50 in the internet and
> handbook.Where i can find a full list of sysctl variables?
I don't know of a published magical list of "all sysctl variables"
because they are depende
On Thu, 2 Dec 2004 20:49:48 -0500, epilogue <[EMAIL PROTECTED]> wrote:
> On Thu, 2 Dec 2004 16:13:19 -0800
> Jerry Gardner <[EMAIL PROTECTED]> wrote:
>
> > I just loaded FreeBSD 5.3 a few days ago, and generally things are
> > running well, with a few exceptions:
>
> hello jerry,
>
> > 1) How do
I am building a custom kernel. It complied with no errors but
make install KERNCONF=MYKERNEL
failed with the following error
install -o root -g wheel -m 444 crt1.o crti.o crtn.o gcrt1.o /usr/lib
install: crt1.o: No such file or directory
*** Error code 71
Stop in /usr/src/lib/csu/i386-elf.
*** Err
I am building a custom kernel. It complied with no errors but
make install KERNCONF=MYKERNEL
failed with the following error
install -o root -g wheel -m 444 crt1.o crti.o crtn.o gcrt1.o /usr/lib
install: crt1.o: No such file or directory
*** Error code 71
Stop in /usr/src/lib/csu/i386-elf.
*** Err
After doing a clean install of FreeBSD and running sysinstall, for some
reason XFree86 is missing. I thought I did an install of everything, but
just in case I do it all over again. Still no XFree86 on the list - what am
I doing wrong?
--
Kiffin Rex Gish
Gouda, The Netherlands
_
Jermaine McBean <[EMAIL PROTECTED]> writes:
> I have problem adding MySQL server to FreeBSD with FreeRadius. Since I
> already installed FreeRadius /w Mysql client, I cannot do a pkg_add
> Mysql-server because of the FreeRadius' dependancy on a older mysql
> client (mysql-client-4.0.21). Is there
On Fri, 03 Dec 2004 21:33:07 +0100, Kiffin Gish <[EMAIL PROTECTED]> wrote:
> After doing a clean install of FreeBSD and running sysinstall, for some
> reason XFree86 is missing. I thought I did an install of everything, but
> just in case I do it all over again. Still no XFree86 on the list - what
Hi Eric,
Friday, December 3, 2004, 8:55:38 PM, you thoughtfully wrote the following:
>> I searching for a list of sysctl variables.In handbook says
>> that it's about 5000 of sysctl variables.I can find only 50 in the
>> internet and handbook.Where i can find a full list of sysctl
>> variables?
On Fri, 3 Dec 2004 15:11:08 -0600, Joshua Lokken
<[EMAIL PROTECTED]> wrote:
> On Fri, 03 Dec 2004 21:33:07 +0100, Kiffin Gish <[EMAIL PROTECTED]> wrote:
> > After doing a clean install of FreeBSD and running sysinstall, for some
> > reason XFree86 is missing. I thought I did an install of everythin
On Mon, 29 Nov 2004 08:17:40 -0600
Mike Horwath <[EMAIL PROTECTED]> wrote:
> On Mon, Nov 29, 2004 at 06:12:20PM +0530, Akhthar Parvez. K wrote:
> > Hi All,
> >
> > I am getting the following error message in /var/log/messages
> >
> > tail -f /var/log/messages
> > Nov 29 07:24:31 speedy /kernel:
Kevin Smith wrote:
Rizal Ferdiyan wrote:
hello ;
my name rizal from indonesia, I have a problem. My partition windows
(FAT
32) can't mount
in freebsd. My partition in /dev/ad0s1 and /dev/ad0s2. I have been try
write"mount -t msdosfs /dev/ad0s1(ad0s2) /mnt/win1(ad0s1) and
mount_msdosfs /node " but i
Alexander Leidinger wrote:
On Mon, 29 Nov 2004 08:17:40 -0600
Mike Horwath <[EMAIL PROTECTED]> wrote:
On Mon, Nov 29, 2004 at 06:12:20PM +0530, Akhthar Parvez. K wrote:
Hi All,
I am getting the following error message in /var/log/messages
tail -f /var/log/messages
Nov 29 07:24:31 speedy /ke
Marta Resende wrote:
not "disk error", "Read error"
Since you can boot windows try getting the appropriate diagnostics from
the harddisk manufacturer and running them. If I remember correctly
"disk error" when i get it is a lack of proper boot sector, read error
is more likely a problem with th
I have just recently completed a fresh install of FreeBSD 5.3. Upon
completion, I built a new 'kernel', which included a sound driver.
Everything seems to work correctly. Using 'cdcontrol', I can play an audio
disk without any problems.
Unfortunately, I cannot get sound to work in KDE. I have t
Thomas Lippert wrote:
Marta Resende wrote:
not "disk error", "Read error"
Since you can boot windows try getting the appropriate diagnostics from
the harddisk manufacturer and running them. If I remember correctly
"disk error" when i get it is a lack of proper boot sector, read error
is more li
Hello,
I'm using the chrooted isc-dhcp3-server and I'd like the startup script
to do a few extra things which it does not. In order for name
resolution to work for a chrooted dhcp server, the following files must
be in /etc in the chroot:
host.confhostslocaltimeresolv.conf
The
On Fri, 2004-12-03 at 17:17 -0500, Gerard Seibert wrote:
> I have just recently completed a fresh install of FreeBSD 5.3. Upon
> completion, I built a new 'kernel', which included a sound driver.
> Everything seems to work correctly. Using 'cdcontrol', I can play an audio
> disk without any prob
On Fri, Dec 03, 2004 at 03:24:42PM -0500, Alan Curtis wrote:
> I am building a custom kernel. It complied with no errors but
>
> make install KERNCONF=MYKERNEL
>
> failed with the following error
>
> >install -o root -g wheel -m 444 crt1.o crti.o crtn.o gcrt1.o /usr/lib
> >install: crt1.o: No s
On Fri, Dec 03, 2004 at 02:00:33PM -0600, Joshua Lokken wrote:
> > > 4) I installed portupgrade from the port, and built the database using
> > >
> > >'pkgdb -f', but whenever I run portupgrade or portversion, it
> > >displays a message "Generating INDEX.tmp - please wait.." and hangs
> >
On Fri, 3 Dec 2004 15:46:59 -0800, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> On Fri, Dec 03, 2004 at 02:00:33PM -0600, Joshua Lokken wrote:
>
>
>
> > > > 4) I installed portupgrade from the port, and built the database using
> > > >
> > > >'pkgdb -f', but whenever I run portupgrade or portv
On Fri, Dec 03, 2004 at 05:54:17PM -0600, Joshua Lokken wrote:
> On Fri, 3 Dec 2004 15:46:59 -0800, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> > On Fri, Dec 03, 2004 at 02:00:33PM -0600, Joshua Lokken wrote:
> >
> >
> >
> > > > > 4) I installed portupgrade from the port, and built the database u
Resolved:
After a bit more work and lots of good suggestions, I came up with
xterm -e bash --rcfile .myrcfile -i -c "./ticktock && exec bash" &
It does everything I was expecting (assuming your regular .bashrc
doesn't trash the things you set up in the first environment!)
Thanks, all!
--
Don Wild
Hi,
Sorry for this newbie question :(
I've installed Apache-PHP sucessfully, but PHP lacks suport for MySQL
and Postgresql.
Are there any ports for that, or must i edit PHP's Makefile to include
suport for both databases ?
I've searched all around the ports colection, but didn't find anything :
Do you have "options NETATALK" in your kernel? It's not in the GENERIC
kernel, and you'll need to compile a new kernel (or at least I did, the
last time I installed netatalk).
Mike Squires
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mai
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:owner-freebsd-
> [EMAIL PROTECTED] On Behalf Of Byte Byte
> Sent: Saturday, December 04, 2004 0:42
> To: [EMAIL PROTECTED]
> Subject: List of sysctl variables
>
> Hello,
> I searching for a list of sysctl variables.In handbook says th
I recently just cvsup'd my ports tree then portupgrade -a...
Unfortunately after that i started to have issues with Qtorrent and Nicotine
not starting up...
I *thought* my problem was with qtorrent/py-qt so i did a make deinstall
clean on both.. Now I can't recompile either... Can anyone help
On Sat, Dec 04, 2004 at 03:30:36AM +, Pico Pico wrote:
> I recently just cvsup'd my ports tree then portupgrade -a...
>
> Unfortunately after that i started to have issues with Qtorrent and
> Nicotine not starting up...
>
> I *thought* my problem was with qtorrent/py-qt so i did a make deins
> one could include -d option too, then you will get a short description
> what each sysctl mean...
I didn't know about that option. Thanks!
--
If I write a signature, my emails will appear more personalised.
___
[EMAIL PROTECTED] mailing list
http://
Mário Gamito wrote:
Hi,
Sorry for this newbie question :(
I've installed Apache-PHP sucessfully, but PHP lacks suport for MySQL
and Postgresql.
Are there any ports for that, or must i edit PHP's Makefile to include
suport for both databases ?
I've searched all around the ports colection, but di
72 matches
Mail list logo