Re: RELENG_7 versus RELENG_7_0, latter is newer?

On Mon, Feb 25, 2008 at 01:10:04AM +, Chris wrote: > On 24/02/2008, Erik Trulsson <[EMAIL PROTECTED]> wrote: > > > I thought it over and understand what you saying now, they branched > off 7.0R at the start of the release process and from that point > development between that and the stable b

RE: DJ500 dead after >= 16 years.

> -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Predrag > Punosevac > Sent: Friday, February 22, 2008 1:09 AM > To: Ted Mittelstaedt; [EMAIL PROTECTED] > Subject: Re: DJ500 dead after >= 16 years. > > > Ted Mittelstaedt wrote: > > > >> -Original Me

Re: wi0 (4.11) <=> rum0 (7.0)

Hello, John Nielsen! On Thu, Feb 21, 2008 at 10:56:59AM -0500 [EMAIL PROTECTED] wrote about "Re: wi0 (4.11) <=> rum0 (7.0)": > On Thursday 21 February 2008 02:46:09 am Lystopad Oleksandr wrote: > > Hi! > > > > I have two FreeBSD boxes. One with 4.11 and wi0 device, and another > > with 7.0-PRE wi

Re: Sound volume in Totem

Hi, If volume in mplayer is high, then can you give us what is the -ao you are using ? probably that could be a clue ... On Mon, 2008-02-25 at 01:12 +0100, Nikolaj Thygesen wrote: > Hi, > > Both in 6.x and now in 7 I've had issues with the sound volume in Totem. > When I use vlc then nothing's

Re: Nightmare on FreeBSD Street: NIC Drivers

On Sat, Feb 23, 2008 at 01:09:06PM -0600, W. D. wrote: > Compiled, built kernel, and world per: > > > > Still getting timeout errors. Seems like more of them > with this "nfe" driver. > > FreeBSD 6.2, Asus M2NPV-VM

Dell Inspiron 6400 Intel PRO/Wireless 3495 trouble

ME ESTA FALLANDO EL CONTROLADOR DE DE LA RED INALAMBIRCA, NO LO TENGO COMO LO PUEDO CONSEGUIR. FCO Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yah

Adduser and bcrypt password hashes

Hello, something goes wrong while using adduser with bcrypt password hashes on FreeBSD 7.0-RC3: user0:$2a$04$xYpywjtq..p1dnhRzopxTA03kej/n.6zzH1IPnFnq:1001:1001::0:0:User &:/home/user0:/bin/sh user1:$2a$04$x8Oz2mIk..ic9QqpzeeBC/8UkJkon5pW5N5TfwDAG:1002:1002::0:0:User &:

You just recieved an electronic card! Thanks!

Hi, You just recieved an electronic card! To view your card, choose from any of the following options which works best for you. Method 1 Just click on the following Internet address (if that doesn't work for you, copy & paste the address onto your brows

Re: RELENG_7 versus RELENG_7_0, latter is newer?

On 24/02/2008, Erik Trulsson <[EMAIL PROTECTED]> wrote: I thought it over and understand what you saying now, they branched off 7.0R at the start of the release process and from that point development between that and the stable branch wont necessarily be synched. My only wonder left now is that

Re: where do i find these perl modules??

On Sun, 24 Feb 2008 18:11:00 -0600 Paul Schmehl <[EMAIL PROTECTED]> wrote: > --On February 24, 2008 3:30:18 PM -0800 Gary Kline > <[EMAIL PROTECTED]> wrote: > > > > > > > Do we have the following perl modules in ports? > > > > Tk > > Encode > > Encode::Unicode (Not sur

Sound volume in Totem

Hi, Both in 6.x and now in 7 I've had issues with the sound volume in Totem. When I use vlc then nothing's wrong, but in Totem even with all the different available volumes turned to the max, I get much less volume/sound. Previously (6.x on a different machine) I could go into mplayer and tur

Re: where do i find these perl modules??

--On February 24, 2008 3:30:18 PM -0800 Gary Kline <[EMAIL PROTECTED]> wrote: Do we have the following perl modules in ports? Tk Encode Encode::Unicode (Not sure if this is seprate from the Encode module) Encode::Guess HTML::Parser LWP:

where do i find these perl modules??

Do we have the following perl modules in ports? Tk Encode Encode::Unicode (Not sure if this is seprate from the Encode module) Encode::Guess HTML::Parser LWP::Simple I'm trying to understand how gtk20 and other graphic ports

Re: Compiling new kernel fails on 7.0RC3

On Mon, 25 Feb 2008 00:00:40 +0100 Erik Trulsson <[EMAIL PROTECTED]> wrote: > On Sun, Feb 24, 2008 at 05:34:20PM -0500, E. J. Cerejo wrote: > > After having a few problems with Fbsd 6.3 stable I decided to try 7.0 which > > impressed me right away because I noticed right away that it performed >

Re: 6.3 DHCP and static_routes

On Sat, Feb 23, 2008 at 01:34:54PM +0100, Andrea Venturoli wrote: > This used to work fine with 6.2, with the default route set up by the > DHCP servers. > > After I upgraded to 6.3, I get no default route anymore. This is the > relevant part of my logfile: As of FreeBSD 6.3 dhclient supports

Re: Compiling new kernel fails on 7.0RC3

add device scbus or remove vpo On Sun, 24 Feb 2008, E. J. Cerejo wrote: After having a few problems with Fbsd 6.3 stable I decided to try 7.0 which impressed me right away because I noticed right away that it performed better on my computer. Now I decided to build my own custom kernel and af

Re: Compiling new kernel fails on 7.0RC3

On Sun, Feb 24, 2008 at 05:34:20PM -0500, E. J. Cerejo wrote: > After having a few problems with Fbsd 6.3 stable I decided to try 7.0 which > impressed me right away because I noticed right away that it performed > better on my computer. Now I decided to build my own custom kernel and > after r

Compiling new kernel fails on 7.0RC3

After having a few problems with Fbsd 6.3 stable I decided to try 7.0 which impressed me right away because I noticed right away that it performed better on my computer. Now I decided to build my own custom kernel and after running the first command: %buildkernel KERNCONF=mykernel I get this

Re: FreeBSD & Linux distro

On Fri, 2008-02-22 at 08:25 -0500, Robert Huff wrote: > Da Rock writes: > > > > Mercedes? :) > > > > > > Fits the first, dunno about the third. Certainly not the second -- > > > Benz are some of the best-engineered and built cars in existence. > > > > > > Maybe BMW, aka Bunch-a Money Wast

Re: RELENG_7 versus RELENG_7_0, latter is newer?

> > > > 1 - RELENG_7_0 in newvers.sh shows 7.0-RELEASE whilst RELENG_7 shows > > PRERELEASE. > > Yes, it is supposed to be that way. RELENG_7 will continue to show > -PRERELEASE until after 7.0-RELEASE is out, at which point it will switch to > show -STABLE. > That is my point the 7.0 branch is

RE: DHCP Server

> -Original Message- > From: Wojciech Puchar [mailto:[EMAIL PROTECTED] > Sent: 24 February 2008 08:56 PM > To: Jaco le Roux > Cc: freebsd-questions@freebsd.org > Subject: Re: DHCP Server > > > BSD box, the other client is connected via a bridge on the first client. I > > have a section in

Re: DHCP Server

BSD box, the other client is connected via a bridge on the first client. I have a section in my /usr/local/etc/dhcpd.conf to assign a specific IP to client #1: host myhost { hardware ethernet xx:xx:xx:xx:xx:xx; fixed address 192.168.1.16; } The problem is, both client #1 and #2 get assigned th

DHCP Server

Hi, I am running dhcpd on my FreeBSD machine and have 2 clients that requests an IP address. The one client is connected directly to the same network as the BSD box, the other client is connected via a bridge on the first client. I have a section in my /usr/local/etc/dhcpd.conf to assign a specifi

Harddisks DMA errors

Hello, After having problems with DMA errors on my old PATA 200GB disks because of a faulty harddisk, I switched to SATA 500GB disks. I used fdisk to create slices and newfs them, then copied everything using dump & restore to my new harddisks. Now I have problems running into the next er

Re: [Wireless] Can't connect to wlan

Redirect -> freebsd-mobile, cc Ben Ref: http://lists.freebsd.org/pipermail/freebsd-current/2007-November/080653.html On Sunday 24 February 2008 16:50:47 Alphons "Fonz" van Werven wrote: > Okay, so here goes: > > SYNOPSIS > > Wireless network gets detected, but has "no carrier". So I can't connec

libdisk(3), geom(4), gmirror(8), sysinstall(8)

All: There was a patch to libdisk in late 2005 that added geom(4) support to libdisk. I'm noticing that Disk_Names() doesn't grab contact/ or mirror/ volumes, though. It still depends on kern.disks. Should I add my gmirror/gconcat probing code to /usr.sbin/ sysinstall/devices.c directly, o

RE: Dropped Packets

Hi, Its interesting you'd say that I'd virtually ruled it out given that it takes over a day to start? What I do see sometimes is a message warning me that its limiting open port RST responses - the unit is under a reasonable amount of load though (but not overloaded). The strange thing is

Re: ports problems

Download sources for software you need, and compile it manualy. but firstly i`d try to delete ports directory, and fetch ports again. Daniel Molina Wegener пишет: Hi, I've updated and upgraded the ports tree to the "." branch but serveral of ports doesn't compile or are completly absent on the r

Re: Dropped Packets

Hardware issues come to mind. Do you have a dmesg? SC On Sun, Feb 24, 2008 at 9:27 AM, Dave Raven <[EMAIL PROTECTED]> wrote: > Hi all, > I have a FreeBSD 4.11 (I know its outdated but I don't have an > option) box which is behaving very weirdly. After about a day and a half it > start

Re: [Wireless] Can't connect to wlan

Okay, so here goes: SYNOPSIS Wireless network gets detected, but has "no carrier". So I can't connect. PROMPT All prompts are indicated as $ to avoid confusion with #-comment lines, but in reality most things are done by root. THE NETWORK SSID: SpeedTouch1EC5E8 radio type: 11g security type:

Dropped Packets

Hi all, I have a FreeBSD 4.11 (I know its outdated but I don't have an option) box which is behaving very weirdly. After about a day and a half it starts to drop packets - about 6-10% of pings at least, and tcp traffic becomes unreliable etc. I have swapped out the network cards, the cab

Re: Dual core CPU's, but only 2 CPU's in-use?

Tigger wrote: On Sun, 24 Feb 2008 12:46:23 +0100 Dominic Fandrey <[EMAIL PROTECTED]> wrote: Tigger wrote: Hello. I have a Xeon system with 2 CPU's installed (dual-cores). Under FreeBSD 6.2, a systat reported 4 CPUs in use and so did dmesg. Under FreeBSD 6.3, dmesg is reporting the 4 CPUs, b

vpnc problem: protocol not supported?

Hello, i am trying to connect to the vpn at university from home. I have made a new kernel with what i think (thought) was needed for ipsec from reading the handbook, my kernel file looks like: include GENERIC ident MYCO

ports problems

Hi, I've updated and upgraded the ports tree to the "." branch but serveral of ports doesn't compile or are completly absent on the repositories. What can I do?, I need the system working. I'm using 6.3-STABLE. -8<--8<--8<--8<--8<- pkg_create: make_dist:

Can't install 7.0-RC3 on dell dimension 3100 (usb problems)

Hello, I am unable to boot (and much less install) FreeBSD on a Dell Dimension3100 computer, apparently due to some usb problems. here's the error message sio0: configured irq 4 not in bitmap of probed irqs sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs sio0

Re: gmirror on slice

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Daniel Gerzo wrote: | Hello people, | | I'm trying to set up a gmirror on two slices, but I am stuck | somewhere. I am unable to find out what is wrong. Here's what I have | done so far: | | I have 2 disks in the box. I have created 2 slices on bo

Re: RELENG_7 versus RELENG_7_0, latter is newer?

On Sun, Feb 24, 2008 at 01:16:04PM +, Chris wrote: > I expected RELENG_7 to have newer files than RELENG_7_0 as the latter > tracks a release whilst the former tracks CURRENT/STABLE whichever it > currently is. > > However I noticed 2 things. > > 1 - RELENG_7_0 in newvers.sh shows 7.0-RELEASE

RELENG_7 versus RELENG_7_0, latter is newer?

I expected RELENG_7 to have newer files than RELENG_7_0 as the latter tracks a release whilst the former tracks CURRENT/STABLE whichever it currently is. However I noticed 2 things. 1 - RELENG_7_0 in newvers.sh shows 7.0-RELEASE whilst RELENG_7 shows PRERELEASE. 2 - RELENG_7_0 has higher version

Normal CPU usage with a PPP connection

Hey guys, i'm running 6.3-R with (i think) userland ppp to connect to my ADSL provider over PPPoE. I build a number of graphs(mrtg) for system stats and i am noticing that under heavy load on my ppp connection, that is sustained 150KB/s for an hour or so my cpu usage, based on my graph, hovers arou

Re: Dual core CPU's, but only 2 CPU's in-use?

On Sun, 24 Feb 2008 12:46:23 +0100 Dominic Fandrey <[EMAIL PROTECTED]> wrote: > Tigger wrote: > > Hello. I have a Xeon system with 2 CPU's installed (dual-cores). > > Under FreeBSD 6.2, a systat reported 4 CPUs in use and so did > > dmesg. > > > > Under FreeBSD 6.3, dmesg is reporting the 4 CPUs

Re: Unable to compile anything from ports

> Yes. Not many use VIA cpu's, so I think it would help a lot if you'd do a > send-pr. Include a full dmesg so the CPU flags can be seen. The default on > FreeBSD is to compile with -O2 now, so either cc should disable the specific > optimization for which there is no matching CPU instruction inter

Re: Unable to compile anything from ports

> That's a new revision of the C3 which supports SSE: 'c3-2' is a better > CPUTYPE for it. *sighs* Oh well. Guess its time to rebuild world again. =) Thanks for the info Bruce. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/

Re: Dual core CPU's, but only 2 CPU's in-use?

Tigger wrote: Hello. I have a Xeon system with 2 CPU's installed (dual-cores). Under FreeBSD 6.2, a systat reported 4 CPUs in use and so did dmesg. Under FreeBSD 6.3, dmesg is reporting the 4 CPUs, but systat is only reporting 2 CPUs (CPU 0 and CPU 2). How do I enabled the second cores on t

Dual core CPU's, but only 2 CPU's in-use?

Hello. I have a Xeon system with 2 CPU's installed (dual-cores). Under FreeBSD 6.2, a systat reported 4 CPUs in use and so did dmesg. Under FreeBSD 6.3, dmesg is reporting the 4 CPUs, but systat is only reporting 2 CPUs (CPU 0 and CPU 2). How do I enabled the second cores on the CPU's or are th

Re: setting X11BASE

> > > > I'm finding it especially "interesting" that /etc/make.conf, > > > > which to judge from its location is part of the base, depends > > > > on a setting from something in the /usr/ports tree. > > > > > > Well, actually it doesn't. What gives you this impression? > > > > Paul Schmehl reported