ed1 interface sometimes not recognized

t ed0. As nearly as I can tell it's on its own irq (5). Also, what causes the unknown: can't assign resources messages, and how do I map the to something I can look for? dmesg: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 19

Re: user ppp and PPPoE bridging

To answer my own question: I had the mux type set wrong -- VC-based instead of LLC-based. While the line comes up, the session is never opened because of the mux mismatch. moving right along now... Gary The freebsd box is connected directly via ed1 to the dsl modem; a crossover cable is used

Re: user ppp and PPPoE bridging

Hi Nikos, Thank you and rw for your replies. The freebsd box is connected directly via ed1 to the dsl modem; a crossover cable is used; the packets are clearly reaching the modem, as it records them as received. I've simplified ppp.conf to the following, essentially the ppp.conf.s

user ppp and PPPoE bridging

ax 1492 set mru max 1492 enable mssfixup set speed sync enable lqr set lqrperiod 5 set ctsrts off disable ipv6cp set dial set login set timeout 0 set authname xx set authkey yy add! default HISADDR ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

user ppp and PPPoE bridging

ax 1492 set mru max 1492 enable mssfixup set speed sync enable lqr set lqrperiod 5 set ctsrts off disable ipv6cp set dial set login set timeout 0 set authname xx set authkey yy add! default HISADDR ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

USB Genius gamepad and FreeBSD

Hello; I bought a Genius MaxFire G-12U Vibration gamepad: http://www.geniusnet.com/geniusOnline/portlets/productArea/category/queryPro.do;jsessionid=HRyQbpNQr267pNJ6WMpjgpDJV8Ft11K3R42LLTT2vWVCtRvhrwWS!213882158?productId=31009&test=portlet-action and plugged it into FreeBSD-6.2-Release (a

Re: tcpdump -- non-local traffic not showing

he desired port. A computer on a different port will not see any of those packets. You have to use a hub or just a non-learning bridge to get the packets forwarded to all ports. Those are really hard to find anymore. _______ freebsd-questions@free

tcpdump -- non-local traffic not showing

. Does the interface drop packets with a different mac address, even when supposedly put in promiscuous mode? Clues? Thanks for any insights, Gary ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions

Re: ports/115885: misc/help2man: help2man ignores installed gettext

note(s) to self: help2man port is borked. every other port with perl-module dependencies is fine ... freebsd folks not interested in fix. do a manual install instead. problem solved. outa here. ___ freebsd-questions@freebsd.org mailing list http

Re: ports/115885: misc/help2man: help2man ignores installed gettext

-Why: > It is unecessary to reopen another bug report, since you neither provide a > patch nor convinced us that this should be a supported configuration. again, WHAT "supported configuration" are you talking about here? there's a properly installed perl-module. expecti

Re: ports/115885: misc/help2man: help2man ignores installed gettext perl mod; insists on stale p5-* dependency

hi, > You have perl modules installed, that have no corresponding installed > FreeBSD port. i do not use BSDPAN -- it's sloppy about its dependency mgmt. as i do on every other os/platform, i use ONLY "native" cpan/cpanp. i have dozens of cpan-installed perl-modules.

Re: Convince me, please!

On 8/10/07, Wojciech Puchar <[EMAIL PROTECTED]> wrote: > > > Start with DesktopBSD 1.6 since it's closer to FreeBSD than PC-BSD if > > you need to learn FreeBSD more. > > both of them should win a similar message at www.freebsd.org > > "We are not suppor

Re: request add db45/db46 support to mail/exim port

gt; > The updated patch is in PR 115427: > > http://www.freebsd.org/cgi/query-pr.cgi?pr=115427 great! Thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

make install a port, but with a package?

to wait for Ruby to build. Sure, I could do it with pkg_add or sysinstall but it would be neat to be able to do everything from the ports tree. thanks, joel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

Re: kernel compilation fails

ou can get this from the cvsweb. Cheers Patrick > > Config and make depend run succefully but compilation fails (done with > make buildkernel). > > I give you the kernel config file. > > cheers, > > -- > Nicolas Haller > ___

Re: virtualized network interfaces within jails

Hardware appears to be suported (Dell 1950, with Broadcom NetX2 > cards)... any help is appreciated. > > ~Joe > > > - > Yahoo! oneSearch: Finally, mobile search that gives answers, not web > links. > ___

Re: SMP options and core dump failure

On Tue, July 3, 2007 02:59, Yong Rao wrote: > Hello, > > > > We have a problem with SMP kernel. It could not dump out core when the > crash happens. Which version of FreeBSD? -Current? better ask in [EMAIL PROTECTED] or file a PR. http://www.freebsd.org/send-pr.html Rgds, P

Re: FreeBSD 7.0-Release

On Tue, July 3, 2007 01:33, Pietro Cerutti wrote: > > matt donovan wrote: >> it's on the freebsd site but the code freeze has begun so some are >> guessing > /\/\ > > Did you mean "it isn't", right? Because I just can't find any inf

Xorg build problem - font-misc-misc

5 7031 The University of Queensland| WWW: www.auscert.org.au Qld 4072 Australia | Email: [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

[OT] Curious: what's up with bsdnews.com?

Hello list, Just curious: for me from the Netherlands bsdnews.com has not been accessible for a few days already. Does anybody know what is wrong? It seems that the domainname is still there and an A record as well. Regards, Lars. ___ freebsd-questions

how 2 address&port map outbound traffic to multiple/different IPs on a single intfc?

le' outbound NAT: nat on $ext_if from z.z.z.102 port 25 to any -> ($ext_if) nat on $ext_if from z.z.z.102 port 25 to any -> ($ext_if) doesn't do it either - i dno't think -- as $ext_if picks up the "primary IP" assigned via the pppoe startup, x.x.x

Re: fbsd 6.2 pf starts -- but not on boot

that'll require reading & beer. which is why weekends were invented ;-) thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Release Schedules

Patrick > -Tom > _______ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > _______ freebsd-questions@freebsd.org

Re: fbsd 6.2 pf starts -- but not on boot

hi, Funny thing is, I doubt I'd have noticed it without your blank line! heh. well, glad i could help! i live to serve ;-) cheers! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questio

Re: fbsd 6.2 pf starts -- but not on boot

t had started but the rules were not loaded, or some such ... thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: fbsd 6.2 pf starts -- but not on boot

nk line. woohoo! and, thanks all for the add'l comments -- good pointers on anchors and pf operation in general. archiving this thread! :-) cheers. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: fbsd 6.2 pf starts -- but not on boot

chas, mainly due to not (yet) having read the /right/ man page, bu i'm makin progress! now, to clean up a bit more, and see if all's better ... thanks! _______ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: fbsd 6.2 pf starts -- but not on boot

uld make of that backtick inside quotes, I know not .. wow! good eye. checked, and that's some cp-n-paste weirdness, or my fat thumbs. the line actually is, > ppp_profile="ppp1" thanks for the check! ___ freebsd-questions@freebs

Re: fbsd 6.2 pf starts -- but not on boot

rrect here. As FreeBSD boots up, this interface does not yet exist when pf is loaded. clear. As soon as ppp is loaded and interface tun0 has been created, pf will happily load your ruleset. aha. does that suggest that i'm simply not waiting long enough? your following comments suggest ot

fbsd 6.2 pf starts -- but not on boot

dmail_outbound_flags="-L sm-queue -q30m" sendmail_submit_enable="YES" sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" # DHCP Services dhcpd_enable="YES" dhcpd_chroot_enable="YES" dhcpd_chuser_enable="YES" dhcpd_devfs_enable="YES" dhcpd_conf="/usr/local/etc/dhcpd.conf" dhcpd_flags="-q -early_chroot" dhcpd_ifaces="sis0" dhcpd_jail_enable="YES" dhcpd_rootdir="/var/chroot/dhcpd" dhcpd_withgroup="dhcpd" dhcpd_withumask="022" dhcpd_withuser="dhcpd" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

6.2/i386 X/DRI issues

Hi All Installed FreeBSD i386, Rel 6.2 on a machine thats got an i945 chipset on the motherboard, integrated video too. Everything seems to be supported, SATA controllers the lot... but no AGP or DRM support? i have the statements device agp device drm device i915drm in my kernel conf

HP 2605 printer and FreeBSD.

t knows to me to say if effectively it is therefore.. Thanks. -- Isaia Luciano FreeBSD user ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

make is failing on port install

bsd.port.mk", line 2366: if-less else "/usr/ports/Mk/bsd.port.mk", line 2366: Need an operator "/usr/ports/Mk/bsd.port.mk", line 2380: if-less endif "/usr/ports/Mk/bsd.port.mk", line 2380: Need an operator "/usr/ports/Mk/bsd.port.mk", line 6046: if-less e

RE: Kernel Options fo a File Server

man tuning? Cheers, Lars. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ivan Carey Posted At: Tuesday, May 22, 2007 1:28 PM Posted To: FreeBSD-Questions Conversation: Kernel Options fo a File Server Subject: Kernel Options fo a File Server Hello

Re: PPPoE equivalent?

x27;s a bit of discussion abt it here: http://lists.apple.com/archives/Darwin-development/2001/Aug/msg00502.html dunno if this is related -- just throwing it out there. cheers. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/ma

Re: PPPoE equivalent?

e your simple script? thanks! _______ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

something wrong with freebsd-current maillist?

Hi, I sent about an hour ago an email to the freebsd-current maillinglist. This email has not yet arrived to the list, I can see the email leaving my mailserver and being delivered to one of the freebsd boxes but after that it seems stuck. Also when I look at the archives the last message date is

Load balacing DNS

some hundreads of devices and I cannot use a secondary dns... Bye ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Suggestions for an antispam.

Hi, I would want a suggestion for an antispam for my email. I use getmail-procmail-mutt in order to receive the mail. Thanks. -- Isaia Luciano FreeBSD user ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

Fwd: Thunderbird 2.0

I'm not 'renting' my OS-- _______ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: setting ENV VARs in make.conf/ports.conf ?

I'd direct this question to the ports@ mailing list. fair enough. thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

setting ENV VARs in make.conf/ports.conf ?

hi, i've installed FreeBSD v6.2-RELEASE, plus 'portconf' & 'ccache' from ports. i've setup, /etc/make.conf - PERL_VER=5.8.8 PERL_VERSION=5.8.8 USE_OPENSSL_PORT=true OPENSSLBASE=/usr/local USE_OPENSSH_PORT=true WITHOUT_X11=

how to force ports to use OPENSSLBASE=/usr/local?

hi, i've an install of FreeBSD 6.2-RELEASE. base ssl is: /usr/bin/openssl version OpenSSL 0.9.7e-p1 25 Oct 2004 i've installed openssl from ports, `which openssl` version OpenSSL 0.9.8e 23 Feb 2007 i'm trying to get a ports-b

Re: FreeBSD 6.1 kernel panic

Gotcha, I will try these options but just to recap: How likely is it that the bug reported in that NetBSD page also occurs on FreeBSD ? The system works fine otherwise, if I don't do any heavy copying. I had it up for 30 days without any incident whatsoever. The moment I start do

FreeBSD 6.1 kernel panic

I have the following setup: 3ware 9550SX-4LP raid card 4x 500GB SATA HD's in Raid 10. It's running on: FreeBSD store01 6.1-RELEASE-p12 FreeBSD 6.1-RELEASE-p12= #0: Mon Jan 22 11:20:03 UTC 2007 I use this machine mainly for backups and NFS mount points. The pr

FreeBSD 6.1 kernel panic

I have the following setup: 3ware 9550SX-4LP raid card 4x 500GB SATA HD's in Raid 10. It's running on: FreeBSD store01 6.1-RELEASE-p12 FreeBSD 6.1-RELEASE-p12 #0: Mon Jan 22 11:20:03 UTC 2007 I use this machine mainly for backups and NFS mount points. The problem is that when

Re: libxklavier fails portupgrade

never mind, they've released a fix in the last few hours On 3/25/07, FreeBSD WickerBill <[EMAIL PROTECTED]> wrote: Because libxklavier fails, subsequently so does libgnomekbd and gnome-control-center. I'm using 6.1 p11 and just suffered through a couple of days recompiling

libxklavier fails portupgrade

-2.4.2,1 ===> Cleaning for expat-2.0.0_1 ===> Cleaning for libxklavier-3.2_1,1 ===> Extracting for libxklavier-3.2_1,1 => MD5 Checksum OK for libxklavier-3.2.tar.gz. => SHA256 Checksum OK for libxklavier-3.2.tar.gz. ===> Patching for libxklavier-3.2_1,1 ===> Applying FreeBSD patches

Re: I need help with external USB DVD writer.

On Mon, Mar 19, 2007 at 03:34:40PM +0100, Wojciech Puchar wrote: > > umass.c patch (6.2-RELEASE): > > > everything works. i think umass driver is simply too restrictive > ___ > freebsd-questions@freebsd.org mailing list >

Re: I need help with external USB DVD writer.

> the firmware updating tool (it's called LiveUpdate or something). It > only works in Windows, so hope that isn't a problem. If there's a > firmware upgrade for your drive, it might fix this error and allow the > FreeBSD dvd-tools to read your burner's configuration

Re: Flash with Firefox 2

linux-flashplugin/flashplayer.xpt . > # ln -s /usr/local/lib/npapi/linux-flashplugin/libflashplayer.so . > > Hope this helps, > >> >> -- >> Jay Chandler >> Network Administrator >> Chapman University > > > Aloha. I've been following this thre

I need help with external USB DVD writer.

Hi. I have bought recently an external USB DVD writer Samsung Super (model SE-S184M/EUBN). I do not succeed in to burn DVD (only CD). The system (FreeBSD 6,1) recognizes masterizzatore like: umass0: TSST corp USB Mass Storage Device, rev 2.00/0.00, addr 3 cd0 at umass-sim0 bus 0 target 0

Samsung DVD writer.

Hello to all. I have bought recently an external USB DVD writer Samsung Super (model SE-S184M/EUBN) I do not succeed in to burn DVD (only CD). The system (FreeBSD 6,1) recognizes masterizzatore like: umass0: TSST corp USB Mass Storage Device, rev 2.00/0.00, addr 3 cd0 at umass-sim0 bus 0

Perforce access

Linux) iD8DBQFF8YbvTqd8JUnGnQ0RAp8sAJ4u8xm5fSKrHIezyYoU6KEOByjlwQCgnYBv 4tSuEI/F0IlLrEdgYqC6xqc= =+CvU -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any ma

ext3 support

dear list, does freebsd 6.x support the ext3 filesystem? TIA zheyu ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

LKM Trojan?

the /proc directory returns an empty list. I have recompiled the kernel and world but the problem persists. Any suggestions on how to fix this without having to reinstall from scratch? TIA, Tomoki ___ freebsd-questions@freebsd.org mailing list http://lists

ASUS M2n - AMD64 supported by FreeBSD 6.2?

Dear list, i am currently deciding on hardware for a server at home which will manage my email (Mailtoaster), website, dns, dhcp and samba. It will replace 2 boxes. The load is currently average 0.4 on a Dual Pentium 3 800mhz (thats the old mailserver - FreeBSD 5.4) and the other is just a

Re: GMail [and other free email] and these lists?

and see what some of it's users have to say about it. It is good enough for someone who's greatest need is writing to Grandma, but that is about it. -- Gerard The greatest trick the devil ever played was convincing the world he didn't exist. _

Re: portupgrade failure

by/1.8/optparse.rb:755:in `initialize' from /usr/local/sbin/portupgrade:220:in `new' from /usr/local/sbin/portupgrade:220:in `main' from /usr/local/sbin/portupgrade:2084 ___ freebsd-questions@freebsd.org mailing list http://list

Re: how to enable linux flash player in firefox

recognize > >> "_dlsym" and say it is so. > > > > You need to apply the rtld patch mentioned in the first link above. > > And I thought that I read that carefully! Was that paragraph added since > I read the document? ;) > > Anyway. Can we hope th

Re: Remote Desktop Connection

On 1/24/07, Garrett Cooper <[EMAIL PROTECTED]> wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 FreeBSD WickerBill wrote: > On 1/24/07, Grzegorz Pluta <[EMAIL PROTECTED]> wrote: >> >> Thanks for all the replies guys! >> It was really helpful >> Chee

Re: BBC debate "Battle of the operating systems"

; >> http://news.bbc.co.uk/2/hi/technology/6288119.stm > >> > >> They want one individual to represent each OS. Apparently they only want Vista, > >> OS X and Linux, but I don't see why we can't press for FreeBSD. > > > > I sent them a comment about how F

Re: Remote Desktop Connection

On 1/24/07, Grzegorz Pluta <[EMAIL PROTECTED]> wrote: Thanks for all the replies guys! It was really helpful Cheers, Greg Kevin Kinsey wrote: > Grzegorz Pluta wrote: >> Hi. >> Id like to asj you guys if you used any remote desktops with freebsd? >> Which >>

Re: Remote Desktop Connection

Grzegorz Pluta wrote: Hi. Id like to asj you guys if you used any remote desktops with freebsd? Which client/server would you recommend, and why? Witch wich desktop env have you been using it? Cheers, GregZX ___ freebsd-questions@freebsd.org mailing

Flash 9

7;m at work, not at a *BSD desktop. Thanks... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Load balancing outgoing mail relay

This (multiple A records) works for me, at least approximately. Both Bind and MS DNS will round robin when multiple A records exist for the same hostname. What is your setup? FreeBSD 6.2 with Sendmail (initially) and now postfix. MS DNS with round robin (and TTL set to 0 on the records

Balancing outgoing SMTP relay

___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Load balancing outgoing mail relay

___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Firefox mess in Freebsd 6.1

ocal/lib/npapi/linux-flashplugin/libflashplayer.so] libpthread.so.0 libpthread.so.2 libdl.so.2 pluginwrapper/flash7.so libz.so.1 libz.so.3 libm.so.6 libm.so.4 libc.so.6 pluginwrapper/flash7.so -

Re: is THIS why the 6.2 release seems stalled ?

tchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott at fishballoon.org | 0xAA775B8B | -- Anon _______ freebsd-questions@freebsd.org mailing list http:/

Sauerbraten gui edition choppy music

gs and symlinks. _______ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Help

D <http://www.pcbsd.com> It runs well on older equipment. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: NEC 7170A-0B

On 12/18/06, FreeBSD WickerBill <[EMAIL PROTECTED]> wrote: I was wondering if anyone has used one of the later NEC *7170A<http://www.newegg.com/Product/Product.asp?Item=N82E16827152076> *DVD burners sucessfully with 6.0 or later? Thanks for your responses. Yes, I have and i

freeBSD network error

Hi all I have installed FreeBSD 6.0 unix recently. But I am not able to configure network (internet). I am having leased line with Realtek gigabit ethernet NIC. When I try to configure it is not showing the interface itself on sysinstall. Whether this freeBSD support this card or else what I

Freebsd- Browser for apache

Hi all I want to install php with apache in freebsd unix. I installed apache2 and php 5.2.0. But php file not working and also i want to know the method of running. Whether browser and x windows are needed for running apache and php. If suppose where to find out the tar file and how to

NEC 7170A-0B

I was wondering if anyone has used one of the later NEC *7170A<http://www.newegg.com/Product/Product.asp?Item=N82E16827152076> *DVD burners sucessfully with 6.0 or later? Thanks for your responses. ___ freebsd-questions@freebsd.org mailing lis

Re: sources version file?

the > cvs sources have been downloaded? # egrep "REVISION|BRANCH" /usr/src/sys/conf/newvers.sh REVISION="5.4" BRANCH="RELEASE-p22" RELEASE="${REVISION}-${BRANCH}" Cheers Patrick ___ freebsd-questions@freeb

make.conf FreeBSD 6.2 RC1

SENDMAIL=true NO_LPR=true NO_BIND=true # added by use.perl 2006-11-15 21:59:37 PERL_VER=5.8.8 PERL_VERSION=5.8.8 end of /etc/make.conf _______ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe,

Re: networking question.

this helps Patrick On Mon, November 13, 2006 22:38, Marwan Sultan wrote: > > Hello Gurus, > >192.168.0.1 is the internet server dialer (winXP) ---> switch --> > 192.168.0.2 FreeBSD 6.1 NAT 192.168.1.1 >clients are 192.168.1.xxx everything works great, Internet goes

Installing DHCP server in a jail

which DHCP server should I use? Is there one in the ports? Thanks Patrick ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Installing DHCP server in a jail

which DHCP server should I use? Is there one in the ports? Thanks Patrick ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Installing DHCP server in a jail

which DHCP server should I use? Is there one in the ports? Thanks Patrick ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

make problems with amarok 1.4.3_3

sive] Error 1 gmake[2]: Leaving directory `/usr/ports/audio/amarok/work/amarok-1.4.3 /amarok/src' gmake[1]: *** [install-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/audio/amarok/work/amarok-1.4.3 /amarok' gmake: *** [install-recursive] Error 1 *** Error code 2 Stop in /usr/

iSCSI setup

that source in the kernel and have it compiled? What I need to add to my kernel config file? Is there an howto specifying how to reach the final result of having my FreeBSD boot and mount then iSCSI drive to /iSCSI/myvolume? Thanks a lot ___ fr

Prevent process in disk wait

Hello list, While installing the Ruby port on a 6.1-Release system (uname -a FreeBSD sigma.socruel.nu 6.1-RELEASE-p6 FreeBSD 6.1-RELEASE-p6 #0: Wed Sep 20 08:40:52 CEST 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SIGMA i386) I see that the process gets into a DL+ state: 37696 p0 IW+0

mouse problem in

hi i am new about freebsd . currently i am running 6.2-PRERELEASE(?) in one of my machine . other 2 are FC5 and xp . i am using common one set of keyboard , mouse and monitor for every cpu through KVM (model REX-420 ) cpu changer . the problem is whenever i change to other os then go back to

Re: freebsd version?

2006/9/25, Andrew Pantyukhin <[EMAIL PROTECTED]>: On 9/25/06, azhar freebsd <[EMAIL PROTECTED]> wrote: > hi > can anybody tell me what is 6.2 preerelease. > > uname -a > FreeBSD belagelo.com 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #0: Sun Sep > 24 16:53:30 UTC 200

Re: freebsd version?

2006/9/26, Jerry McAllister <[EMAIL PROTECTED]>: On Mon, Sep 25, 2006 at 04:35:07PM +0900, azhar freebsd wrote: > hi > can anybody tell me what is 6.2 preerelease. Just what it says. It is a FreeBSD 6.2 that has not been officially released yet. The present official release is 6.

freebsd version?

hi can anybody tell me what is 6.2 preerelease. uname -a FreeBSD belagelo.com 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #0: Sun Sep 24 16:53:30 UTC 2006 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/GENERIC i386 [EMAIL PROTECTED] azhar ___ freebsd

Gnome 2.14

ded to run *portupgrade -a* to make sure you get all the necessary ports. from site . http://www.freebsd.org/gnome/docs/faq214.html [EMAIL PROTECTED] -a FreeBSD belagelo.com 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i3

installing GNOME 2.14

hi i am new about freebsd . recently i am tried to install GNOME 2.14executing the following command # pkg_add -r gnome2 but when i check the install package it shows as follows . [EMAIL PROTECTED] | grep gnome2 gnome2-2.10.2 The "meta-port" for the GNOME 2 integrated X11 desk

Re: Newbie Experience #2

Must have missed your rant Bob. You may want to check out PC-BSD<http://www.pcbsd.org>, a graphical installer that loads the KDE desktop on completion and rides on FreeBSD 6.1-RELEASE-p2. If your hardware is supported in FreeBSD then it's pretty painless. I dropped Windows at my

where is my adduser.conf file ?

hi all i am new abt freebsd . it may be very simple problem but i am lost . help me ! [EMAIL PROTECTED]/etc# uname -a FreeBSD mine.freebsd.org 6.0-RELEASE FreeBSD 6.0-RELEASE #1: Wed Aug 30 13:08:32 JST 2006 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/MYGENRIC-001 i386 [EMAIL PROTECTED]/etc

Unable to install on CompaQ D310

rives found!". The ATA controller is found in the dmesg log and the CD is obviously working. The machine is a 2.4 P4 with 768Mb and 60Gb ata disk. Any ideas? _______ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listin

Re: problems with creating bind9 under a jail (make: don't know how to make /usr/jail/bind9/usr/lib/libc.a. Stop)

On 8/30/06, Lowell Gilbert <[EMAIL PROTECTED]> wrote: "freebsd neophyte" <[EMAIL PROTECTED]> writes: > > ...snip... > > --- > # make world DESTDIR=/usr/jail/bind9 > > --

problems with creating bind9 under a jail (make: don't know how to make /usr/jail/bind9/usr/lib/libc.a. Stop)

hine (an ultra5) that was booted from a CD, but pulled files from an FTP server. any help will be greatly appreciated ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Understanding CARP

Hi I'm new to FreeBSD but I'm loving it very much! I'm experimenting with CARP to create a redundant router/firewall. I created a functioning two machine routing cluster and it works very well while configured for failover. I'm going to test it with load balancing and I&#x

SCSI disks spinning down

SCSI subsystem somewhere on FBSD or a jumper setting on the drive or what. I'm not even sure I can turn it off so the drives don't spin down. Any ideas, anyone? Thanks! _______ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/ma

Re: so for kicks, i just ...

. yscrappy Skype: hub.orgICQ . 7615664 _______ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: BSDstats Project v1.0

Just added 'country' stats to the mix, to see what our distribution is per country ... On Sun, 6 Aug 2006, User Freebsd wrote: I just threw up a couple of very simple tables, showing # of systems reporting in this month, as well as a break down of release / architecture for

<    1   2   3   4   5   6   7   8   >