Is this a feature or a bug?: system hanging if loading the if_tun module at the boot time while it is already compiled in the kernel.

__ The Issue: Hi... we had the following issue: the system hanging with FreeBSD 7.1, amd64. It seems that the reason in loading the if_tun module at the boot time (/boot/loader.conf: if_tun_load=YES), while it is already compiled in the

Re: Looking for 32-bit PCI SATA RAID contoller supported under FreeBSD 6.2/7.0

Thanks to David Mark and Bill - Think, we'll try High Point's one. ) David Robillard wrote: Does annybody know some 32-bit PCI SATA RAID contoller supported under FreeBSD 6.2/7.0? Take a look at http://www.highpoint-tech.com/ Good cards which are well supported in FreeBSD.

Looking for 32-bit PCI SATA RAID contoller supported under FreeBSD 6.2/7.0

Hi, people! Does annybody know some 32-bit PCI SATA RAID contoller supported under FreeBSD 6.2/7.0? [we have an old mailserver with only 32-bit PCI slots in it] Thanks in advance, --les. -- Best regards, Leonid E.

Re: MOXA serial multi-port PCIe boards and FreeBSD 7.0R

OK, thank you very much! I also found the solution: http://www.freebsd.org/cgi/query-pr.cgi?pr=119515 Andrew Pantyukhin wrote: On Tue, Mar 25, 2008 at 11:51:41AM +0300, Leonid Satanovsky wrote: Hello, people! Does anybody know whether any of the MOXAs' serial

MOXA serial multi-port PCIe boards and FreeBSD 7.0R

Hello, people! Does anybody know whether any of the MOXAs' serial multi-port PCIe boards are supported under FreeBSD 7.0R? // ( non of them was found in sys/dev/puc/pucdata.c )// - Thanks in

Kernel compilation error for 7.0 ( with IPSEC )

Hi, people! I've just CvsUPed the src-all collection for RELENG_7_0 [This is a 7.0-RELEASE, as I understand, am I correct? ] trying to compile the source with IPSEC reselts in the following: --- ...

SATA raid controller on Asustek's P5M2-M

Hello, people! Does anybody know whether the SATA raid controller on Asustek's P5M2-M motherboard is supported by FreeBSD 6.3 ... or 7.0? -- We are choosing a motherboard for a low-end mail server (this is a small company with lots of mail,... and the host will also

Re: Question about restore

Hi there! (1) You MAY TRY Frenzy [ http://frenzy.org.ua/en/ ] FreeBSD LiveCD distribution for the task. I didn't, but, I think, it MAY help you. )

Re: The question about Broadcom BCM5721 ethernet adapter integrated in motherboard, on PCIe and FreeBSD6.3

and the fix, shown in this PR, is easy to implement. Basically, boot FreeBSD, if the chip isn't detected, run pciconf and take the output and patch the driver detection and you should be fine. Ted -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Leonid

The question about Broadcom BCM5721 ethernet adapter integrated in motherboard, on PCIe and FreeBSD6.3

Hi all! The question is: will FreeBSD 6.3 support Broadcom BCM5721 ethernet adapter integrated in motherboard (it's on PCIe bus) ? The motherboard is ASUSTeK P5M2-M (RTL)