Hi,
hello folks,
i want to install the packet filter for FreeBSD so i recompile the
kernel with the options :
device bpf
options PFIL_HOOKS
options RANDOM_IP_ID
and installed pf from ports ( i did a cvsup before installing to
get the
Message-
From: Cristi Tauber [mailto:[EMAIL PROTECTED]
Sent: 28 September 2004 11:19
To: Philip Payne
Cc: FreeBSD Question
Subject: RE: pf for FreeBSD
Hello,
i'm using 5.2.1 and i want to recompile pf to take
advantage of ALTQ.
This was the reason for reinstalling. What
IMHO its not very hard in FreeBSD 5.3 either now its in the base. The only
additional step to what you describe below is adding the kernel options
building/installing the kernel to include them, which is only 2 commands.
However, some of the log analysis ports I've tried (fwanalog... another
# cvsup -g -L 2 supfile
# portsdb -uU
# pkgdb -F
# port_version
# portupgrade -a
And what does make index actually do? Do I need it?
You missed a step between cvsup and portupgrade.
less /usr/ports/UPGRADING
... and read, to check out what will happen when certain
Hi Adam,
Am Donnerstag, 23. September 2004 01:54 schrieb Adam Smith:
On Wed, Sep 22, 2004 at 02:59:35PM +0100, Philip Payne said:
Didn't use Konsole but I am using KDE. It appears to be a
problem in
aterm xterm, but strangely not Eterm.
Exactly what I found, too. Any compiles I
-
From: Philip Payne [mailto:[EMAIL PROTECTED]
Sent: 21 September 2004 23:16
To: Lowell Gilbert
Cc: FreeBSD Questions (E-mail)
Subject: RE: Portinstall problem (config.guess not found)
Snipped the rest of the debug
cp: /usr/ports/devel/gmake/work/make-3.80/config
/usr/ports/devel
I just rebuilt the machine as the problem was doing my
head-in. Freebsd
5.3-beta5. Basically, X-Developer distro with KDE installed
as desktop.
The first port I try to to install is generally CVSUP. I get the
config.guess not found error straight away... as below.
I am not sure
Philip Payne [EMAIL PROTECTED] writes:
Hi,
I'm getting the following error when trying to build any port.
/usr/ports/portname/work/config.guess: No such file
or directory.
I've googled searched the mailing list archives which
gave 2 suggestions.
Autoconf
Ooer... this gets weirder... see below...
Philip Payne [EMAIL PROTECTED] writes:
Hi,
I'm getting the following error when trying to build any port.
/usr/ports/portname/work/config.guess: No such file
or directory.
I've googled searched the mailing list archives
Snipped the rest of the debug
cp: /usr/ports/devel/gmake/work/make-3.80/config
/usr/ports/devel/gmake/work/make-3.80/config/config.guess:
No such file
or directory
*** Error code 1
Stop in /usr/ports/devel/gmake.
*** Error code 1
Stop in /usr/ports/lang/ezm3.
*** Error code
Hi,
I'm getting the following error when trying to build any port.
/usr/ports/portname/work/config.guess: No such file or directory.
I've googled searched the mailing list archives which gave 2 suggestions.
Autoconf or libtool have got fubar'd and I should reinstall and/or to cvsup
Hi, I'm quite new to the world of linux, and I are going to
set up a linux
server, and I'm looking aroud for a good linux system, and I
find FreeBSD
quite interesting. Does FreeBSD have a X-mode and is it easy
to handle?
Whats the difference between FreeBSD, Slackware and Redhat?
On Thursday 02 September 2004 01:45 am, Philip Payne wrote:
Well, png is up to png-1.2.5_8 and if you did a recent cvsup and
recreated your INDEXs, that is what you should be seeing.
OK, portupgrade(1) _is_ looking for 1.2.5_8 but it is
trying to get it
from
ftp
Well, png is up to png-1.2.5_8 and if you did a recent cvsup and
recreated your INDEXs, that is what you should be seeing.
OK, portupgrade(1) _is_ looking for 1.2.5_8 but it is trying to get it
from
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-4.9-release/All
where the version
Hi,
SNIP
#ipfw list
00100 allow ip from any to any via lo0
00200 deny ip from any to 127.0.0.0/8
00300 deny ip from 127.0.0.0/8 to any
00400 allow icmp from any to any
00500 allow tcp from any to any established
00600 allow ip from any to any frag
00700 allow ip from me to any setup
Hi,
Is this something obvious like the default gateway not being set on either
of the PC's in question.
Without seeing the IP setup its not obvious.
Cheers,
Phil.
-Original Message-
From: Andras Kende [mailto:[EMAIL PROTECTED]
Sent: 18 August 2004 17:34
To: 'lily'; [EMAIL
Hi Jonathan,
will be able to work. My box is located at a datacebter and my box is
allocated with about 90 IP addresses (and also the main
server IP which
was given to me when i first purchased the line). I would
like to know
how to configure /etc/rc.firewall to support my MAIN ip and
steve,
Yes everything else seems to work fine. There are
currently 2 PCs
with this issue. 1 is XP the other is Win2k. This ruleset worked
fine on FreeBSD 5.1, but I reformatted the box, and install 5.2.1
uploaded the rc.firewall.rules and natd.conf files, since the network
John Lee wrote:
dear all,
i'm using a freebsd 4.10-stable server with 50 IP addresses.
Is there any program i can install that will be able to tell me:
- how much bandwidth (ie. kbps) each individual IP is using?
trafcount seems to count total traffic only, any idea?
Hi,
Upgraded KDE yesterday to 3.2.1 . KDM was upgraded.
Now, whenever I try to login to KDE it always starts the failsafe i.e. a
single xterm.
It doesn't matter what session type I select in KDM, I always get failsafe
so no KDE for me.
If I start KDE using startx and a .xinitrc with exec
This is not a troll.
I've installed FreeBSD 5.2 on a spare SCSI drive and am
compiling kernels,
updating ports, etc,etc. Thus far, other than some minor
hassles, it's
equivilent to my Debian sid.
I have to ask: Why FreeBSD rather than Linux?
My personal experience.
4 years ago I
I'm a newbie to your OS, Does Free BSD have the KDE and Gnome
GUI already
installed? Do you have plans in making the installation more
user friendly
in the future?
Like any newbie I heartily recommend reading through the handbook under
the documentation section of www.freebsd.org . I
Hi Dan,
Hello, i am trying to make my webserver accessible to the net, i tried
to run the out of the box rc.firewall, but there was some
default rules
which blocked the 192.168.0 network which is my local lan
lol, so killed
it instead of helped it, anyway i tried setting it to open, but
Hi,
However, I can't get the config to work. I've commented out
all the deny
rules. In this instance, I can browse the web via SQUID
that's installed
on the IPFW box. I can't browse the web directly, though.
That is the
only external access I get. I can't ping any sites, DNS
Hi,
I'm 99% your sufile needs to read (but nowhere near my machine to check):
src-all
ports-all release=cvs
ports-base release=cvs
ports-all tag=.
So that you get the head of the source tree for ports.
Phil.
/usr/sup/refuse looks like this:
src/etc/sendmail/freebsd.mc*
Hi,
I am wondering why there was 4.9 release if the newest one it
5.1. Whick
is better I am currently on 5.1. It's a little confusing.
Well there be
a 4.10 and 5.2 release at the same time?
A lot of people are going to give you an RTFM style response back to the
install
Hi Chris,
The net address and subnet mask combination that is 96.0.0.0/3 covers the
range 96.0.0.0 to 127.255.255.255.
You are therefore blocking all traffic to the localhost address (127.0.0.0)
Now, I'm a networking bloke not an MIS person but I would assume this is BAD
as services/apps on
Hi,
I thought I would've been the millionth person to ask this but I had a look
in the archives and couldn't find anything so feel free to tell me to RTF
relevant article.
Can someone help me setup Java MozillaFirebird? I've installed both
MozillaFirebird and JDK14 from ports but on java
On Fri, Aug 22, 2003 at 01:59:29PM +0100, Philip Payne wrote:
I thought I would've been the millionth person to ask this
but I had a look
in the archives and couldn't find anything so feel free to
tell me to RTF
relevant article.
Can someone help me setup Java MozillaFirebird
On Fri, Aug 22, 2003 at 01:59:29PM +0100, Philip Payne wrote:
What you need is the java plugin -- it's a loadable object that adds
java capabilities to Netscape, Mozilla and (I think) Mozilla derived
browsers like Firebird.
The plugin is a standard part of the JDK, except that the FreeBSD
Hi,
I have a gatway box running freebsd 4.8 and several links to
the internet
via different ISP's.
This box is connected directly to one of the ISP's but also
has access to
the other gatways via the LAN.
I would like to setup static backup (default) routes such
that when and if
the
Hi,
Hi all...I'm at a dead end here. I'm trying to setup my firewall/nat
box to forward requests on externalIP:portA to
internalPC:portB. I put
'natd_flags=-redirect_port tcp 1internalPC:portB portA ' in
my rc.conf
file, and I have the following three statements in my rc.firewall
I have a question about cvsup. I read the manual and can
update my ports with no
problem. Here is my question though...what if I was to
change the Makefile for a port?
Is there a way I can still use CVSup to update my ports and
merge the changes I made
in the old Makefile with
HI,
I ftp'd a file from windows to freebsdnot its every line
has ^M at its
end.
Is there some command in vi (or some way) by whcih ^M can be removed.
Thanks
Anil
At the vi command line
:1,$:s/here type ctrl-v then ctrl-M to get the ^M control character//
Basically it's just
Hi,
Hi all of the freeBSD team, I'm from Indonesia, and I'm interest
with the software, if it is a free software then where I can
get it?? and
download it, globaly I'm still learn the basic of the system,
may I know the
address to download FreeBSD software. Thank you
As per anything
Hi,
Does anyone know how to change gnome fonts
from KDE/command-line? I tried running
gnome-control-center, which worked, but only
the fonts for the control center and gthumb
have changed.
I posted recently about this. Look for subject Changing GTK fonts outside
gnome in the archive. It may
Hi,
So far, I known firewall is a choice when I want
to protect my boxes from crackers but my question is
if I closed the service I don't use (such as port 25
for STMP) so the cracker out there can't attack,
what's the reason firewall come to play ?
From a general viewpoint the more
Paul Robinson ([EMAIL PROTECTED]) [030606 19:09]:
If they aren't enthusiastic, it's because it's not solving
any problems for
them. The fact it works great as a high-traffic MX or HTTP
server isn't
something most businesses need. As for desktop use, well,
it does suck
Hi,
Hi all...
I found this ()
I have FBSD 4.7 system...is this article still ok or even the
best way to go?
Any ideas welcome
Keith
There's a specific chapter in the handbook on adding swap... which includes
a section on using a swapfile as you detailed:
Hi,
This is a pretty basic question so I don't mind if the answer is an RTFM
style link. ;-)
I recently obtained some 3rd party POP3 mailboxes unrelated to my current
ISP for email to a new domain... unfortunately my ISP's smtp server doesn't
let me send any email addressed as anything other
Hi,
I recently upgraded Xfree4 via portupgrade (portupgrade -a) and I now have a
problem. It appears X will only work in 8-bit mode. Before, my XF86Config
specified the default bit depth as 24 and X was fine. Now X fails to start
at anything over 8-bit... I mean, it starts... it just hangs after
I'm running FreeBSD 4.7-RELEASE and I have trouble routing between two
NIC's. On one side I have a 192.168.1.0/24 network and on the
other a 212.110.94.64/27
network on which I have mail and web servers, which the 192.168.1.0/24
hosts should be able to reach.
Here are the ifconfig and
Hi,
I don't know how much you know about DNS so if I aim too low then ignore me
otherwise read on for a full explanation. I strongly suspect you're
suffering from the fact that your old address is simply cached on various
resolvers around the internet and you've just got to wait until it times
Hi,
CVS Tag list:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvs-tags.html
Phil.
-Original Message-
From: Tuc [mailto:[EMAIL PROTECTED]]
Sent: 21 February 2003 14:08
To: [EMAIL PROTECTED]
Subject: CVSUP of 4.7 only?
Hi,
I have :
*default release=cvs
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvs-
tags.html
So if I read it right:
RELENG_4_7_0_RELEASE - First ever 4.7 release. Oldest and never
updated past that day it was tagged
RELENG_4_7 - More current than _RELEASE, but only with critical
Hi,
Can anyone suggest a reason why I might see the following problem. Two
remote FreeBSD machines. Box-1 is running 4.X-Stable and Box-2 is running
5.0-RELEASE. The same sshd_config on both. I'm ssh'ing to them from box-3
which is another 4.x-stable machine.
If I ssh from box-3 to box-1
I was wondering can anyone tell me the correct procedure for
updating my
sources to the current 4.7 source.
If you haven't already I can recommend reading the following chapter in the
Handbook
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cutting-edge.html
I'd never attempted
Also, scbus da are required to build including umass.
Phil.
-Original Message-
From: Andrew Y Ng [mailto:[EMAIL PROTECTED]]
Sent: 09 January 2003 15:30
To: jeremy
Cc: [EMAIL PROTECTED]
Subject: Re: help
i saw one problem at least, device ed requires device miibus
and it was
48 matches
Mail list logo
