RE: SCSI Disk not found

From: Michael E. Mercer The drive that can not be found is a Western Digital WD Enterprise 4360 4.3 GB Wide-Ultra SCSI I have removed the second SCSI controller card (PCI) and the Seagate SCSI Hard Drive. It's been a while--but if you're saying you removed the drive that fbsd sees and

RE: Questions about updating...

From: rotten rottie I installed a box for trial it was 5.1, I wanted to see if I could use ports to update openssh for a test examp. After the port installed I noticed that another version of openssh was installed on the system. I Bad test example. As with named, sendmail and a few others

RE: SCSI Disk not found

From: Michael E. Mercer Ok, its the System Configuration Utility supplied by Compaq not the BIOS. Michael Just to jump in...after reading the thread you probably have hardware raid 0 (mirroring) on the system using 2 controllers and 2 drives--the Compaq cu should tell you what's going on.

dwl650 4.9

Hey folks, IBM thinkpad p3/450 with a dwl650/prism 2.5 which works with win98 knoppix 3.2 but isn't detected with fbsd 4.9-R. Google doesn't seem to indicate any issues with 4.9 other than a sleep/timeout issue. I'm d/l'ing 5.1 to give it a try but if I'm missing something silly or someone has

RE: dwl650 4.9

From: Riley J. McIntire It doesn't detect a linksys 10/100 card either. Didn't test it with Knoppix but this card worked recently with w98. Are there any issues with thinkpad 390x? dmesg is below. Just to followup fbsd 5.1 detects the dwl650 and installs the wi driver. Seems to be an issue

where's sasl.h?

Hi all, I'm trying to install ASMTP for sendmail with sasl by modifying /etc/make.conf with the following: SENDMAIL_CFLAGS+= -I/usr/local/include -DSASL=2 SENDMAIL_LDFLAGS+= -L/usr/local/lib SENDMAIL_LDADD+=-lsasl2 cyrus-sasl was installed via ports after deinstalling cyrus-sasl2.

RE: where's sasl.h?

SENDMAIL_CFLAGS+= -I/usr/local/include -DSASL=2 SENDMAIL_LDFLAGS+= -L/usr/local/lib SENDMAIL_LDADD+=-lsasl2 cyrus-sasl was installed via ports after deinstalling cyrus-sasl2. But I didn't change the cyrus-sasl2 flags to the cyrus-sasl flags. I hate that. sigh. Riley To

RE: where's sasl.h?

But I didn't change the cyrus-sasl2 flags to the cyrus-sasl flags. I hate that. sigh. Riley Unfortunately that didn't fix it. /etc/make.conf now has: SENDMAIL_CFLAGS+= -I/usr/local/include -DSASL SENDMAIL_LDFLAGS+= -L/usr/local/lib SENDMAIL_LDADD+=-lsasl cyrus-sasl is installed.