I forgot to add to this ... that if you monitor tcp/ip traffic with
tcpdump you can compare a sucessful connection on the internal lan with
a failure on when trying to connect to something on the internet.
Doing this you can see the syn-ack-syn process of a successful
pop/smtp/www connection on t
I have had exactly the same experience with linux, using mandrake 10.
Everything works from my linux box on the lan to other hosts on the lan.
When I try to telnet on ports 22(ssh),25(smtp),80(http) and 110(pop3)
NOTHING WORKS. I can browse the web and send/recieve email with
Evolution/Thunderbird
Just to update you on the D-Link 504T problem. After some weeks and a
relocation I've been able to dig further in it and come to the
conclusion that the 504T (mind the 'T') is buggy.
Both the D-Link European help desk and the following page confirmed
what I suspected:
http://www.broadbandrepor
John Mills writes:
> First, are you coming into your LAN from outside, or going outwards?
Either ways.
> If it's an outgoing-connection problem, I would look into the
> firewall setting of the FBSD box. Maybe you set didn't set it up to
> pass the ports for outgoing telnet and ssh, or maybe y
Walter -
On Fri, 14 May 2004, Walter C. Pelissero wrote:
> My problem is that ssh and telnet don't work. I get as far as the
> Password prompt, I type it in, and then ssh freezes for a couple of
> minutes until it probably goes in timeout and gives up.
Before we blame the router, a little more
Try connection to the router via SSHv1 protocol and without X11 forwarding. I had
similar problems with Cisco routers with old Cisco IOS. They liked only SSH
connections via SSHv1 and without X11 forwarding.
Best regards,
Vladimir
On Fri, 14 May 2004 13:12:33 +0200 (CEST)
Konr
On Fri, 14 May 2004, Walter C. Pelissero wrote:
> I'm trying to make work a D-Link 504T DSL router/switch with FreeBSD
> 5.2.1-RELEASE-p6.
>
> I've already realised that IPv6 is not supported by the router so I
> compiled an IPv4-only kernel and got to work DNS, HTTP, and FTP.
>
> My problem is t
I'm trying to make work a D-Link 504T DSL router/switch with FreeBSD
5.2.1-RELEASE-p6.
I've already realised that IPv6 is not supported by the router so I
compiled an IPv4-only kernel and got to work DNS, HTTP, and FTP.
My problem is that ssh and telnet don't work. I get as far as the
Password p
