Hi all, I'm running 5.2.1-RELEASE-p3 on my server, but it reboots under heavy (disk/cpu) load. The problem can be reproduced. Running with my kernel or the GENERIC kernel makes no difference. Unfortunately the crash dumps somehow don't work. Here is some info about the server (Compaq Proliant 400, P3-550, 512Mb ECC memory, 2x 18Gb with Mylex DAC-960 RAID 1): FreeBSD defiant.unix-asp.com 5.2.1-RELEASE-p3 FreeBSD 5.2.1-RELEASE-p3 #9: Mon Mar 22 12:51:19 CET 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/DEFIANT i386
acpidump.txt available upon request. defiant# less hw.acpi.txt hw.acpi.supported_sleep_state: hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: S1 hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 5 hw.acpi.s4bios: 0 hw.acpi.verbose: 0 hw.acpi.disable_on_poweroff: 1 hw.acpi.reset_video: 1 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p2 #8: Wed Mar 17 11:56:21 CET 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/DEFIANT Preloaded elf kernel "/boot/kernel/kernel" at 0xc082a000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc082a0cc. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium III/Pentium III Xeon/Celeron (497.84-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR,SSE> real memory = 536870912 (512 MB) avail memory = 511844352 (488 MB) Pentium Pro MTRR support enabled VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc00c0cfd (c0000cfd) VESA: S3 Incorporated. Savage4 ACPI-0264: *** Error: Looking up [\\_SB_.PCI0.IBRG.ECP0] in namespace, AE_NOT_FOUND ACPI-1287: *** Error: , AE_NOT_FOUND npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <COMPAQ CONTACT > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00edb90 acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 ACPI-0438: *** Error: Looking up [MLEN] in namespace, AE_NOT_FOUND SearchNode 0xc1cea780 StartNode 0xc1cea780 ReturnNode 0 ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node 0xc1cea780), AE_NOT_FOUND acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 15 INTA is routed to irq 11 pcib0: slot 16 INTA is routed to irq 9 pcib0: slot 20 INTD is routed to irq 9 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x44000000-0x47ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <PCI-PCI bridge> at device 13.0 on pci0 pci2: <PCI bus> on pcib2 pcib0: slot 13 INTA is routed to irq 11 pcib2: slot 4 INTA is routed to irq 11 pcib0: slot 13 INTB is routed to irq 10 pcib2: slot 5 INTA is routed to irq 10 pcib0: slot 13 INTD is routed to irq 9 pcib2: slot 7 INTA is routed to irq 9 sym0: <895> port 0x1000-0x10ff mem 0x40100000-0x40100fff,0x40300000-0x403000ff irq 11 at device 4.0 on pci2 sym0: No NVRAM, ID 7, Fast-40, SE, parity checking fxp0: <Intel 82558 Pro/100 Ethernet> port 0x1c00-0x1c1f mem 0x40000000-0x400fffff,0x40500000-0x40500fff irq 10 at device 5.0 on pci2 fxp0: Ethernet address 00:50:8b:2e:70:2d miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci2: <display, VGA> at device 6.0 (no driver attached) pci2: <base peripheral> at device 7.0 (no driver attached) xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem 0x42100000-0x4210007f irq 11 at device 15.0 on pci0 xl0: Ethernet address: 00:01:02:9c:3e:cc miibus1: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus1 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto mlx0: <Mylex version 2 RAID interface> port 0x2080-0x20ff mem 0x42200000-0x4220007f irq 9 at device 16.0 on pci0 mlx0: DAC960P/PD, 2 channels, firmware 2.73-0-00, 32MB RAM mlxd0: <Mylex System Drive> on mlx0 mlxd0: 17357MB (35547136 sectors) RAID 1 (online) GEOM: create disk mlxd0 dp=0xc4794a8c isab0: <PCI-ISA bridge> at device 20.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x2420-0x242f at device 20.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2400-0x241f irq 9 at device 20.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 20.3 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 orm0: <Option ROMs> at iomem 0xe0000-0xe7fff,0xd0000-0xd07ff,0xca000-0xcffff,0xc0000-0xc9fff on isa0 pmtimer0 on isa0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 497837655 Hz quality 800 Timecounters tick every 10.000 msec IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled acd0: CDROM <CD-ROM 40X/AKU> at ata0-slave PIO4 Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS mode change from SE to SE. sa0 at sym0 bus 0 target 4 lun 0 sa0: <SONY SDT-5200 3.30> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 8) Mounting root from ufs:/dev/mlxd0s1a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted /tmp: mount pending error: blocks 992 files 0 WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted WARNING: /var/ftp was not properly dismounted WARNING: /home was not properly dismounted met vriendelijke groet / with kind regards, Remy de Ruysscher <blocked::mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] [EMAIL PROTECTED] <blocked::mailto:[EMAIL PROTECTED]> ---- Microsoft: Where do you want to go today? Linux: Where do you want to go tomorrow? FreeBSD: Are you guys coming or what?
smime.p7s
Description: S/MIME cryptographic signature