Hi,
so does anybody know what could be wrong with this?
Thanks!
Pierre-Luc Drouin
Pierre-Luc Drouin wrote:
Hi,
My motherboard (EVGA X58 Classified) has a JMicron JMB363 SATA300/PATA
controller and it seems to be working fine with FreeBSD as long as I
don't try burning a DVD or a CD with my P
Hi,
My motherboard (EVGA X58 Classified) has a JMicron JMB363 SATA300/PATA
controller and it seems to be working fine with FreeBSD as long as I
don't try burning a DVD or a CD with my PATA DVD burner, which is the
only device hooked to the controller. However, when I try burning a CD
or a DVD
The servers internal NIC is a Intel 1000 Gigabit card, using the em0 driver. I
never
had an issue with it w/ the 5.x or 6x series or freebsd, so I suspect a buggy
driver in 7.0
/var/log/messages contains spams of these messages:
kernel: interrupt storm detected on "irq19:"; throttling interrup
;> >
>> > There is no workload: the storm is there right from the boot of OS.
>> >
>> >>
>> >>
>> >> >> Perhaps you could inform us after you have researched it?
>> >> >
>> >> > I do not have a plain idea about
I would start with the name of the SATA controller and drive and see
whether someone else has had the same problems (search archives and
google). Then i'd probably check temperatures, chipsets, try -CURRENT
(for driver updates to see whether that fixes it) and go from there.
See if you can id
On 27/03/07, Sten Daniel Soersdal <[EMAIL PROTECTED]> wrote:
Vlad GURDIGA wrote:
> After running this:
>
> /sbin/atacontrol reinit ata2
>
> the storm was gone.
> My HDD in on ata4:
>
> #atacontrol info ata4
> Master: ad8 Serial ATA II
> Slave: no device present
>
>
> Why?
>
Could be one
Vlad GURDIGA wrote:
> After running this:
>
> /sbin/atacontrol reinit ata2
>
> the storm was gone.
> My HDD in on ata4:
>
> #atacontrol info ata4
> Master: ad8 Serial ATA II
> Slave: no device present
>
>
> Why?
>
Could be one of any number of reasons and my guess is that the drive
w
After running this:
/sbin/atacontrol reinit ata2
the storm was gone.
My HDD in on ata4:
#atacontrol info ata4
Master: ad8 Serial ATA II
Slave: no device present
Why?
On 25/03/07, Vlad GURDIGA <[EMAIL PROTECTED]> wrote:
On 25/03/07, Josh Carroll <[EMAIL PROTECTED]> wrote:
> > I've
On 25/03/07, Josh Carroll <[EMAIL PROTECTED]> wrote:
> I've changed motherboard recently (now it is Intel DP965LT) and now I
> have my PC slowed down considerably. vmstat -i shows a huge amount of
> interrupts on irq17: atapci0:
Do you have atapicam enabled or being loaded as a module?
No, I d
On Sat, Mar 24, 2007 at 07:35:43PM -0400, [EMAIL PROTECTED] wrote:
> >>I've changed motherboard recently (now it is Intel DP965LT) and now I
> >>have my PC slowed down considerably. vmstat -i shows a huge amount of
> >>interrupts on irq17: atapci0:
> >
> >Do you have atapicam enabled or being loade
I've changed motherboard recently (now it is Intel DP965LT) and now I
have my PC slowed down considerably. vmstat -i shows a huge amount of
interrupts on irq17: atapci0:
Do you have atapicam enabled or being loaded as a module? If so, I
have the same problem, which is currently being tracked in
I've changed motherboard recently (now it is Intel DP965LT) and now I
have my PC slowed down considerably. vmstat -i shows a huge amount of
interrupts on irq17: atapci0:
Do you have atapicam enabled or being loaded as a module? If so, I
have the same problem, which is currently being tracked in
Hello,
I've changed motherboard recently (now it is Intel DP965LT) and now I
have my PC slowed down considerably. vmstat -i shows a huge amount of
interrupts on irq17: atapci0:
interrupt total rate
irq1: atkbd0 12535 4
irq12: psm0
a message about an IRQ storm on the
> printer port being "throttled". Killing the job took care of this.
>
> Has anyone else had an issue like this? Firefox printing isn't
> critical but it's always nice to know what's going on.
The default value of hw.intr_s
I was printing with native Firefox 1.5.0.1 (FreeBSD 6.0) with CUPS, which
Firefox sees and recognizes. The printer (Xerox N17, local, parallel port)
started cycling through waiting-processing-waiting messages. Rebooting, I saw
a message about an IRQ storm on the printer port being "thro
15 matches
Mail list logo
