Here's the fix: http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/if_sk.c.diff?r1=1.51&r2=1.52 <http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/if_sk.c.diff?r1=1.51&r2=1.52>
-- Michal Belczyk
do to severe incompatibility problems with my previous motherboard's IDE and fbsd5.3, i recently purchased a new gigabyte 865PE, complete with onboard marvell nic. :(
from dmesg (after applying identifying patch) ---- skc0: <Marvell Gigabit Ethernet> port 0xac00-0xacff mem 0xfb000000-0xfb003fff irq 20 at device 9.0 on pci2 skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter skc0: PN: Yukon 88E8001 skc0: EC: Rev. 1.3 skc0: MN: Marvell skc0: SN: AbCdEfG5ca025 sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:0f:ea:5c:a0:25 miibus0: <MII bus> on sk0 ----
unfortuantely, this motherboard too has severe problems. although the nic is recognised at install/boot, it simply *refuses* to come up. dhclient just draws a blank.
i have tried to ifconfig sk0 up and down a few times, but makes no difference.
i tried to apply Michal's above patch off an absolute fresh install. ie. the *very* first thing i did sadly, only 1 of the 2 chunks succeeded.
from if_sk.c.rej
***************
*** 2425,2431 ****
/* serial mode register */
DPRINTFN(6, ("sk_init_yukon: 9\n"));
SK_YU_WRITE_2(sc_if, YUKON_SMR, YU_SMR_DATA_BLIND(0x1c) |
- YU_SMR_MFL_VLAN | YU_SMR_IPG_DATA(0x1e));
DPRINTFN(6, ("sk_init_yukon: 10\n"));
/* Setup Yukon's address */--- 2425,2432 ----
/* serial mode register */
DPRINTFN(6, ("sk_init_yukon: 9\n"));
SK_YU_WRITE_2(sc_if, YUKON_SMR, YU_SMR_DATA_BLIND(0x1c) |
+ YU_SMR_MFL_VLAN | YU_SMR_MFL_JUMBO |
+ YU_SMR_IPG_DATA(0x1e));
DPRINTFN(6, ("sk_init_yukon: 10\n"));
/* Setup Yukon's address */
---
note, i cannot cvsup to latest RLEENG_5, because i have no network! :(
any ideas on what to do from here? although the patch did not work automatically, i could manually insert the code, but i am well aware of the problems that may cause!
if anyone (in europe) is able to help me solve this issue, i will gladly send them my old ASRock PE ProHT motherboard!
its in perfect condition and works fine with freebsd4.10 - tragically, 5.3 refuses to work with the onboard sis IDE controller...
much thanks,
--- craig.freebsd at online.de
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
